linux-kernel - Re: [RFC 4/6] media: verisilicon: Update H1 register definitions

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <aea36e0b-216a-44a1-ac64-ca45b0ce0f85@collabora.com>
Date:   Fri, 17 Nov 2023 09:46:45 +0100
From:   Andrzej Pietrasiewicz <andrzej.p@...labora.com>
To:     Chen-Yu Tsai <wenst@...omium.org>
Cc:     linux-media@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-rockchip@...ts.infradead.org,
        linux-stm32@...md-mailman.stormreply.com,
        Hugues Fruchet <hugues.fruchet@...s.st.com>,
        Alexandre Torgue <alexandre.torgue@...s.st.com>,
        Benjamin Gaignard <benjamin.gaignard@...labora.com>,
        Daniel Almeida <daniel.almeida@...labora.com>,
        Ezequiel Garcia <ezequiel@...guardiasur.com.ar>,
        Hans Verkuil <hverkuil-cisco@...all.nl>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Nicolas Dufresne <nicolas.dufresne@...labora.com>,
        Philipp Zabel <p.zabel@...gutronix.de>, kernel@...labora.com
Subject: Re: [RFC 4/6] media: verisilicon: Update H1 register definitions

Hi,

W dniu 17.11.2023 o 07:56, Chen-Yu Tsai pisze:
> On Thu, Nov 16, 2023 at 11:48 PM Andrzej Pietrasiewicz
> <andrzej.p@...labora.com> wrote:
>>
>> Add definition of register at offset 0x00c.
>>
>> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@...labora.com>
>> ---
>>   drivers/media/platform/verisilicon/hantro_h1_regs.h | 9 +++++++++
>>   1 file changed, 9 insertions(+)
>>
>> diff --git a/drivers/media/platform/verisilicon/hantro_h1_regs.h b/drivers/media/platform/verisilicon/hantro_h1_regs.h
>> index c1c66c934a24..efb46da23eab 100644
>> --- a/drivers/media/platform/verisilicon/hantro_h1_regs.h
>> +++ b/drivers/media/platform/verisilicon/hantro_h1_regs.h
>> @@ -23,6 +23,15 @@
>>   #define     H1_REG_AXI_CTRL_INPUT_SWAP32               BIT(2)
>>   #define     H1_REG_AXI_CTRL_OUTPUT_SWAP8               BIT(1)
>>   #define     H1_REG_AXI_CTRL_INPUT_SWAP8                        BIT(0)
>> +#define H1_REG_DEVICE_CTRL                             0x00c
>> +#define     H1_REG_DEVICE_CTRL_SCALE_OUTPUT_SWAP8      BIT(27)
>> +#define     H1_REG_DEVICE_CTRL_SCALE_OUTPUT_SWAP16     BIT(26)
>> +#define     H1_REG_DEVICE_CTRL_SCALE_OUTPUT_SWAP32     BIT(25)
>> +#define     H1_REG_DEVICE_CTRL_MV_OUTPUT_SWAP8         BIT(24)
>> +#define     H1_REG_DEVICE_CTRL_MV_OUTPUT_SWAP16                BIT(23)
>> +#define     H1_REG_DEVICE_CTRL_MV_OUTPUT_SWAP32                BIT(22)
>> +#define     H1_REG_DEVICE_CTRL_INPUT_READ_1MB          BIT(21)
>> +#define     H1_REG_DEVICE_CTRL_AXI_DUAL_CHANNEL                BIT(20)
> 
> According to the i.MX8M Mini reference manual, this bit is a "disable"
> control, i.e. setting this bit disables dual channel AXI. I think the
> macro should explicitly state this in the naming, so something like
> H1_REG_DEVICE_CTRL_DISABLE_AXI_DUAL_CH(ANNEL).

Good point, thanks.

Andrzej

> 
> Other bits matches the reference manual.
> 
>>   #define H1_REG_ADDR_OUTPUT_STREAM                      0x014
>>   #define H1_REG_ADDR_OUTPUT_CTRL                                0x018
>>   #define H1_REG_ADDR_REF_LUMA                           0x01c
>> --
>> 2.25.1
>>
>>
> _______________________________________________
> Kernel mailing list -- kernel@...lman.collabora.com
> To unsubscribe send an email to kernel-leave@...lman.collabora.com