lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <9d79f1e4-10d7-4261-bbdf-0670db202f36@intel.com>
Date:   Tue, 14 Nov 2023 14:21:02 +0100
From:   Wojciech Drewek <wojciech.drewek@...el.com>
To:     Ivan Vecera <ivecera@...hat.com>, <netdev@...r.kernel.org>
CC:     Jesse Brandeburg <jesse.brandeburg@...el.com>,
        Tony Nguyen <anthony.l.nguyen@...el.com>,
        "David S. Miller" <davem@...emloft.net>,
        "Eric Dumazet" <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        <intel-wired-lan@...ts.osuosl.org>, <linux-kernel@...r.kernel.org>,
        Jacob Keller <jacob.e.keller@...el.com>,
        Simon Horman <horms@...nel.org>, <mschmidt@...hat.com>
Subject: Re: [PATCH iwl-next 4/5] i40e: Fix broken support for floating VEBs



On 13.11.2023 13:58, Ivan Vecera wrote:
> Although the i40e supports so-called floating VEB (VEB without
> an uplink connection to external network), this support is
> broken. This functionality is currently unused (except debugfs)
> but it will be used by subsequent series for switchdev mode
> slow-path. Fix this by following:
> 
> 1) Handle correctly floating VEB (VEB with uplink_seid == 0)
>    in i40e_reconstitute_veb() and look for owner VSI and
>    create it only for non-floating VEBs and also set bridge
>    mode also only for such VEBs as the floating ones are using

nit: Too many "also"

>    always VEB mode.
> 2) Handle correctly floating VEB in i40e_veb_release() and
>    disallow its release when there are some VSIs. This is
>    different from regular VEB that have owner VSI that is
>    connected to VEB's uplink after VEB deletion by FW.
> 3) Fix i40e_add_veb() to handle 'vsi' that is NULL for floating
>    VEBs. For floating VEB use 0 for downlink SEID and 'true'
>    for 'default_port' parameters as per datasheet.
> 4) Fix 'add relay' command in i40e_dbg_command_write() to allow
>    to create floating VEB by 'add relay 0 0' or 'add relay'
> 
> Tested using debugfs:
> 1) Initial state
> [root@...t net-next]# echo dump switch > $CMD
> [root@...t net-next]# dmesg -c
> [  173.701286] i40e 0000:02:00.0: header: 3 reported 3 total
> [  173.706701] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
> [  173.713241] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
> [  173.719507] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
> 
> 2) Add floating VEB
> [root@...t net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command"
> [root@...t net-next]# echo add relay > $CMD
> [root@...t net-next]# dmesg -c
> [  245.551720] i40e 0000:02:00.0: added relay 162
> [root@...t net-next]# echo dump switch > $CMD
> [root@...t net-next]# dmesg -c
> [  276.984371] i40e 0000:02:00.0: header: 4 reported 4 total
> [  276.989779] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
> [  276.996302] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
> [  277.002569] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
> [  277.009091] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
> 
> 3) Add VMDQ2 VSI to this new VEB
> [root@...t net-next]# echo add vsi 162 > $CMD
> [root@...t net-next]# dmesg -c
> [  332.314030] i40e 0000:02:00.0: added VSI 394 to relay 162
> [  332.337486] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None
> [root@...t net-next]# echo dump switch > $CMD
> [root@...t net-next]# dmesg -c
> [  387.284490] i40e 0000:02:00.0: header: 5 reported 5 total
> [  387.289904] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
> [  387.296446] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
> [  387.302708] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
> [  387.309234] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
> [  387.315500] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
> 
> 4) Try to delete the VEB
> [root@...t net-next]# echo del relay 162 > $CMD
> [root@...t net-next]# dmesg -c
> [  428.749297] i40e 0000:02:00.0: deleting relay 162
> [  428.754011] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left
> 
> 5) Do PF reset and check switch status after rebuild
> [root@...t net-next]# echo pfr > $CMD
> [root@...t net-next]# echo dump switch > $CMD
> [root@...t net-next]# dmesg -c
> [  738.056172] i40e 0000:02:00.0: header: 5 reported 5 total
> [  738.061577] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
> [  738.068104] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
> [  738.074367] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
> [  738.080892] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
> [  738.087160] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
> 
> 6) Delete VSI and delete VEB
> [root@...t net-next]# echo del vsi 394 > $CMD
> [root@...t net-next]# echo del relay 162 > $CMD
> [root@...t net-next]# echo dump switch > $CMD
> [root@...t net-next]# dmesg -c
> [ 1233.081126] i40e 0000:02:00.0: deleting VSI 394
> [ 1239.345139] i40e 0000:02:00.0: deleting relay 162
> [ 1244.886920] i40e 0000:02:00.0: header: 3 reported 3 total
> [ 1244.892328] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
> [ 1244.898853] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
> [ 1244.905119] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
> 
> Signed-off-by: Ivan Vecera <ivecera@...hat.com>

