| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231116005643.245314-2-kimseer.paller@analog.com>
Date: Thu, 16 Nov 2023 08:56:43 +0800
From: Kim Seer Paller <kimseer.paller@...log.com>
To: unlisted-recipients:; (no To-header on input)
CC: Jonathan Cameron <jic23@...nel.org>,
Lars-Peter Clausen <lars@...afoo.de>,
Michael Hennerich <Michael.Hennerich@...log.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Kim Seer Paller <kimseer.paller@...log.com>,
<linux-iio@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH 2/2] iio: frequency: admfm2000: New driver
Dual microwave down converter module with input RF and LO frequency
ranges from 0.5 to 32 GHz and an output IF frequency range from 0.1 to
8 GHz. It consists of a LNA, mixer, IF filter, DSA, and IF amplifier
for each down conversion path.
Signed-off-by: Kim Seer Paller <kimseer.paller@...log.com>
---
MAINTAINERS | 1 +
drivers/iio/frequency/Kconfig | 10 +
drivers/iio/frequency/Makefile | 1 +
drivers/iio/frequency/admfm2000.c | 309 ++++++++++++++++++++++++++++++
4 files changed, 321 insertions(+)
create mode 100644 drivers/iio/frequency/admfm2000.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 505eb57eb..fbd9bce86 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1253,6 +1253,7 @@ L: linux-iio@...r.kernel.org
S: Supported
W: https://ez.analog.com/linux-software-drivers
F: Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml
+F: drivers/iio/frequency/admfm2000.c
ANALOG DEVICES INC ADMV1013 DRIVER
M: Antoniu Miclaus <antoniu.miclaus@...log.com>
diff --git a/drivers/iio/frequency/Kconfig b/drivers/iio/frequency/Kconfig
index 9e85dfa58..c455be7d4 100644
--- a/drivers/iio/frequency/Kconfig
+++ b/drivers/iio/frequency/Kconfig
@@ -60,6 +60,16 @@ config ADF4377
To compile this driver as a module, choose M here: the
module will be called adf4377.
+config ADMFM2000
+ tristate "Analog Devices ADMFM2000 Dual Microwave Down Converter"
+ depends on GPIOLIB
+ help
+ Say yes here to build support for Analog Devices ADMFM2000 Dual
+ Microwave Down Converter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called admfm2000.
+
config ADMV1013
tristate "Analog Devices ADMV1013 Microwave Upconverter"
depends on SPI && COMMON_CLK
diff --git a/drivers/iio/frequency/Makefile b/drivers/iio/frequency/Makefile
index b616c29b4..70d0e0b70 100644
--- a/drivers/iio/frequency/Makefile
+++ b/drivers/iio/frequency/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_AD9523) += ad9523.o
obj-$(CONFIG_ADF4350) += adf4350.o
obj-$(CONFIG_ADF4371) += adf4371.o
obj-$(CONFIG_ADF4377) += adf4377.o
+obj-$(CONFIG_ADMFM2000) += admfm2000.o
obj-$(CONFIG_ADMV1013) += admv1013.o
obj-$(CONFIG_ADMV1014) += admv1014.o
obj-$(CONFIG_ADMV4420) += admv4420.o
diff --git a/drivers/iio/frequency/admfm2000.c b/drivers/iio/frequency/admfm2000.c
new file mode 100644
index 000000000..e0b5edce7
--- /dev/null
+++ b/drivers/iio/frequency/admfm2000.c
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ADMFM2000 Dual Microwave Down Converter
+ *
+ * Copyright 2023 Analog Devices Inc.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/iio/iio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#define ADMFM2000_MIXER_MODE 0
+#define ADMFM2000_DIRECT_IF_MODE 1
+#define ADMF20000_DSA_GPIOS 5
+#define ADMF20000_MODE_GPIOS 2
+#define ADMF20000_MAX_GAIN 0
+#define ADMF20000_MIN_GAIN -31000
+#define ADMF20000_DEFAULT_GAIN -0x20
+
+struct admfm2000_state {
