>From 17fd68123d78f39a971f800de6da66522f71dc71 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 3 Oct 2023 22:16:25 +0300 Subject: [PATCH 1/2] net: phylink: move phylink_pcs_neg_mode() to phylink.c Russell points out that there is no user of phylink_pcs_neg_mode() outside of phylink.c, nor is there planned to be any, so we can just move it there. Suggested-by: Russell King (Oracle) Signed-off-by: Vladimir Oltean --- drivers/net/phy/phylink.c | 65 ++++++++++++++++++++++++++++++++++++++ include/linux/phylink.h | 66 --------------------------------------- 2 files changed, 65 insertions(+), 66 deletions(-) diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 0d7354955d62..ca9739fcb523 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -162,6 +162,71 @@ static const char *phylink_an_mode_str(unsigned int mode) return mode < ARRAY_SIZE(modestr) ? modestr[mode] : "unknown"; } +/** + * phylink_pcs_neg_mode() - helper to determine PCS inband mode + * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND. + * @interface: interface mode to be used + * @advertising: adertisement ethtool link mode mask + * + * Determines the negotiation mode to be used by the PCS, and returns + * one of: + * + * - %PHYLINK_PCS_NEG_NONE: interface mode does not support inband + * - %PHYLINK_PCS_NEG_OUTBAND: an out of band mode (e.g. reading the PHY) + * will be used. + * - %PHYLINK_PCS_NEG_INBAND_DISABLED: inband mode selected but autoneg + * disabled + * - %PHYLINK_PCS_NEG_INBAND_ENABLED: inband mode selected and autoneg enabled + * + * Note: this is for cases where the PCS itself is involved in negotiation + * (e.g. Clause 37, SGMII and similar) not Clause 73. + */ +static unsigned int phylink_pcs_neg_mode(unsigned int mode, phy_interface_t interface, + const unsigned long *advertising) +{ + unsigned int neg_mode; + + switch (interface) { + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_QSGMII: + case PHY_INTERFACE_MODE_QUSGMII: + case PHY_INTERFACE_MODE_USXGMII: + /* These protocols are designed for use with a PHY which + * communicates its negotiation result back to the MAC via + * inband communication. Note: there exist PHYs that run + * with SGMII but do not send the inband data. + */ + if (!phylink_autoneg_inband(mode)) + neg_mode = PHYLINK_PCS_NEG_OUTBAND; + else + neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED; + break; + + case PHY_INTERFACE_MODE_1000BASEX: + case PHY_INTERFACE_MODE_2500BASEX: + /* 1000base-X is designed for use media-side for Fibre + * connections, and thus the Autoneg bit needs to be + * taken into account. We also do this for 2500base-X + * as well, but drivers may not support this, so may + * need to override this. + */ + if (!phylink_autoneg_inband(mode)) + neg_mode = PHYLINK_PCS_NEG_OUTBAND; + else if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, + advertising)) + neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED; + else + neg_mode = PHYLINK_PCS_NEG_INBAND_DISABLED; + break; + + default: + neg_mode = PHYLINK_PCS_NEG_NONE; + break; + } + + return neg_mode; +} + static unsigned int phylink_interface_signal_rate(phy_interface_t interface) { switch (interface) { diff --git a/include/linux/phylink.h b/include/linux/phylink.h index 2b886ea654bb..871db640ceb6 100644 --- a/include/linux/phylink.h +++ b/include/linux/phylink.h @@ -98,72 +98,6 @@ static inline bool phylink_autoneg_inband(unsigned int mode) return mode == MLO_AN_INBAND; } -/** - * phylink_pcs_neg_mode() - helper to determine PCS inband mode - * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND. - * @interface: interface mode to be used - * @advertising: adertisement ethtool link mode mask - * - * Determines the negotiation mode to be used by the PCS, and returns - * one of: - * - * - %PHYLINK_PCS_NEG_NONE: interface mode does not support inband - * - %PHYLINK_PCS_NEG_OUTBAND: an out of band mode (e.g. reading the PHY) - * will be used. - * - %PHYLINK_PCS_NEG_INBAND_DISABLED: inband mode selected but autoneg - * disabled - * - %PHYLINK_PCS_NEG_INBAND_ENABLED: inband mode selected and autoneg enabled - * - * Note: this is for cases where the PCS itself is involved in negotiation - * (e.g. Clause 37, SGMII and similar) not Clause 73. - */ -static inline unsigned int phylink_pcs_neg_mode(unsigned int mode, - phy_interface_t interface, - const unsigned long *advertising) -{ - unsigned int neg_mode; - - switch (interface) { - case PHY_INTERFACE_MODE_SGMII: - case PHY_INTERFACE_MODE_QSGMII: - case PHY_INTERFACE_MODE_QUSGMII: - case PHY_INTERFACE_MODE_USXGMII: - /* These protocols are designed for use with a PHY which - * communicates its negotiation result back to the MAC via - * inband communication. Note: there exist PHYs that run - * with SGMII but do not send the inband data. - */ - if (!phylink_autoneg_inband(mode)) - neg_mode = PHYLINK_PCS_NEG_OUTBAND; - else - neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED; - break; - - case PHY_INTERFACE_MODE_1000BASEX: - case PHY_INTERFACE_MODE_2500BASEX: - /* 1000base-X is designed for use media-side for Fibre - * connections, and thus the Autoneg bit needs to be - * taken into account. We also do this for 2500base-X - * as well, but drivers may not support this, so may - * need to override this. - */ - if (!phylink_autoneg_inband(mode)) - neg_mode = PHYLINK_PCS_NEG_OUTBAND; - else if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, - advertising)) - neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED; - else - neg_mode = PHYLINK_PCS_NEG_INBAND_DISABLED; - break; - - default: - neg_mode = PHYLINK_PCS_NEG_NONE; - break; - } - - return neg_mode; -} - /** * struct phylink_link_state - link state structure * @advertising: ethtool bitmask containing advertised link modes -- 2.34.1