| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20231115142749.853106-9-claudiu.beznea.uj@bp.renesas.com>
Date: Wed, 15 Nov 2023 16:27:48 +0200
From: Claudiu <claudiu.beznea@...on.dev>
To: tglx@...utronix.de, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
geert+renesas@...der.be, magnus.damm@...il.com,
mturquette@...libre.com, sboyd@...nel.org,
prabhakar.mahadev-lad.rj@...renesas.com
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-renesas-soc@...r.kernel.org, linux-clk@...r.kernel.org,
Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Subject: [PATCH v2 8/9] irqchip/renesas-rzg2l: Add support for suspend to RAM
From: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
irqchip-renesas-rzg2l driver is used on RZ/G3S SoC. RZ/G3S could go to deep
sleep states where power to different SoC's parts are cut off and RAM is
switched to self-refresh. The resume from these states is done with the
help of bootloader.
IA55 IRQ controller needs to be reconfigured when resuming from deep sleep
state. For this the IA55 registers are cached in suspend and restored in
resume.
The IA55 IRQ controller is connected to GPIO controller and GIC as follows:
┌──────────┐ ┌──────────┐
│ │ SPIX │ │
│ ├─────────►│ │
│ │ │ │
│ │ │ │
┌────────┐IRQ0-7 │ IA55 │ │ GIC │
Pin0 ───────►│ ├─────────────►│ │ │ │
│ │ │ │ PPIY │ │
... │ GPIO │ │ ├─────────►│ │
│ │GPIOINT0-127 │ │ │ │
PinN ───────►│ ├─────────────►│ │ │ │
└────────┘ └──────────┘ └──────────┘
where:
- Pin0 is the first GPIO controller pin
- PinN is the last GPIO controller pin
- SPIX is the SPI interrupt with identifier X
- PPIY is the PPI interrupt with identifier Y
Suspend/resume functionality was implemented with syscore_ops to be able
to cache/restore the registers after/before GPIO controller suspend/resume
was called. As suspend/resume function members of syscore_ops doesn't take
any argument, to be able to access the cache data structure and
controller's base address from within suspend/resume functions, the driver
private data structure was declared as static in file, named
rzg2l_irqc_data and driver has been adjusted accordingly for this.
Because IA55 IRQC is resumed before GPIO controller and different GPIO
pins could be in unwanted state for IA55 IRQC (e.g. HiZ) when IA55
reconfiguration is done on resume path, to avoid spurious interrupts
the IA55 resume configures only interrupt type on resume. The interrupt
enable operation will be done at the end of GPIO controller resume.
The interrupt type reconfiguration was kept in IA55 driver to minimize
the number of subsystems interactions on suspend/resume b/w GPIO and
IA55 drivers (as the IRQ reconfiguration from GPIO driver is done with
IRQ specific APIs).
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
---
Changes in v2:
- improved commit description
- use uppercase letter after ":" in patch title
- implemented review comments: used tabs to align initialized structures
members, use proper naming for driver's private data structure
- use local variable for controller's base address in suspend/resume
functions
drivers/irqchip/irq-renesas-rzg2l.c | 68 +++++++++++++++++++++++------
1 file changed, 55 insertions(+), 13 deletions(-)
diff --git a/drivers/irqchip/irq-renesas-rzg2l.c b/drivers/irqchip/irq-renesas-rzg2l.c
index 45b696db220f..bd0dd9fcd68a 100644
--- a/drivers/irqchip/irq-renesas-rzg2l.c
+++ b/drivers/irqchip/irq-renesas-rzg2l.c
@@ -18,6 +18,7 @@
#include <linux/pm_runtime.h>
#include <linux/reset.h>
#include <linux/spinlock.h>
+#include <linux/syscore_ops.h>