+ struct mutex lock; /* protect sensor state */
+ struct gpio_descs *sw_ch[2];
+ struct gpio_descs *dsa_gpios[2];
+ u32 gain[2];
+};
+
+static int admfm2000_mode(struct iio_dev *indio_dev, u32 reg, u32 mode)
+{
+ struct admfm2000_state *st = iio_priv(indio_dev);
+ DECLARE_BITMAP(values, 2);
+
+ switch (mode) {
+ case ADMFM2000_MIXER_MODE:
+ values[0] = (reg == 0) ? 1 : 2;
+ gpiod_set_array_value_cansleep(st->sw_ch[reg]->ndescs,
+ st->sw_ch[reg]->desc,
+ NULL, values);
+ break;
+ case ADMFM2000_DIRECT_IF_MODE:
+ values[0] = (reg == 0) ? 2 : 1;
+ gpiod_set_array_value_cansleep(st->sw_ch[reg]->ndescs,
+ st->sw_ch[reg]->desc,
+ NULL, values);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int admfm2000_attenuation(struct iio_dev *indio_dev, u32 chan,
+ u32 value)
+{
+ struct admfm2000_state *st = iio_priv(indio_dev);
+ DECLARE_BITMAP(values, BITS_PER_TYPE(value));
+
+ values[0] = value;
+
+ gpiod_set_array_value_cansleep(st->dsa_gpios[chan]->ndescs,
+ st->dsa_gpios[chan]->desc,
+ NULL, values);
+ return 0;
+}
+
+static int admfm2000_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ struct admfm2000_state *st = iio_priv(indio_dev);
+ int gain;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_HARDWAREGAIN:
+ mutex_lock(&st->lock);
+ gain = ~(st->gain[chan->channel]) * -1000;
+ *val = gain / 1000;
+ *val2 = (gain % 1000) * 1000;
+ mutex_unlock(&st->lock);
+
+ return IIO_VAL_INT_PLUS_MICRO_DB;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int admfm2000_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val,
+ int val2, long mask)
+{
+ struct admfm2000_state *st = iio_priv(indio_dev);
+ int gain, ret;
+
+ if (val < 0)
+ gain = (val * 1000) - (val2 / 1000);
+ else
+ gain = (val * 1000) + (val2 / 1000);
+
+ if (gain > ADMF20000_MAX_GAIN || gain < ADMF20000_MIN_GAIN)
+ return -EINVAL;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_HARDWAREGAIN:
+ mutex_lock(&st->lock);
+ st->gain[chan->channel] = ~((abs(gain) / 1000) & 0x1F);
+
+ ret = admfm2000_attenuation(indio_dev, chan->channel,
+ st->gain[chan->channel]);
+
+ mutex_unlock(&st->lock);
+ if (ret)
+ return ret;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int admfm2000_write_raw_get_fmt(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_HARDWAREGAIN:
+ return IIO_VAL_INT_PLUS_MICRO_DB;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info admfm2000_info = {
+ .read_raw = &admfm2000_read_raw,
+ .write_raw = &admfm2000_write_raw,
+ .write_raw_get_fmt = &admfm2000_write_raw_get_fmt,
+};
+
+#define ADMFM2000_CHAN(_channel) { \
+ .type = IIO_VOLTAGE, \
+ .output = 1, \
+ .indexed = 1, \
+ .channel = _channel, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_HARDWAREGAIN), \
+}
+
+static const struct iio_chan_spec admfm2000_channels[] = {
+ ADMFM2000_CHAN(0),
+ ADMFM2000_CHAN(1),
+};
+
+static int admfm2000_channel_config(struct admfm2000_state *st,
+ struct iio_dev *indio_dev)
+{
+ struct platform_device *pdev = to_platform_device(indio_dev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct fwnode_handle *child;
+ u32 reg, mode;
+ int ret;
+
+ device_for_each_child_node(dev, child) {
+ ret = fwnode_property_read_u32(child, "reg", ®);
+ if (ret) {
+ fwnode_handle_put(child);
+ return dev_err_probe(dev, ret,
+ "Failed to get reg property\n");
+ }
+
+ if (reg >= indio_dev->num_channels) {
+ fwnode_handle_put(child);
+ return dev_err_probe(dev, -EINVAL, "reg bigger than: %d\n",
