lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231117100958.425354-2-robimarko@gmail.com>
Date:   Fri, 17 Nov 2023 11:09:49 +0100
From:   Robert Marko <robimarko@...il.com>
To:     andrew@...n.ch, hkallweit1@...il.com, linux@...linux.org.uk,
        davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
        pabeni@...hat.com, ansuelsmth@...il.com, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org
Cc:     Robert Marko <robimarko@...il.com>
Subject: [PATCH net-next 2/2] net: phy: aquantia: enable USXGMII autoneg on AQR107

In case USXGMII is being used as the PHY interface mode then USXGMII
autoneg must be enabled as well.

HW defaults to USXGMII autoneg being disabled which then results in
autoneg timeout, so enable it in case USXGMII is used.

Signed-off-by: Robert Marko <robimarko@...il.com>
---
 drivers/net/phy/aquantia/aquantia_main.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index 7711e052e737..c602873052a0 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -26,6 +26,9 @@
 #define PHY_ID_AQR412	0x03a1b712
 #define PHY_ID_AQR113C	0x31c31c12
 
+#define MDIO_PHYXS_XAUI_RX_VEND2		0xc441
+#define MDIO_PHYXS_XAUI_RX_VEND2_USX_AUTONEG_EN	BIT(3)
+
 #define MDIO_PHYXS_VEND_IF_STATUS		0xe812
 #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK	GENMASK(7, 3)
 #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR	0
@@ -545,6 +548,15 @@ static int aqr107_config_init(struct phy_device *phydev)
 
 	aqr107_validate_mode(phydev, phydev->interface);
 
+	if (phydev->interface == PHY_INTERFACE_MODE_USXGMII) {
+		ret = phy_modify_mmd(phydev, MDIO_MMD_PHYXS,
+				     MDIO_PHYXS_XAUI_RX_VEND2,
+				     MDIO_PHYXS_XAUI_RX_VEND2_USX_AUTONEG_EN,
+				     MDIO_PHYXS_XAUI_RX_VEND2_USX_AUTONEG_EN);
+		if (ret)
+			return ret;
+	}
+
 	return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
 }
 
-- 
2.42.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