#define IRQC_IRQ_START 1
#define IRQC_IRQ_COUNT 8
@@ -55,17 +56,29 @@
#define TINT_EXTRACT_HWIRQ(x) FIELD_GET(GENMASK(15, 0), (x))
#define TINT_EXTRACT_GPIOINT(x) FIELD_GET(GENMASK(31, 16), (x))
+/**
+ * struct rzg2l_irqc_reg_cache - registers cache (necessary for suspend/resume)
+ * @iitsr: IITSR register
+ * @titsr: TITSR registers
+ */
+struct rzg2l_irqc_reg_cache {
+ u32 iitsr;
+ u32 titsr[2];
+};
+
/**
* struct rzg2l_irqc_priv - IRQ controller private data structure
* @base: controller's base address
* @fwspec: IRQ firmware specific data
* @lock: lock to protect concurrent access to hardware registers
+ * @cache: registers cache (necessary for suspend/resume)
*/
-struct rzg2l_irqc_priv {
+static struct rzg2l_irqc_priv {
void __iomem *base;
struct irq_fwspec fwspec[IRQC_NUM_IRQ];
raw_spinlock_t lock;
-};
+ struct rzg2l_irqc_reg_cache cache;
+} rzg2l_irqc_data;
static struct rzg2l_irqc_priv *irq_data_to_priv(struct irq_data *data)
{
@@ -246,6 +259,38 @@ static int rzg2l_irqc_set_type(struct irq_data *d, unsigned int type)
return irq_chip_set_type_parent(d, IRQ_TYPE_LEVEL_HIGH);
}
+static int rzg2l_irqc_irq_suspend(void)
+{
+ struct rzg2l_irqc_reg_cache *cache = &rzg2l_irqc_data.cache;
+ void __iomem *base = rzg2l_irqc_data.base;
+
+ cache->iitsr = readl_relaxed(base + IITSR);
+ for (u8 i = 0; i < 2; i++)
+ cache->titsr[i] = readl_relaxed(base + TITSR(i));
+
+ return 0;
+}
+
+static void rzg2l_irqc_irq_resume(void)
+{
+ struct rzg2l_irqc_reg_cache *cache = &rzg2l_irqc_data.cache;
+ void __iomem *base = rzg2l_irqc_data.base;
+
+ /*
+ * Restore only interrupt type. TSSRx will be restored at the
+ * request of pin controller to avoid spurious interrupts due
+ * to invalid PIN states.
+ */
+ for (u8 i = 0; i < 2; i++)
+ writel_relaxed(cache->titsr[i], base + TITSR(i));
+ writel_relaxed(cache->iitsr, base + IITSR);
+}
+
+static struct syscore_ops rzg2l_irqc_syscore_ops = {
+ .suspend = rzg2l_irqc_irq_suspend,
+ .resume = rzg2l_irqc_irq_resume,
+};
+
static const struct irq_chip irqc_chip = {
.name = "rzg2l-irqc",
.irq_eoi = rzg2l_irqc_eoi,
@@ -331,7 +376,6 @@ static int rzg2l_irqc_init(struct device_node *node, struct device_node *parent)
struct irq_domain *irq_domain, *parent_domain;
struct platform_device *pdev;
struct reset_control *resetn;
- struct rzg2l_irqc_priv *priv;
int ret;
pdev = of_find_device_by_node(node);
@@ -344,15 +388,11 @@ static int rzg2l_irqc_init(struct device_node *node, struct device_node *parent)
return -ENODEV;
}
- priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
+ rzg2l_irqc_data.base = devm_of_iomap(&pdev->dev, pdev->dev.of_node, 0, NULL);
+ if (IS_ERR(rzg2l_irqc_data.base))
+ return PTR_ERR(rzg2l_irqc_data.base);
- priv->base = devm_of_iomap(&pdev->dev, pdev->dev.of_node, 0, NULL);
- if (IS_ERR(priv->base))
- return PTR_ERR(priv->base);
-
- ret = rzg2l_irqc_parse_interrupts(priv, node);
+ ret = rzg2l_irqc_parse_interrupts(&rzg2l_irqc_data, node);
if (ret) {
dev_err(&pdev->dev, "cannot parse interrupts: %d\n", ret);
return ret;
@@ -375,17 +415,19 @@ static int rzg2l_irqc_init(struct device_node *node, struct device_node *parent)
goto pm_disable;
}
- raw_spin_lock_init(&priv->lock);
+ raw_spin_lock_init(&rzg2l_irqc_data.lock);
irq_domain = irq_domain_add_hierarchy(parent_domain, 0, IRQC_NUM_IRQ,
node, &rzg2l_irqc_domain_ops,
- priv);
+ &rzg2l_irqc_data);
if (!irq_domain) {
dev_err(&pdev->dev, "failed to add irq domain\n");
ret = -ENOMEM;
goto pm_put;
}
+ register_syscore_ops(&rzg2l_irqc_syscore_ops);
+
return 0;
pm_put:
--
2.39.2
Powered by blists - more mailing lists