linux-kernel - Re: [PATCH v2 5/6] drm/msm/dsi: support DSC configurations with slice_per

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAA8EJpr7Qx356OM7W+3iumwgBqXyjM3_zuKnEGqM85JZ+BsE6A@mail.gmail.com>
Date:   Wed, 15 Nov 2023 09:49:53 +0200
From:   Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To:     Jonathan Marek <jonathan@...ek.ca>
Cc:     freedreno@...ts.freedesktop.org, Rob Clark <robdclark@...il.com>,
        Abhinav Kumar <quic_abhinavk@...cinc.com>,
        Sean Paul <sean@...rly.run>,
        Marijn Suijten <marijn.suijten@...ainline.org>,
        David Airlie <airlied@...il.com>,
        Daniel Vetter <daniel@...ll.ch>,
        Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
        Maxime Ripard <mripard@...nel.org>,
        Thomas Zimmermann <tzimmermann@...e.de>,
        Jessica Zhang <quic_jesszhan@...cinc.com>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Jiasheng Jiang <jiasheng@...as.ac.cn>,
        "open list:DRM DRIVER FOR MSM ADRENO GPU" 
        <linux-arm-msm@...r.kernel.org>,
        "open list:DRM DRIVER FOR MSM ADRENO GPU" 
        <dri-devel@...ts.freedesktop.org>,
        open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 5/6] drm/msm/dsi: support DSC configurations with
 slice_per_pkt > 1

On Wed, 15 Nov 2023 at 01:00, Jonathan Marek <jonathan@...ek.ca> wrote:
>
> Add a dsc_slice_per_pkt field to mipi_dsi_device struct and the necessary
> changes to msm driver to support this field.
>
> Note that the removed "pkt_per_line = slice_per_intf * slice_per_pkt"
> comment is incorrect.
>
> Signed-off-by: Jonathan Marek <jonathan@...ek.ca>
> ---
>  drivers/gpu/drm/msm/dsi/dsi_host.c | 25 ++++++++++---------------
>  include/drm/drm_mipi_dsi.h         |  1 +
>  2 files changed, 11 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 842765063b1b..892a463a7e03 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -161,6 +161,7 @@ struct msm_dsi_host {
>
>         struct drm_display_mode *mode;
>         struct drm_dsc_config *dsc;
> +       unsigned int dsc_slice_per_pkt;
>
>         /* connected device info */
>         unsigned int channel;
> @@ -857,17 +858,10 @@ static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
>         slice_per_intf = msm_dsc_get_slices_per_intf(dsc, hdisplay);
>
>         total_bytes_per_intf = dsc->slice_chunk_size * slice_per_intf;
> -       bytes_per_pkt = dsc->slice_chunk_size; /* * slice_per_pkt; */
> +       bytes_per_pkt = dsc->slice_chunk_size * msm_host->dsc_slice_per_pkt;
>
>         eol_byte_num = total_bytes_per_intf % 3;
> -
> -       /*
> -        * Typically, pkt_per_line = slice_per_intf * slice_per_pkt.
> -        *
> -        * Since the current driver only supports slice_per_pkt = 1,
> -        * pkt_per_line will be equal to slice per intf for now.
> -        */
> -       pkt_per_line = slice_per_intf;
> +       pkt_per_line = slice_per_intf / msm_host->dsc_slice_per_pkt;
>
>         if (is_cmd_mode) /* packet data type */
>                 reg = DSI_COMMAND_COMPRESSION_MODE_CTRL_STREAM0_DATATYPE(MIPI_DSI_DCS_LONG_WRITE);
> @@ -1004,12 +998,8 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
>                 else
>                         /*
>                          * When DSC is enabled, WC = slice_chunk_size * slice_per_pkt + 1.
> -                        * Currently, the driver only supports default value of slice_per_pkt = 1
> -                        *
> -                        * TODO: Expand mipi_dsi_device struct to hold slice_per_pkt info
> -                        *       and adjust DSC math to account for slice_per_pkt.
>                          */
> -                       wc = msm_host->dsc->slice_chunk_size + 1;
> +                       wc = msm_host->dsc->slice_chunk_size * msm_host->dsc_slice_per_pkt + 1;
>
>                 dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_CTRL,
>                         DSI_CMD_MDP_STREAM0_CTRL_WORD_COUNT(wc) |
> @@ -1636,8 +1626,13 @@ static int dsi_host_attach(struct mipi_dsi_host *host,
>         msm_host->lanes = dsi->lanes;
>         msm_host->format = dsi->format;
>         msm_host->mode_flags = dsi->mode_flags;
> -       if (dsi->dsc)
> +       if (dsi->dsc) {
>                 msm_host->dsc = dsi->dsc;
> +               msm_host->dsc_slice_per_pkt = dsi->dsc_slice_per_pkt;
> +               /* for backwards compatibility, assume 1 if not set */
> +               if (!msm_host->dsc_slice_per_pkt)
> +                       msm_host->dsc_slice_per_pkt = 1;
> +       }
>
>         /* Some gpios defined in panel DT need to be controlled by host */
>         ret = dsi_host_init_panel_gpios(msm_host, &dsi->dev);
> diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h
> index c9df0407980c..3e32fa52d94b 100644
> --- a/include/drm/drm_mipi_dsi.h
> +++ b/include/drm/drm_mipi_dsi.h
> @@ -193,6 +193,7 @@ struct mipi_dsi_device {
>         unsigned long hs_rate;
>         unsigned long lp_rate;
>         struct drm_dsc_config *dsc;
> +       unsigned int dsc_slice_per_pkt;

Missing documentation. Also maybe this chunk should go into a separate
patch so that it can gain more attention from DRM maintainers?

>  };
>
>  #define MIPI_DSI_MODULE_PREFIX "mipi-dsi:"
> --
> 2.26.1
>


-- 
With best wishes
Dmitry