+ indio_dev->num_channels);
+ }
+
+ ret = fwnode_property_read_u32(child, "adi,mode", &mode);
+ if (ret) {
+ fwnode_handle_put(child);
+ return dev_err_probe(dev, ret,
+ "Failed to get mode property\n");
+ }
+
+ if (mode >= 2) {
+ fwnode_handle_put(child);
+ return dev_err_probe(dev, -EINVAL, "mode bigger than: 1\n");
+ }
+
+ ret = admfm2000_mode(indio_dev, reg, mode);
+ if (ret) {
+ fwnode_handle_put(child);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int admfm2000_setup(struct admfm2000_state *st,
+ struct iio_dev *indio_dev)
+{
+ struct platform_device *pdev = to_platform_device(indio_dev->dev.parent);
+ struct device *dev = &pdev->dev;
+
+ st->sw_ch[0] = devm_gpiod_get_array(dev, "switch1", GPIOD_OUT_LOW);
+ if (IS_ERR(st->sw_ch[0]))
+ return dev_err_probe(dev, PTR_ERR(st->sw_ch[0]),
+ "Failed to get gpios\n");
+
+ if (st->sw_ch[0]->ndescs != ADMF20000_MODE_GPIOS) {
+ dev_err_probe(dev, -ENODEV, "%d GPIOs needed to operate\n",
+ ADMF20000_MODE_GPIOS);
+ return -ENODEV;
+ }
+
+ st->sw_ch[1] = devm_gpiod_get_array(dev, "switch2", GPIOD_OUT_LOW);
+ if (IS_ERR(st->sw_ch[1]))
+ return dev_err_probe(dev, PTR_ERR(st->sw_ch[1]),
+ "Failed to get gpios\n");
+
+ if (st->sw_ch[1]->ndescs != ADMF20000_MODE_GPIOS) {
+ dev_err_probe(dev, -ENODEV, "%d GPIOs needed to operate\n",
+ ADMF20000_MODE_GPIOS);
+ return -ENODEV;
+ }
+
+ st->dsa_gpios[0] = devm_gpiod_get_array(dev, "attenuation1",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(st->dsa_gpios[0]))
+ return dev_err_probe(dev, PTR_ERR(st->dsa_gpios[0]),
+ "Failed to get gpios\n");
+
+ if (st->dsa_gpios[0]->ndescs != ADMF20000_DSA_GPIOS) {
+ dev_err_probe(dev, -ENODEV, "%d GPIOs needed to operate\n",
+ ADMF20000_DSA_GPIOS);
+ return -ENODEV;
+ }
+
+ st->dsa_gpios[1] = devm_gpiod_get_array(dev, "attenuation2",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(st->dsa_gpios[1]))
+ return dev_err_probe(dev, PTR_ERR(st->dsa_gpios[1]),
+ "Failed to get gpios\n");
+
+ if (st->dsa_gpios[1]->ndescs != ADMF20000_DSA_GPIOS) {
+ dev_err_probe(dev, -ENODEV, "%d GPIOs needed to operate\n",
+ ADMF20000_DSA_GPIOS);
+ }
+
+ return 0;
+}
+
+static int admfm2000_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct iio_dev *indio_dev;
+ struct admfm2000_state *st;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+
+ indio_dev->name = "admfm2000";
+ indio_dev->num_channels = ARRAY_SIZE(admfm2000_channels);
+ indio_dev->channels = admfm2000_channels;
+ indio_dev->info = &admfm2000_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ st->gain[0] = ADMF20000_DEFAULT_GAIN;
+ st->gain[1] = ADMF20000_DEFAULT_GAIN;
+
+ mutex_init(&st->lock);
+
+ ret = admfm2000_setup(st, indio_dev);
+ if (ret)
+ return ret;
+
+ ret = admfm2000_channel_config(st, indio_dev);
+ if (ret)
+ return ret;
+
+ return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct of_device_id admfm2000_of_match[] = {
+ { .compatible = "adi,admfm2000" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, admfm2000_of_match);
+
+static struct platform_driver admfm2000_driver = {
+ .driver = {
+ .name = "admfm2000",
+ .of_match_table = admfm2000_of_match,
+ },
+ .probe = admfm2000_probe,
+};
+module_platform_driver(admfm2000_driver);
+
+MODULE_AUTHOR("Kim Seer Paller <kimseer.paller@...log.com>");
+MODULE_DESCRIPTION("ADMFM2000 Dual Microwave Down Converter");
+MODULE_LICENSE("GPL");
--
2.34.1
Powered by blists - more mailing lists