| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20231116-mbly-uart-v2-2-863f665ce520@bootlin.com>
Date: Thu, 16 Nov 2023 11:31:05 +0100
From: Théo Lebrun <theo.lebrun@...tlin.com>
To: Russell King <linux@...linux.org.uk>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jirislaby@...nel.org>
Cc: linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org,
Linus Walleij <linus.walleij@...aro.org>,
Grégory Clement <gregory.clement@...tlin.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Vladimir Kondratiev <vladimir.kondratiev@...ileye.com>,
Tawfik Bayouk <tawfik.bayouk@...ileye.com>,
Théo Lebrun <theo.lebrun@...tlin.com>
Subject: [PATCH v2 2/5] tty: serial: amba: Use BIT() macro for constant
declarations
The driver uses bit shifts and hexadecimal expressions to declare
constants. Replace that with the BIT() macro that clarifies intent.
Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@...tlin.com>
---
include/linux/amba/serial.h | 183 ++++++++++++++++++++++----------------------
1 file changed, 92 insertions(+), 91 deletions(-)
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index 27003ec52114..a1f966fcb9c5 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -10,6 +10,7 @@
#ifndef ASM_ARM_HARDWARE_SERIAL_AMBA_H
#define ASM_ARM_HARDWARE_SERIAL_AMBA_H
+#include <linux/bits.h>
#include <linux/types.h>
/* -------------------------------------------------------------------------------
@@ -70,64 +71,64 @@
#define ZX_UART011_ICR 0x4c
#define ZX_UART011_DMACR 0x50
-#define UART011_DR_OE (1 << 11)
-#define UART011_DR_BE (1 << 10)
-#define UART011_DR_PE (1 << 9)
-#define UART011_DR_FE (1 << 8)
-
-#define UART01x_RSR_OE 0x08
-#define UART01x_RSR_BE 0x04
-#define UART01x_RSR_PE 0x02
-#define UART01x_RSR_FE 0x01
-
-#define UART011_FR_RI 0x100
-#define UART011_FR_TXFE 0x080
-#define UART011_FR_RXFF 0x040
-#define UART01x_FR_TXFF 0x020
-#define UART01x_FR_RXFE 0x010
-#define UART01x_FR_BUSY 0x008
-#define UART01x_FR_DCD 0x004
-#define UART01x_FR_DSR 0x002
-#define UART01x_FR_CTS 0x001
+#define UART011_DR_OE BIT(11)
+#define UART011_DR_BE BIT(10)
+#define UART011_DR_PE BIT(9)
+#define UART011_DR_FE BIT(8)
+
+#define UART01x_RSR_OE BIT(3)
+#define UART01x_RSR_BE BIT(2)
+#define UART01x_RSR_PE BIT(1)
+#define UART01x_RSR_FE BIT(0)
+
+#define UART011_FR_RI BIT(8)
+#define UART011_FR_TXFE BIT(7)
+#define UART011_FR_RXFF BIT(6)
+#define UART01x_FR_TXFF BIT(5)
+#define UART01x_FR_RXFE BIT(4)
+#define UART01x_FR_BUSY BIT(3)
+#define UART01x_FR_DCD BIT(2)
+#define UART01x_FR_DSR BIT(1)
+#define UART01x_FR_CTS BIT(0)
#define UART01x_FR_TMSK (UART01x_FR_TXFF + UART01x_FR_BUSY)
/*
* Some bits of Flag Register on ZTE device have different position from
* standard ones.
