[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231115032515.4249-2-quic_luoj@quicinc.com>
Date: Wed, 15 Nov 2023 11:25:07 +0800
From: Luo Jie <quic_luoj@...cinc.com>
To: <agross@...nel.org>, <andersson@...nel.org>,
<konrad.dybcio@...aro.org>, <davem@...emloft.net>,
<edumazet@...gle.com>, <kuba@...nel.org>, <pabeni@...hat.com>,
<robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
<conor+dt@...nel.org>, <andrew@...n.ch>, <hkallweit1@...il.com>,
<linux@...linux.org.uk>, <robert.marko@...tura.hr>
CC: <linux-arm-msm@...r.kernel.org>, <netdev@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<quic_srichara@...cinc.com>
Subject: [PATCH 1/9] net: mdio: ipq4019: increase eth_ldo_rdy for ipq5332 platform
There are two PCS(UNIPHY) supported in SOC side on ipq5332,
and three PCS(UNIPHY) supported on ipq9574.
Signed-off-by: Luo Jie <quic_luoj@...cinc.com>
---
drivers/net/mdio/mdio-ipq4019.c | 55 +++++++++++++++++++--------------
1 file changed, 32 insertions(+), 23 deletions(-)
diff --git a/drivers/net/mdio/mdio-ipq4019.c b/drivers/net/mdio/mdio-ipq4019.c
index abd8b508ec16..9d444f5f7efb 100644
--- a/drivers/net/mdio/mdio-ipq4019.c
+++ b/drivers/net/mdio/mdio-ipq4019.c
@@ -18,28 +18,31 @@
#define MDIO_DATA_WRITE_REG 0x48
#define MDIO_DATA_READ_REG 0x4c
#define MDIO_CMD_REG 0x50
-#define MDIO_CMD_ACCESS_BUSY BIT(16)
-#define MDIO_CMD_ACCESS_START BIT(8)
-#define MDIO_CMD_ACCESS_CODE_READ 0
-#define MDIO_CMD_ACCESS_CODE_WRITE 1
-#define MDIO_CMD_ACCESS_CODE_C45_ADDR 0
-#define MDIO_CMD_ACCESS_CODE_C45_WRITE 1
-#define MDIO_CMD_ACCESS_CODE_C45_READ 2
+#define MDIO_CMD_ACCESS_BUSY BIT(16)
+#define MDIO_CMD_ACCESS_START BIT(8)
+#define MDIO_CMD_ACCESS_CODE_READ 0
+#define MDIO_CMD_ACCESS_CODE_WRITE 1
+#define MDIO_CMD_ACCESS_CODE_C45_ADDR 0
+#define MDIO_CMD_ACCESS_CODE_C45_WRITE 1
+#define MDIO_CMD_ACCESS_CODE_C45_READ 2
/* 0 = Clause 22, 1 = Clause 45 */
#define MDIO_MODE_C45 BIT(8)
-#define IPQ4019_MDIO_TIMEOUT 10000
-#define IPQ4019_MDIO_SLEEP 10
+#define IPQ4019_MDIO_TIMEOUT 10000
+#define IPQ4019_MDIO_SLEEP 10
/* MDIO clock source frequency is fixed to 100M */
-#define IPQ_MDIO_CLK_RATE 100000000
+#define IPQ_MDIO_CLK_RATE 100000000
-#define IPQ_PHY_SET_DELAY_US 100000
+#define IPQ_PHY_SET_DELAY_US 100000
+
+/* Maximum SOC PCS(uniphy) number on IPQ platform */
+#define ETH_LDO_RDY_CNT 3
struct ipq4019_mdio_data {
- void __iomem *membase;
- void __iomem *eth_ldo_rdy;
+ void __iomem *membase;
+ void __iomem *eth_ldo_rdy[ETH_LDO_RDY_CNT];
struct clk *mdio_clk;
};
@@ -210,13 +213,15 @@ static int ipq_mdio_reset(struct mii_bus *bus)
int ret;
/* To indicate CMN_PLL that ethernet_ldo has been ready if platform resource 1
- * is specified in the device tree.
+ * or more resource are specified in the device tree.
*/
- if (priv->eth_ldo_rdy) {
- val = readl(priv->eth_ldo_rdy);
- val |= BIT(0);
- writel(val, priv->eth_ldo_rdy);
- fsleep(IPQ_PHY_SET_DELAY_US);
+ for (ret = 0; ret < ETH_LDO_RDY_CNT; ret++) {
+ if (priv->eth_ldo_rdy[ret]) {
+ val = readl(priv->eth_ldo_rdy[ret]);
+ val |= BIT(0);
+ writel(val, priv->eth_ldo_rdy[ret]);
+ fsleep(IPQ_PHY_SET_DELAY_US);
+ }
}
/* Configure MDIO clock source frequency if clock is specified in the device tree */
@@ -252,11 +257,14 @@ static int ipq4019_mdio_probe(struct platform_device *pdev)
if (IS_ERR(priv->mdio_clk))
return PTR_ERR(priv->mdio_clk);
- /* The platform resource is provided on the chipset IPQ5018 */
+ /* The platform resource is provided on the chipset IPQ5018/IPQ5332 */
/* This resource is optional */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (res)
- priv->eth_ldo_rdy = devm_ioremap_resource(&pdev->dev, res);
+ for (ret = 0; ret < ETH_LDO_RDY_CNT; ret++) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, ret + 1);
+ if (res)
+ priv->eth_ldo_rdy[ret] = devm_ioremap(&pdev->dev,
+ res->start, resource_size(res));
+ }
bus->name = "ipq4019_mdio";
bus->read = ipq4019_mdio_read_c22;
@@ -288,6 +296,7 @@ static void ipq4019_mdio_remove(struct platform_device *pdev)
static const struct of_device_id ipq4019_mdio_dt_ids[] = {
{ .compatible = "qcom,ipq4019-mdio" },
{ .compatible = "qcom,ipq5018-mdio" },
+ { .compatible = "qcom,ipq5332-mdio" },
{ }
};
MODULE_DEVICE_TABLE(of, ipq4019_mdio_dt_ids);
--
2.42.0
Powered by blists - more mailing lists