lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20231115190144.740291-1-daniel@zonque.org>
Date:   Wed, 15 Nov 2023 20:01:44 +0100
From:   Daniel Mack <daniel@...que.org>
To:     gregkh@...uxfoundation.org, jirislaby@...nel.org,
        lech.perczak@...lingroup.com, u.kleine-koenig@...gutronix.de
Cc:     linux-serial@...r.kernel.org, linux-kernel@...r.kernel.org,
        Daniel Mack <daniel@...que.org>,
        Maxim Popov <maxim.snafu@...il.com>, stable@...r.kernel.org
Subject: [PATCH v3] serial: sc16is7xx: address RX timeout interrupt errata

This device has a silicon bug that makes it report a timeout interrupt
but no data in the FIFO.

The datasheet states the following in the errata section 18.1.4:

  "If the host reads the receive FIFO at the same time as a
  time-out interrupt condition happens, the host might read 0xCC
  (time-out) in the Interrupt Indication Register (IIR), but bit 0
  of the Line Status Register (LSR) is not set (means there is no
  data in the receive FIFO)."

The errata doesn't explicitly mention that, but tests have shown
that the RXLVL register is equally affected.

This bug has hit us on production units and when it does, sc16is7xx_irq()
would spin forever because sc16is7xx_port_irq() keeps seeing an
interrupt in the IIR register that is not cleared because the driver
does not call into sc16is7xx_handle_rx() unless the RXLVL register
reports at least one byte in the FIFO.

Fix this by always reading one byte when this condition is detected
in order to clear the interrupt.

Signed-off-by: Daniel Mack <daniel@...que.org>
Co-Developed-by: Maxim Popov <maxim.snafu@...il.com>
Cc: stable@...r.kernel.org
---
v3: re-added the additional Co-Developed-by and stable@ tags
v2: reworded the commit log a bit for more context.

 drivers/tty/serial/sc16is7xx.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 289ca7d4e566..76f76e510ed1 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -765,6 +765,18 @@ static bool sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno)
 		case SC16IS7XX_IIR_RTOI_SRC:
 		case SC16IS7XX_IIR_XOFFI_SRC:
 			rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG);
+
+			/*
+			 * There is a silicon bug that makes the chip report a
+			 * time-out interrupt but no data in the FIFO. This is
+			 * described in errata section 18.1.4.
+			 *
+			 * When this happens, read one byte from the FIFO to
+			 * clear the interrupt.
+			 */
+			if (iir == SC16IS7XX_IIR_RTOI_SRC && !rxlen)
+				rxlen = 1;
+
 			if (rxlen)
 				sc16is7xx_handle_rx(port, rxlen, iir);
 			break;
-- 
2.41.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