*/
-#define ZX_UART01x_FR_BUSY 0x100
-#define ZX_UART01x_FR_DSR 0x008
-#define ZX_UART01x_FR_CTS 0x002
-#define ZX_UART011_FR_RI 0x001
-
-#define UART011_CR_CTSEN 0x8000 /* CTS hardware flow control */
-#define UART011_CR_RTSEN 0x4000 /* RTS hardware flow control */
-#define UART011_CR_OUT2 0x2000 /* OUT2 */
-#define UART011_CR_OUT1 0x1000 /* OUT1 */
-#define UART011_CR_RTS 0x0800 /* RTS */
-#define UART011_CR_DTR 0x0400 /* DTR */
-#define UART011_CR_RXE 0x0200 /* receive enable */
-#define UART011_CR_TXE 0x0100 /* transmit enable */
-#define UART011_CR_LBE 0x0080 /* loopback enable */
-#define UART010_CR_RTIE 0x0040
-#define UART010_CR_TIE 0x0020
-#define UART010_CR_RIE 0x0010
-#define UART010_CR_MSIE 0x0008
-#define ST_UART011_CR_OVSFACT 0x0008 /* Oversampling factor */
-#define UART01x_CR_IIRLP 0x0004 /* SIR low power mode */
-#define UART01x_CR_SIREN 0x0002 /* SIR enable */
-#define UART01x_CR_UARTEN 0x0001 /* UART enable */
-
-#define UART011_LCRH_SPS 0x80
+#define ZX_UART01x_FR_BUSY BIT(8)
+#define ZX_UART01x_FR_DSR BIT(3)
+#define ZX_UART01x_FR_CTS BIT(1)
+#define ZX_UART011_FR_RI BIT(0)
+
+#define UART011_CR_CTSEN BIT(15) /* CTS hardware flow control */
+#define UART011_CR_RTSEN BIT(14) /* RTS hardware flow control */
+#define UART011_CR_OUT2 BIT(13) /* OUT2 */
+#define UART011_CR_OUT1 BIT(12) /* OUT1 */
+#define UART011_CR_RTS BIT(11) /* RTS */
+#define UART011_CR_DTR BIT(10) /* DTR */
+#define UART011_CR_RXE BIT(9) /* receive enable */
+#define UART011_CR_TXE BIT(8) /* transmit enable */
+#define UART011_CR_LBE BIT(7) /* loopback enable */
+#define UART010_CR_RTIE BIT(6)
+#define UART010_CR_TIE BIT(5)
+#define UART010_CR_RIE BIT(4)
+#define UART010_CR_MSIE BIT(3)
+#define ST_UART011_CR_OVSFACT BIT(3) /* Oversampling factor */
+#define UART01x_CR_IIRLP BIT(2) /* SIR low power mode */
+#define UART01x_CR_SIREN BIT(1) /* SIR enable */
+#define UART01x_CR_UARTEN BIT(0) /* UART enable */
+
+#define UART011_LCRH_SPS BIT(7)
#define UART01x_LCRH_WLEN_8 0x60
#define UART01x_LCRH_WLEN_7 0x40
#define UART01x_LCRH_WLEN_6 0x20
#define UART01x_LCRH_WLEN_5 0x00
-#define UART01x_LCRH_FEN 0x10
-#define UART01x_LCRH_STP2 0x08
-#define UART01x_LCRH_EPS 0x04
-#define UART01x_LCRH_PEN 0x02
-#define UART01x_LCRH_BRK 0x01
+#define UART01x_LCRH_FEN BIT(4)
+#define UART01x_LCRH_STP2 BIT(3)
+#define UART01x_LCRH_EPS BIT(2)
+#define UART01x_LCRH_PEN BIT(1)
+#define UART01x_LCRH_BRK BIT(0)
#define ST_UART011_DMAWM_RX_1 (0 << 3)
#define ST_UART011_DMAWM_RX_2 (1 << 3)
@@ -144,10 +145,10 @@
#define ST_UART011_DMAWM_TX_32 5
#define ST_UART011_DMAWM_TX_48 6
-#define UART010_IIR_RTIS 0x08
-#define UART010_IIR_TIS 0x04
-#define UART010_IIR_RIS 0x02
-#define UART010_IIR_MIS 0x01
+#define UART010_IIR_RTIS BIT(3)
+#define UART010_IIR_TIS BIT(2)
+#define UART010_IIR_RIS BIT(1)
+#define UART010_IIR_MIS BIT(0)
#define UART011_IFLS_RX1_8 (0 << 3)
#define UART011_IFLS_RX2_8 (1 << 3)
@@ -163,45 +164,45 @@
#define UART011_IFLS_RX_HALF (5 << 3)
#define UART011_IFLS_TX_HALF (5 << 0)
-#define UART011_OEIM (1 << 10) /* overrun error interrupt mask */
-#define UART011_BEIM (1 << 9) /* break error interrupt mask */
-#define UART011_PEIM (1 << 8) /* parity error interrupt mask */
-#define UART011_FEIM (1 << 7) /* framing error interrupt mask */
-#define UART011_RTIM (1 << 6) /* receive timeout interrupt mask */
-#define UART011_TXIM (1 << 5) /* transmit interrupt mask */
-#define UART011_RXIM (1 << 4) /* receive interrupt mask */
-#define UART011_DSRMIM (1 << 3) /* DSR interrupt mask */
-#define UART011_DCDMIM (1 << 2) /* DCD interrupt mask */
-#define UART011_CTSMIM (1 << 1) /* CTS interrupt mask */
-#define UART011_RIMIM (1 << 0) /* RI interrupt mask */
-
-#define UART011_OEIS (1 << 10) /* overrun error interrupt status */
-#define UART011_BEIS (1 << 9) /* break error interrupt status */