Reviewed-by: Wojciech Drewek <wojciech.drewek@...el.com>

> ---
>  .../net/ethernet/intel/i40e/i40e_debugfs.c    | 29 +++---
>  drivers/net/ethernet/intel/i40e/i40e_main.c   | 89 ++++++++++---------
>  2 files changed, 68 insertions(+), 50 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
> index d26348db125f..b2e3bde8ae1d 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
> @@ -829,10 +829,14 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
>  
>  	} else if (strncmp(cmd_buf, "add relay", 9) == 0) {
>  		struct i40e_veb *veb;
> +		u8 enabled_tc = 0x1;
>  		int uplink_seid;
>  
>  		cnt = sscanf(&cmd_buf[9], "%i %i", &uplink_seid, &vsi_seid);
> -		if (cnt != 2) {
> +		if (cnt == 0) {
> +			uplink_seid = 0;
> +			vsi_seid = 0;
> +		} else if (cnt != 2) {
>  			dev_info(&pf->pdev->dev,
>  				 "add relay: bad command string, cnt=%d\n",
>  				 cnt);
> @@ -844,23 +848,28 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
>  			goto command_write_done;
>  		}
>  
> -		vsi = i40e_dbg_find_vsi(pf, vsi_seid);
> -		if (!vsi) {
> -			dev_info(&pf->pdev->dev,
> -				 "add relay: VSI %d not found\n", vsi_seid);
> -			goto command_write_done;
> -		}
> -
>  		veb = i40e_veb_get_by_seid(pf, uplink_seid);
>  		if (!veb && uplink_seid != 0 && uplink_seid != pf->mac_seid) {
>  			dev_info(&pf->pdev->dev,
>  				 "add relay: relay uplink %d not found\n",
>  				 uplink_seid);
>  			goto command_write_done;
> +		} else if (uplink_seid) {
> +			vsi = i40e_vsi_get_by_seid(pf, vsi_seid);
> +			if (!vsi) {
> +				dev_info(&pf->pdev->dev,
> +					 "add relay: VSI %d not found\n",
> +					 vsi_seid);
> +				goto command_write_done;
> +			}
> +			enabled_tc = vsi->tc_config.enabled_tc;
> +		} else if (vsi_seid) {
> +			dev_info(&pf->pdev->dev,
> +				 "add relay: VSI must be 0 for floating relay\n");
> +			goto command_write_done;
>  		}
>  
> -		veb = i40e_veb_setup(pf, 0, uplink_seid, vsi_seid,
> -				     vsi->tc_config.enabled_tc);
> +		veb = i40e_veb_setup(pf, 0, uplink_seid, vsi_seid, enabled_tc);
>  		if (veb)
>  			dev_info(&pf->pdev->dev, "added relay %d\n", veb->seid);
>  		else
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
> index e7be145f298a..6ae1206e1c1c 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_main.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
> @@ -10379,41 +10379,48 @@ static int i40e_reconstitute_veb(struct i40e_veb *veb)
>  	struct i40e_vsi *vsi;
>  	int v, ret;
>  
> -	/* build VSI that owns this VEB, temporarily attached to base VEB */
> -	i40e_pf_for_each_vsi(pf, v, vsi)
> -		if (vsi->veb_idx == veb->idx &&
> -		    vsi->flags & I40E_VSI_FLAG_VEB_OWNER) {
> -			ctl_vsi = vsi;
> -			break;
> +	if (veb->uplink_seid) {
> +		/* Look for VSI that owns this VEB, temporarily attached to base VEB */
> +		i40e_pf_for_each_vsi(pf, v, vsi)
> +			if (vsi->veb_idx == veb->idx &&
> +			    vsi->flags & I40E_VSI_FLAG_VEB_OWNER) {
> +				ctl_vsi = vsi;
> +				break;
> +			}
> +
> +		if (!ctl_vsi) {
> +			dev_info(&pf->pdev->dev,
> +				 "missing owner VSI for veb_idx %d\n",
> +				 veb->idx);
> +			ret = -ENOENT;
> +			goto end_reconstitute;
>  		}
> +		if (ctl_vsi != pf->vsi[pf->lan_vsi])
> +			ctl_vsi->uplink_seid =
> +				pf->vsi[pf->lan_vsi]->uplink_seid;
>  
> -	if (!ctl_vsi) {
> -		dev_info(&pf->pdev->dev,
> -			 "missing owner VSI for veb_idx %d\n", veb->idx);
> -		ret = -ENOENT;
> -		goto end_reconstitute;
> -	}
> -	if (ctl_vsi != pf->vsi[pf->lan_vsi])
> -		ctl_vsi->uplink_seid = pf->vsi[pf->lan_vsi]->uplink_seid;
