[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231113-sc7280-remoteprocs-v2-0-e5c5fd5268a7@fairphone.com>
Date: Mon, 13 Nov 2023 09:56:11 +0100
From: Luca Weiss <luca.weiss@...rphone.com>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Mathieu Poirier <mathieu.poirier@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Manivannan Sadhasivam <mani@...nel.org>,
cros-qcom-dts-watchers@...omium.org
Cc: ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Rob Herring <robh@...nel.org>,
Matti Lehtimäki <matti.lehtimaki@...il.com>,
linux-arm-msm@...r.kernel.org, linux-remoteproc@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Luca Weiss <luca.weiss@...rphone.com>
Subject: [PATCH v2 00/11] Remoteprocs (ADSP, CDSP, WPSS) for SC7280
This series adds support for the ADSP, CDSP and WPSS remoteprocs found
on SC7280. And finally enable them and WiFi on the QCM6490-based
Fairphone 5 smartphone.
The first two patches are fixes for the MPSS to fix some dt validation
issues. They're included in this series to avoid conflicts with the
later patches and keep it simpler.
Then there's two patches reorganizing the reserved-memory setup for
sc7280 in preparations for the new remoteprocs.
Please note, that the ChromeOS-based devices using SC7280 need different
driver and dts support, similar to how there's already
qcom,sc7280-mpss-pas for "standard" firmware and there's
qcom,sc7280-mss-pil for ChromeOS firmware.
I'm aware of the series also adding SC7280 ADSP support with the last
revision sent in June this year.
https://lore.kernel.org/linux-arm-msm/20230616103534.4031331-1-quic_mohs@quicinc.com/
However there's some differences since that series added the "pil"
variant for ChromeOS, not "pas" for standard firmware. Also it seems on
ChromeOS devices gpr+q6apm+q6prm is used. On my device it appears to be
instead apr+q6afe+q6asm+q6adm but I don't add either in this series to
keep it a bit simpler, and I couldn't test much of that yet.
Signed-off-by: Luca Weiss <luca.weiss@...rphone.com>
---
Changes in v2:
- Add patch renaming memory@ reserved-memory nodes (preparation for
next)
- Add patch moving mpss_mem and wpss_mem to sc7280.dtsi
- Follow *_mem node being in sc7280.dtsi also for ADSP & CDSP patches
- Use (squashed) .mbn instead of (split) .mdt for FP5
- Set qcom,ath11k-calibration-variant for FP5
- Pick up tags (except for Krzysztof's R-b for ADSP & CDSP since there
were changes)
- Link to v1: https://lore.kernel.org/r/20231027-sc7280-remoteprocs-v1-0-05ce95d9315a@fairphone.com
---
Luca Weiss (11):
dt-bindings: remoteproc: qcom: sc7180-pas: Fix SC7280 MPSS PD-names
arm64: dts: qcom: sc7280: Remove unused second MPSS reg
arm64: dts: qcom: sc7280: Rename reserved-memory nodes
arm64: dts: qcom: sc7280*: move MPSS and WPSS memory to dtsi
dt-bindings: remoteproc: qcom: sc7180-pas: Add SC7280 compatibles
remoteproc: qcom_q6v5_pas: Add SC7280 ADSP, CDSP & WPSS
arm64: dts: qcom: sc7280: Use WPSS PAS instead of PIL
arm64: dts: qcom: sc7280: Add ADSP node
arm64: dts: qcom: sc7280: Add CDSP node
arm64: dts: qcom: qcm6490-fairphone-fp5: Enable various remoteprocs
arm64: dts: qcom: qcm6490-fairphone-fp5: Enable WiFi
.../bindings/remoteproc/qcom,sc7180-pas.yaml | 21 ++
arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 45 ++--
arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 35 ++-
.../boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi | 7 +-
.../boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi | 1 +
arch/arm64/boot/dts/qcom/sc7280.dtsi | 271 +++++++++++++++++++--
drivers/remoteproc/qcom_q6v5_pas.c | 19 ++
7 files changed, 336 insertions(+), 63 deletions(-)
---
base-commit: 9046efc22ed7a73cb888a8c5660a21f99c89af03
change-id: 20231027-sc7280-remoteprocs-048208cc1e13
Best regards,
--
Luca Weiss <luca.weiss@...rphone.com>
Powered by blists - more mailing lists