-#define UART011_PEIS (1 << 8) /* parity error interrupt status */
-#define UART011_FEIS (1 << 7) /* framing error interrupt status */
-#define UART011_RTIS (1 << 6) /* receive timeout interrupt status */
-#define UART011_TXIS (1 << 5) /* transmit interrupt status */
-#define UART011_RXIS (1 << 4) /* receive interrupt status */
-#define UART011_DSRMIS (1 << 3) /* DSR interrupt status */
-#define UART011_DCDMIS (1 << 2) /* DCD interrupt status */
-#define UART011_CTSMIS (1 << 1) /* CTS interrupt status */
-#define UART011_RIMIS (1 << 0) /* RI interrupt status */
-
-#define UART011_OEIC (1 << 10) /* overrun error interrupt clear */
-#define UART011_BEIC (1 << 9) /* break error interrupt clear */
-#define UART011_PEIC (1 << 8) /* parity error interrupt clear */
-#define UART011_FEIC (1 << 7) /* framing error interrupt clear */
-#define UART011_RTIC (1 << 6) /* receive timeout interrupt clear */
-#define UART011_TXIC (1 << 5) /* transmit interrupt clear */
-#define UART011_RXIC (1 << 4) /* receive interrupt clear */
-#define UART011_DSRMIC (1 << 3) /* DSR interrupt clear */
-#define UART011_DCDMIC (1 << 2) /* DCD interrupt clear */
-#define UART011_CTSMIC (1 << 1) /* CTS interrupt clear */
-#define UART011_RIMIC (1 << 0) /* RI interrupt clear */
-
-#define UART011_DMAONERR (1 << 2) /* disable dma on error */
-#define UART011_TXDMAE (1 << 1) /* enable transmit dma */
-#define UART011_RXDMAE (1 << 0) /* enable receive dma */
+#define UART011_OEIM BIT(10) /* overrun error interrupt mask */
+#define UART011_BEIM BIT(9) /* break error interrupt mask */
+#define UART011_PEIM BIT(8) /* parity error interrupt mask */
+#define UART011_FEIM BIT(7) /* framing error interrupt mask */
+#define UART011_RTIM BIT(6) /* receive timeout interrupt mask */
+#define UART011_TXIM BIT(5) /* transmit interrupt mask */
+#define UART011_RXIM BIT(4) /* receive interrupt mask */
+#define UART011_DSRMIM BIT(3) /* DSR interrupt mask */
+#define UART011_DCDMIM BIT(2) /* DCD interrupt mask */
+#define UART011_CTSMIM BIT(1) /* CTS interrupt mask */
+#define UART011_RIMIM BIT(0) /* RI interrupt mask */
+
+#define UART011_OEIS BIT(10) /* overrun error interrupt status */
+#define UART011_BEIS BIT(9) /* break error interrupt status */
+#define UART011_PEIS BIT(8) /* parity error interrupt status */
+#define UART011_FEIS BIT(7) /* framing error interrupt status */
+#define UART011_RTIS BIT(6) /* receive timeout interrupt status */
+#define UART011_TXIS BIT(5) /* transmit interrupt status */
+#define UART011_RXIS BIT(4) /* receive interrupt status */
+#define UART011_DSRMIS BIT(3) /* DSR interrupt status */
+#define UART011_DCDMIS BIT(2) /* DCD interrupt status */
+#define UART011_CTSMIS BIT(1) /* CTS interrupt status */
+#define UART011_RIMIS BIT(0) /* RI interrupt status */
+
+#define UART011_OEIC BIT(10) /* overrun error interrupt clear */
+#define UART011_BEIC BIT(9) /* break error interrupt clear */
+#define UART011_PEIC BIT(8) /* parity error interrupt clear */
+#define UART011_FEIC BIT(7) /* framing error interrupt clear */
+#define UART011_RTIC BIT(6) /* receive timeout interrupt clear */
+#define UART011_TXIC BIT(5) /* transmit interrupt clear */
+#define UART011_RXIC BIT(4) /* receive interrupt clear */
+#define UART011_DSRMIC BIT(3) /* DSR interrupt clear */
+#define UART011_DCDMIC BIT(2) /* DCD interrupt clear */
+#define UART011_CTSMIC BIT(1) /* CTS interrupt clear */
+#define UART011_RIMIC BIT(0) /* RI interrupt clear */
+
+#define UART011_DMAONERR BIT(2) /* disable dma on error */
+#define UART011_TXDMAE BIT(1) /* enable transmit dma */
+#define UART011_RXDMAE BIT(0) /* enable receive dma */
#define UART01x_RSR_ANY (UART01x_RSR_OE | UART01x_RSR_BE | UART01x_RSR_PE | UART01x_RSR_FE)
#define UART01x_FR_MODEM_ANY (UART01x_FR_DCD | UART01x_FR_DSR | UART01x_FR_CTS)
--
2.41.0
Powered by blists - more mailing lists