> -	ret = i40e_add_vsi(ctl_vsi);
> -	if (ret) {
> -		dev_info(&pf->pdev->dev,
> -			 "rebuild of veb_idx %d owner VSI failed: %d\n",
> -			 veb->idx, ret);
> -		goto end_reconstitute;
> +		ret = i40e_add_vsi(ctl_vsi);
> +		if (ret) {
> +			dev_info(&pf->pdev->dev,
> +				 "rebuild of veb_idx %d owner VSI failed: %d\n",
> +				 veb->idx, ret);
> +			goto end_reconstitute;
> +		}
> +		i40e_vsi_reset_stats(ctl_vsi);
>  	}
> -	i40e_vsi_reset_stats(ctl_vsi);
>  
>  	/* create the VEB in the switch and move the VSI onto the VEB */
>  	ret = i40e_add_veb(veb, ctl_vsi);
>  	if (ret)
>  		goto end_reconstitute;
>  
> -	if (test_bit(I40E_FLAG_VEB_MODE_ENA, pf->flags))
> -		veb->bridge_mode = BRIDGE_MODE_VEB;
> -	else
> -		veb->bridge_mode = BRIDGE_MODE_VEPA;
> -	i40e_config_bridge_mode(veb);
> +	if (veb->uplink_seid) {
> +		if (test_bit(I40E_FLAG_VEB_MODE_ENA, pf->flags))
> +			veb->bridge_mode = BRIDGE_MODE_VEB;
> +		else
> +			veb->bridge_mode = BRIDGE_MODE_VEPA;
> +		i40e_config_bridge_mode(veb);
> +	}
>  
>  	/* create the remaining VSIs attached to this VEB */
>  	i40e_pf_for_each_vsi(pf, v, vsi) {
> @@ -14716,29 +14723,29 @@ void i40e_veb_release(struct i40e_veb *veb)
>  	/* find the remaining VSI and check for extras */
>  	i40e_pf_for_each_vsi(pf, i, vsi_it)
>  		if (vsi_it->uplink_seid == veb->seid) {
> -			vsi = vsi_it;
> +			if (vsi_it->flags & I40E_VSI_FLAG_VEB_OWNER)
> +				vsi = vsi_it;
>  			n++;
>  		}
>  
> -	if (n != 1) {
> +	/* Floating VEB has to be empty and regular one must have
> +	 * single owner VSI.
> +	 */
> +	if ((veb->uplink_seid && n != 1) || (!veb->uplink_seid && n != 0)) {
>  		dev_info(&pf->pdev->dev,
>  			 "can't remove VEB %d with %d VSIs left\n",
>  			 veb->seid, n);
>  		return;
>  	}
>  
> -	/* move the remaining VSI to uplink veb */
> -	vsi->flags &= ~I40E_VSI_FLAG_VEB_OWNER;
> +	/* For regular VEB move the owner VSI to uplink VEB */
>  	if (veb->uplink_seid) {
> +		vsi->flags &= ~I40E_VSI_FLAG_VEB_OWNER;
>  		vsi->uplink_seid = veb->uplink_seid;
>  		if (veb->uplink_seid == pf->mac_seid)
>  			vsi->veb_idx = I40E_NO_VEB;
>  		else
>  			vsi->veb_idx = veb->veb_idx;
> -	} else {
> -		/* floating VEB */
> -		vsi->uplink_seid = pf->vsi[pf->lan_vsi]->uplink_seid;
> -		vsi->veb_idx = pf->vsi[pf->lan_vsi]->veb_idx;
>  	}
>  
>  	i40e_aq_delete_element(&pf->hw, veb->seid, NULL);
> @@ -14756,8 +14763,8 @@ static int i40e_add_veb(struct i40e_veb *veb, struct i40e_vsi *vsi)
>  	bool enable_stats = !!test_bit(I40E_FLAG_VEB_STATS_ENA, pf->flags);
>  	int ret;
>  
> -	ret = i40e_aq_add_veb(&pf->hw, veb->uplink_seid, vsi->seid,
> -			      veb->enabled_tc, false,
> +	ret = i40e_aq_add_veb(&pf->hw, veb->uplink_seid, vsi ? vsi->seid : 0,
> +			      veb->enabled_tc, vsi ? false : true,
>  			      &veb->seid, enable_stats, NULL);
>  
>  	/* get a VEB from the hardware */
> @@ -14789,9 +14796,11 @@ static int i40e_add_veb(struct i40e_veb *veb, struct i40e_vsi *vsi)
>  		return -ENOENT;
>  	}
>  
> -	vsi->uplink_seid = veb->seid;
> -	vsi->veb_idx = veb->idx;
> -	vsi->flags |= I40E_VSI_FLAG_VEB_OWNER;
> +	if (vsi) {
> +		vsi->uplink_seid = veb->seid;
> +		vsi->veb_idx = veb->idx;
> +		vsi->flags |= I40E_VSI_FLAG_VEB_OWNER;
> +	}
>  
>  	return 0;
>  }
> @@ -14817,7 +14826,7 @@ struct i40e_veb *i40e_veb_setup(struct i40e_pf *pf, u16 flags,
>  				u8 enabled_tc)
>  {
>  	struct i40e_veb *veb, *uplink_veb = NULL;
> -	struct i40e_vsi *vsi;
> +	struct i40e_vsi *vsi = NULL;
>  	int veb_idx;
>  	int ret;
>  

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