[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231115181103.GX74656@kernel.org>
Date: Wed, 15 Nov 2023 18:11:03 +0000
From: Simon Horman <horms@...nel.org>
To: Romain Gantois <romain.gantois@...tlin.com>
Cc: davem@...emloft.net, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Jakub Kicinski <kuba@...nel.org>,
Eric Dumazet <edumazet@...gle.com>,
Paolo Abeni <pabeni@...hat.com>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
thomas.petazzoni@...tlin.com, Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
linux-arm-kernel@...ts.infradead.org,
Vladimir Oltean <vladimir.oltean@....com>,
Luka Perkov <luka.perkov@...tura.hr>,
Robert Marko <robert.marko@...tura.hr>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>
Subject: Re: [PATCH net-next v3 3/8] net: qualcomm: ipqess: introduce the
Qualcomm IPQESS driver
On Tue, Nov 14, 2023 at 11:55:53AM +0100, Romain Gantois wrote:
> The Qualcomm IPQ4019 Ethernet Switch Subsystem for the IPQ4019 chip
> includes an internal Ethernet switch based on the QCA8K IP.
>
> The CPU-to-switch port data plane depends on the IPQESS EDMA Controller,
> a simple 1G Ethernet controller. It is connected to the switch through an
> internal link, and doesn't expose directly any external interface.
>
> The EDMA controller has 16 RX and TX queues, with a very basic RSS fanout
> configured at init time.
>
> Signed-off-by: Romain Gantois <romain.gantois@...tlin.com>
Hi Romain,
some minor feedback from my side.
> diff --git a/drivers/net/ethernet/qualcomm/ipqess/ipqess_switch.c b/drivers/net/ethernet/qualcomm/ipqess/ipqess_switch.c
...
> +static int ipqess_switch_probe(struct platform_device *pdev)
> +{
...
> + for_each_available_child_of_node(ports, port_np) {
> + ret = ipqess_port_register(sw, port_np);
> + if (ret) {
> + pr_err("Failed to register ipqess port! error %d\n", ret);
Coccinelle warns that a call to of_node_put() is needed here.
> + goto out_ports;
> + }
> + }
...
> +static int
> +ipqess_switch_remove(struct platform_device *pdev)
> +{
> + struct ipqess_switch *sw = platform_get_drvdata(pdev);
> + struct qca8k_priv *priv = sw->priv;
Here sw is dereferenced...
> + struct ipqess_port *port = NULL;
> + int i;
> +
> + if (!sw)
> + return 0;
... but here the code guards against sw being NULL.
This seems inconsistent.
As flagged by Smatch.
...
Powered by blists - more mailing lists