linux-kernel - [PATCH v4 3/3] LoongArch: KVM: Remove kvm_acquire

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231116023036.2324371-4-maobibo@loongson.cn>
Date:   Thu, 16 Nov 2023 10:30:36 +0800
From:   Bibo Mao <maobibo@...ngson.cn>
To:     Tianrui Zhao <zhaotianrui@...ngson.cn>,
        Huacai Chen <chenhuacai@...nel.org>
Cc:     WANG Xuerui <kernel@...0n.name>, kvm@...r.kernel.org,
        loongarch@...ts.linux.dev, linux-kernel@...r.kernel.org
Subject: [PATCH v4 3/3] LoongArch: KVM: Remove kvm_acquire_timer before entering guest

Timer emulation method in VM is switch to SW timer, there are two
places where timer emulation is needed. One is during vcpu thread
context switch, the other is halt-polling with idle instruction
emulation. SW timer switching is remove during halt-polling mode,
so it is not necessary to disable SW timer before entering to guest.

This patch removes SW timer handling before entering guest mode, and
put it in HW timer restoring flow when vcpu thread is sched-in. With
this patch, vm timer emulation is simpler, there is SW/HW timer
switch only in vcpu thread context switch scenario.

Signed-off-by: Bibo Mao <maobibo@...ngson.cn>
---
 arch/loongarch/include/asm/kvm_vcpu.h |  1 -
 arch/loongarch/kvm/timer.c            | 22 ++++++--------------
 arch/loongarch/kvm/vcpu.c             | 29 ---------------------------
 3 files changed, 6 insertions(+), 46 deletions(-)

diff --git a/arch/loongarch/include/asm/kvm_vcpu.h b/arch/loongarch/include/asm/kvm_vcpu.h
index 553cfa2b2b1c..0e87652f780a 100644
--- a/arch/loongarch/include/asm/kvm_vcpu.h
+++ b/arch/loongarch/include/asm/kvm_vcpu.h
@@ -55,7 +55,6 @@ void kvm_save_fpu(struct loongarch_fpu *fpu);
 void kvm_restore_fpu(struct loongarch_fpu *fpu);
 void kvm_restore_fcsr(struct loongarch_fpu *fpu);
 
-void kvm_acquire_timer(struct kvm_vcpu *vcpu);
 void kvm_init_timer(struct kvm_vcpu *vcpu, unsigned long hz);
 void kvm_reset_timer(struct kvm_vcpu *vcpu);
 void kvm_save_timer(struct kvm_vcpu *vcpu);
diff --git a/arch/loongarch/kvm/timer.c b/arch/loongarch/kvm/timer.c
index e37c0ebffabd..711982f9eeb5 100644
--- a/arch/loongarch/kvm/timer.c
+++ b/arch/loongarch/kvm/timer.c
@@ -64,19 +64,6 @@ void kvm_init_timer(struct kvm_vcpu *vcpu, unsigned long timer_hz)
 	kvm_write_sw_gcsr(vcpu->arch.csr, LOONGARCH_CSR_TVAL, 0);
 }
 
-/*
- * Restore hard timer state and enable guest to access timer registers
- * without trap, should be called with irq disabled
- */
-void kvm_acquire_timer(struct kvm_vcpu *vcpu)
-{
-	/*
-	 * Freeze the soft-timer and sync the guest stable timer with it. We do
-	 * this with interrupts disabled to avoid latency.
-	 */
-	hrtimer_cancel(&vcpu->arch.swtimer);
-}
-
 /*
  * Restore soft timer state from saved context.
  */
@@ -98,6 +85,11 @@ void kvm_restore_timer(struct kvm_vcpu *vcpu)
 		return;
 	}
 
+	/*
+	 * Freeze the soft-timer and sync the guest stable timer with it.
+	 */
+	hrtimer_cancel(&vcpu->arch.swtimer);
+
 	/*
 	 * Set remainder tick value if not expired
 	 */
@@ -115,7 +107,7 @@ void kvm_restore_timer(struct kvm_vcpu *vcpu)
 		/*
 		 * Inject timer here though sw timer should inject timer
 		 * interrupt async already, since sw timer may be cancelled
-		 * during injecting intr async in function kvm_acquire_timer
+		 * during injecting intr async
 		 */
 		kvm_queue_irq(vcpu, INT_TI);
 	}
@@ -140,11 +132,9 @@ static void _kvm_save_timer(struct kvm_vcpu *vcpu)
 	vcpu->arch.expire = expire;
 	if (ticks) {
 		/*
-		 * Update hrtimer to use new timeout
 		 * HRTIMER_MODE_PINNED is suggested since vcpu may run in
 		 * the same physical cpu in next time
 		 */
-		hrtimer_cancel(&vcpu->arch.swtimer);
 		hrtimer_start(&vcpu->arch.swtimer, expire, HRTIMER_MODE_ABS_PINNED);
 	} else if (vcpu->stat.generic.blocking) {
 		/*
diff --git a/arch/loongarch/kvm/vcpu.c b/arch/loongarch/kvm/vcpu.c
index 42663a345bd1..cf1c4d64c1b7 100644
--- a/arch/loongarch/kvm/vcpu.c
+++ b/arch/loongarch/kvm/vcpu.c
@@ -95,7 +95,6 @@ static int kvm_pre_enter_guest(struct kvm_vcpu *vcpu)
 		 * check vmid before vcpu enter guest
 		 */
 		local_irq_disable();
-		kvm_acquire_timer(vcpu);
 		kvm_deliver_intr(vcpu);
 		kvm_deliver_exception(vcpu);
 		/* Make sure the vcpu mode has been written */
@@ -251,23 +250,6 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 	return -EINVAL;
 }
 
-/**
- * kvm_migrate_count() - Migrate timer.
- * @vcpu:       Virtual CPU.
- *
- * Migrate hrtimer to the current CPU by cancelling and restarting it
- * if the hrtimer is active.
- *
- * Must be called when the vCPU is migrated to a different CPU, so that
- * the timer can interrupt the guest at the new CPU, and the timer irq can
- * be delivered to the vCPU.
- */
-static void kvm_migrate_count(struct kvm_vcpu *vcpu)
-{
-	if (hrtimer_cancel(&vcpu->arch.swtimer))
-		hrtimer_restart(&vcpu->arch.swtimer);
-}
-
 static int _kvm_getcsr(struct kvm_vcpu *vcpu, unsigned int id, u64 *val)
 {
 	unsigned long gintc;
@@ -796,17 +778,6 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	if (vcpu->arch.last_sched_cpu != cpu) {
-		kvm_debug("[%d->%d]KVM vCPU[%d] switch\n",
-				vcpu->arch.last_sched_cpu, cpu, vcpu->vcpu_id);
-		/*
-		 * Migrate the timer interrupt to the current CPU so that it
-		 * always interrupts the guest and synchronously triggers a
-		 * guest timer interrupt.
-		 */
-		kvm_migrate_count(vcpu);
-	}
-
 	/* Restore guest state to registers */
 	_kvm_vcpu_load(vcpu, cpu);
 	local_irq_restore(flags);
-- 
2.39.3