| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231115125810.1394854-3-anshulusr@gmail.com>
Date: Wed, 15 Nov 2023 18:28:08 +0530
From: Anshul Dalal <anshulusr@...il.com>
To: linux-kernel@...r.kernel.org, linux-iio@...r.kernel.org,
devicetree@...r.kernel.org
Cc: Anshul Dalal <anshulusr@...il.com>,
Conor Dooley <conor+dt@...nel.org>,
Lars-Peter Clausen <lars@...afoo.de>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-kernel-mentees@...ts.linuxfoundation.org,
Jonathan Cameron <jic23@...nel.org>
Subject: [PATCH v2 3/3] iio: chemical: add support for Aosong AGS02MA
A simple driver for the TVOC (Total Volatile Organic Compounds)
sensor from Aosong: AGS02MA
Steps in reading the VOC sensor value over i2c:
1. Read 5 bytes from the register `AGS02MA_TVOC_READ_REG` [0x00]
2. The first 4 bytes are taken as the big endian sensor data with final
byte being the CRC
3. The CRC is verified and the value is returned over an
`IIO_CHAN_INFO_RAW` channel as percents
Tested on Raspberry Pi Zero 2W
Datasheet:
https://asairsensors.com/wp-content/uploads/2021/09/AGS02MA.pdf
Product-Page:
http://www.aosong.com/m/en/products-33.html
Signed-off-by: Anshul Dalal <anshulusr@...il.com>
---
Changes for v2:
- Fixed Kconfig not selecting CRC8 (used to be `select crc8`)
- Changed instances of asair to aosong
- Report raw readings in percents instead of ppb
- Added myself as maintainer for the device binding
---
MAINTAINERS | 7 ++
drivers/iio/chemical/Kconfig | 11 +++
drivers/iio/chemical/Makefile | 1 +
drivers/iio/chemical/ags02ma.c | 161 +++++++++++++++++++++++++++++++++
4 files changed, 180 insertions(+)
create mode 100644 drivers/iio/chemical/ags02ma.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 81d5fc0bba68..07b82e766dbd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3028,6 +3028,13 @@ S: Supported
W: http://www.akm.com/
F: drivers/iio/magnetometer/ak8974.c
+AOSONG AGS02MA TVOC SENSOR DRIVER
+M: Anshul Dalal <anshulusr@...il.com>
+L: linux-iio@...r.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/iio/chemical/aosong,ags02ma.yaml
+F: drivers/iio/chemical/ags02ma.c
+
ASC7621 HARDWARE MONITOR DRIVER
M: George Joseph <george.joseph@...rview5.com>
L: linux-hwmon@...r.kernel.org
diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig
index c30657e10ee1..02649ab81b3c 100644
--- a/drivers/iio/chemical/Kconfig
+++ b/drivers/iio/chemical/Kconfig
@@ -5,6 +5,17 @@
menu "Chemical Sensors"
+config AOSONG_AGS02MA
+ tristate "Aosong AGS02MA TVOC sensor driver"
+ depends on I2C
+ select CRC8
+ help
+ Say Y here to build support for Aosong AGS02MA TVOC (Total Volatile
+ Organic Compounds) sensor.
+
+ To compile this driver as module, choose M here: the module will be
+ called ags02ma.
+
config ATLAS_PH_SENSOR
tristate "Atlas Scientific OEM SM sensors"
depends on I2C
diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile
index a11e777a7a00..2f3dee8bb779 100644
--- a/drivers/iio/chemical/Makefile
+++ b/drivers/iio/chemical/Makefile
@@ -4,6 +4,7 @@
#
# When adding new entries keep the list in alphabetical order
+obj-$(CONFIG_AOSONG_AGS02MA) += ags02ma.o
obj-$(CONFIG_ATLAS_PH_SENSOR) += atlas-sensor.o
obj-$(CONFIG_ATLAS_EZO_SENSOR) += atlas-ezo-sensor.o
obj-$(CONFIG_BME680) += bme680_core.o
diff --git a/drivers/iio/chemical/ags02ma.c b/drivers/iio/chemical/ags02ma.c
new file mode 100644
index 000000000000..e23655ffce69
--- /dev/null
+++ b/drivers/iio/chemical/ags02ma.c
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2023 Anshul Dalal <anshulusr@...il.com>
+ *
+ * Driver for Aosong AGS02MA
+ *
+ * Datasheet:
+ * https://asairsensors.com/wp-content/uploads/2021/09/AGS02MA.pdf
+ * Product Page:
+ * http://www.aosong.com/m/en/products-33.html
+ *
+ * TODO:
