linux-kernel - [PATCH 3/6] arm64: dts: qcom: sm8150: use 'gpios' suffix for PCI GPIOs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20231111164229.63803-3-krzysztof.kozlowski@linaro.org>
Date:   Sat, 11 Nov 2023 17:42:26 +0100
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 3/6] arm64: dts: qcom: sm8150: use 'gpios' suffix for PCI GPIOs

Linux handles both versions, but bindings expect GPIO properties to
have 'gpios' suffix instead of 'gpio':

  sa8155p-adp.dtb: pci@...0000: Unevaluated properties are not allowed ('perst-gpio' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index e39de6596a1e..9bcdc485c73a 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1878,7 +1878,7 @@ pcie0: pci@...0000 {
 			phys = <&pcie0_phy>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
 			enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
@@ -1972,7 +1972,7 @@ pcie1: pci@...8000 {
 			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
 			enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
-- 
2.34.1