linux-kernel - Re: [PATCH 3/9] net: mdio: ipq4019: Enable GPIO reset for ipq5332 platform

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <7e856fc9-25c7-489f-8a42-759ed126ae68@quicinc.com>
Date:   Fri, 17 Nov 2023 17:59:51 +0800
From:   Jie Luo <quic_luoj@...cinc.com>
To:     Andrew Lunn <andrew@...n.ch>
CC:     <agross@...nel.org>, <andersson@...nel.org>,
        <konrad.dybcio@...aro.org>, <davem@...emloft.net>,
        <edumazet@...gle.com>, <kuba@...nel.org>, <pabeni@...hat.com>,
        <robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
        <conor+dt@...nel.org>, <hkallweit1@...il.com>,
        <linux@...linux.org.uk>, <robert.marko@...tura.hr>,
        <linux-arm-msm@...r.kernel.org>, <netdev@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <quic_srichara@...cinc.com>
Subject: Re: [PATCH 3/9] net: mdio: ipq4019: Enable GPIO reset for ipq5332
 platform



On 11/17/2023 1:20 AM, Andrew Lunn wrote:
>> FYI, here is the sequence to bring up qca8084.
>> a. enable clock output to qca8084.
>> b. do gpio reset of qca8084.
>> c. customize MDIO address and initialization configurations.
>> d. the PHY ID can be acquired.
> 
> This all sounds like it is specific to the qca8084, so it should be in
> the driver for the qca8084.
> 
> Its been pointed out you can get the driver to load by using the PHY
> ID in the compatible. You want the SoC clock driver to export a CCF
> clock, which the PHY driver can use. The PHY driver should also be
> able to get the GPIO. So i think the PHY driver can do all this.
> 
>       Andrew

Yes, Andrew, that is feasible, i will update the patches to move the
initialized clock configs in the PHY probe function.