+ * - Add support for ug/m^3 units of measurement
+ * - Add support for modifying i2c address
+ */
+
+#include <linux/crc8.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+
+#define AGS02MA_DEVICE_NAME "ags02ma"
+
+#define AGS02MA_TVOC_READ_REG 0x00
+#define AGS02MA_VERSION_REG 0x11
+
+#define AGS02MA_VERSION_PROCESSING_DELAY 30
+#define AGS02MA_TVOC_READ_PROCESSING_DELAY 1500
+
+#define AGS02MA_CRC8_INIT 0xff
+#define AGS02MA_CRC8_POLYNOMIAL 0x31
+#define AGS02MA_PPB_PERCENT_CONVERSION 10000000
+
+DECLARE_CRC8_TABLE(ags02ma_crc8_table);
+
+struct ags02ma_data {
+ struct i2c_client *client;
+};
+
+struct ags02ma_reading {
+ __be32 data;
+ u8 crc;
+} __packed;
+
+static u32 ags02ma_register_read(struct i2c_client *client, u8 reg, u16 delay)
+{
+ u32 ret;
+ u8 crc;
+ struct ags02ma_reading read_buffer;
+
+ ret = i2c_master_send(client, ®, sizeof(reg));
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "Failed to send data to register 0x%x: %d", reg, ret);
+ return ret;
+ }
+
+ /* Processing Delay, Check Table 7.7 in the datasheet */
+ msleep_interruptible(delay);
+
+ ret = i2c_master_recv(client, (u8 *)&read_buffer, sizeof(read_buffer));
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "Failed to receive from register 0x%x: %d", reg, ret);
+ return ret;
+ }
+ ret = be32_to_cpu(read_buffer.data);
+
+ crc = crc8(ags02ma_crc8_table, (u8 *)&read_buffer.data,
+ sizeof(read_buffer.data), AGS02MA_CRC8_INIT);
+ if (crc != read_buffer.crc) {
+ dev_err(&client->dev, "CRC error\n");
+ return -EIO;
+ }
+
+ return ret;
+}
+
+static int ags02ma_read_raw(struct iio_dev *iio_device,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ int ret;
+ struct ags02ma_data *data = iio_priv(iio_device);
+
+ if (mask == IIO_CHAN_INFO_RAW) {
+ /* The sensor reads data as ppb */
+ ret = ags02ma_register_read(data->client, AGS02MA_TVOC_READ_REG,
+ AGS02MA_TVOC_READ_PROCESSING_DELAY);
+ if (ret < 0)
+ return ret;
+ *val = ret;
+ *val2 = AGS02MA_PPB_PERCENT_CONVERSION;
+ return IIO_VAL_FRACTIONAL;
+ } else {
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info ags02ma_info = {
+ .read_raw = ags02ma_read_raw,
+};
+
+static const struct iio_chan_spec ags02ma_channels[] = {
+ { .type = IIO_CONCENTRATION,
+ .channel2 = IIO_MOD_VOC,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) }
+};
+
+static int ags02ma_probe(struct i2c_client *client)
+{
+ int ret;
+ struct ags02ma_data *data;
+ struct iio_dev *indio_dev;
+ u32 version;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ crc8_populate_msb(ags02ma_crc8_table, AGS02MA_CRC8_POLYNOMIAL);
+
+ ret = ags02ma_register_read(client, AGS02MA_VERSION_REG,
+ AGS02MA_VERSION_PROCESSING_DELAY);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read device version: %d", ret);
+ return ret;
+ }
+ version = ret;
+ dev_dbg(&client->dev, "Aosong AGS02MA, Version: 0x%x", version);
+
+ data = iio_priv(indio_dev);
+ i2c_set_clientdata(client, indio_dev);
+ data->client = client;
+ indio_dev->info = &ags02ma_info;
+ indio_dev->channels = ags02ma_channels;
+ indio_dev->num_channels = ARRAY_SIZE(ags02ma_channels);
+ indio_dev->name = AGS02MA_DEVICE_NAME;
+
+ return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct i2c_device_id ags02ma_id_table[] = {
+ { AGS02MA_DEVICE_NAME, 0 },
+ { /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, ags02ma_id_table);
+
+static struct i2c_driver ags02ma_driver = {
+ .driver = {
+ .name = AGS02MA_DEVICE_NAME,
+ },
+ .id_table = ags02ma_id_table,
+ .probe = ags02ma_probe,
+};
+module_i2c_driver(ags02ma_driver);
+
+MODULE_AUTHOR("Anshul Dalal <anshulusr@...il.com>");
+MODULE_DESCRIPTION("Aosong AGS02MA TVOC Driver");
+MODULE_LICENSE("GPL");
--
2.42.0
Powered by blists - more mailing lists