[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231117094425.80477-8-ilpo.jarvinen@linux.intel.com>
Date: Fri, 17 Nov 2023 11:44:25 +0200
From: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To: "John W. Linville" <linville@...driver.com>,
Kalle Valo <kvalo@...nel.org>,
Larry Finger <Larry.Finger@...inger.net>,
linux-wireless@...r.kernel.org, Ping-Ke Shih <pkshih@...ltek.com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
linux-kernel@...r.kernel.org
Cc: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
Subject: [PATCH 7/7] rtlwifi: rtl8821ae: Access full PMCS reg and use pci_regs.h
_rtl8821ae_clear_pci_pme_status() accesses the upper byte of the Power
Management Control/Status register (PMCS) with literal 5 offset.
Access the entire PMCS register using defines from pci_regs.h to
improve code readability.
While at it, remove the obvious comment and tweak debug prints
slightly to not sound misleading.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
---
.../wireless/realtek/rtlwifi/rtl8821ae/hw.c | 21 +++++++------------
1 file changed, 7 insertions(+), 14 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
index 7cc648d49f2d..f4b232f038a9 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
@@ -2271,7 +2271,7 @@ static void _rtl8821ae_clear_pci_pme_status(struct ieee80211_hw *hw)
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
struct pci_dev *pdev = rtlpci->pdev;
- u8 pmcs_reg;
+ u16 pmcs_reg;
u8 pm_cap;
pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
@@ -2281,23 +2281,16 @@ static void _rtl8821ae_clear_pci_pme_status(struct ieee80211_hw *hw)
return;
}
- /* Get the PM CSR (Control/Status Register),
- * The PME_Status is located at PM Capatibility offset 5, bit 7
- */
- pci_read_config_byte(pdev, pm_cap + 5, &pmcs_reg);
-
- if (pmcs_reg & BIT(7)) {
+ pci_read_config_word(pdev, pm_cap + PCI_PM_CTRL, &pmcs_reg);
+ if (pmcs_reg & PCI_PM_CTRL_PME_STATUS) {
/* Clear PME_Status with write */
- pci_write_config_byte(pdev, pm_cap + 5, pmcs_reg);
- /* Read it back to check */
- pci_read_config_byte(pdev, pm_cap + 5, &pmcs_reg);
+ pci_write_config_word(pdev, pm_cap + PCI_PM_CTRL, pmcs_reg);
+ pci_read_config_word(pdev, pm_cap + PCI_PM_CTRL, &pmcs_reg);
rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG,
- "Clear PME status 0x%2x to 0x%2x\n",
- pm_cap + 5, pmcs_reg);
+ "Cleared PME status, PMCS reg = 0x%4x\n", pmcs_reg);
} else {
rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG,
- "PME status(0x%2x) = 0x%2x\n",
- pm_cap + 5, pmcs_reg);
+ "PMCS reg = 0x%4x\n", pmcs_reg);
}
}
--
2.30.2
Powered by blists - more mailing lists