| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAK00qKC8K7=_3247mv6AHBCgXqWYjJyL3++=kKdT4V7OHdnc-g@mail.gmail.com>
Date: Fri, 17 Nov 2023 18:49:51 +0800
From: Victor Shih <victorshihgli@...il.com>
To: Ulf Hansson <ulf.hansson@...aro.org>
Cc: adrian.hunter@...el.com, linux-mmc@...r.kernel.org,
linux-kernel@...r.kernel.org, benchuanggli@...il.com,
HL.Liu@...esyslogic.com.tw, Greg.tu@...esyslogic.com.tw,
takahiro.akashi@...aro.org, dlunev@...omium.org,
Ben Chuang <ben.chuang@...esyslogic.com.tw>,
Victor Shih <victor.shih@...esyslogic.com.tw>
Subject: Re: [PATCH V12 11/23] mmc: sdhci-uhs2: add set_power() to support vdd2
On Tue, Oct 3, 2023 at 5:46 PM Ulf Hansson <ulf.hansson@...aro.org> wrote:
>
> On Fri, 15 Sept 2023 at 11:44, Victor Shih <victorshihgli@...il.com> wrote:
> >
> > From: Victor Shih <victor.shih@...esyslogic.com.tw>
> >
> > This is a UHS-II version of sdhci's set_power operation.
> > VDD2, as well as VDD, is handled here.
>
> Okay, but why?
>
> Please justify the change in the commit messages, don't just tell what
> is being done. This applied to the whole series - and I believe I have
> said this before too.
>
Hi, Ulf
I will try to update this in version 13.
Thanks, Victor Shih
> >
> > Signed-off-by: Ben Chuang <ben.chuang@...esyslogic.com.tw>
> > Signed-off-by: AKASHI Takahiro <takahiro.akashi@...aro.org>
> > Signed-off-by: Victor Shih <victor.shih@...esyslogic.com.tw>
> > Acked-by: Adrian Hunter <adrian.hunter@...el.com>
> > ---
> >
> > Updates in V10:
> > - Move some definitions of PatchV9[05/23] to PatchV10[11/23].
> >
> > Updates in V9:
> > - Modify annotations in sdhci_get_vdd_value().
> >
> > Updates in V8:
> > - Adjust the position of matching brackets.
> > - Add the initial value of the pwr in sdhci_uhs2_set_power().
> >
> > Updates in V7:
> > - Add clear the power reg before setting a new value
> > in sdhci_uhs2_set_power().
> > - Add MMC_VDD_34_35 case and MMC_VDD_35_36 case in sdhci_get_vdd_value().
> > - Drop pwr variable in sdhci_get_vdd_value().
> >
> > Updates in V6:
> > - Add mmc_opt_regulator_set_ocr().
> > - Remove unnecessary functions.
> >
> > ---
> >
> > drivers/mmc/host/sdhci-uhs2.c | 48 +++++++++++++++++++++++++++
> > drivers/mmc/host/sdhci.c | 61 +++++++++++++++++++----------------
> > drivers/mmc/host/sdhci.h | 1 +
> > include/linux/mmc/host.h | 1 +
> > 4 files changed, 83 insertions(+), 28 deletions(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
> > index dfc80a7f1bad..fc37a34629c2 100644
> > --- a/drivers/mmc/host/sdhci-uhs2.c
> > +++ b/drivers/mmc/host/sdhci-uhs2.c
> > @@ -57,6 +57,13 @@ EXPORT_SYMBOL_GPL(sdhci_uhs2_dump_regs);
> > * *
> > \*****************************************************************************/
> >
> > +static inline int mmc_opt_regulator_set_ocr(struct mmc_host *mmc,
> > + struct regulator *supply,
> > + unsigned short vdd_bit)
> > +{
> > + return IS_ERR_OR_NULL(supply) ? 0 : mmc_regulator_set_ocr(mmc, supply, vdd_bit);
> > +}
> > +
> > bool sdhci_uhs2_mode(struct sdhci_host *host)
> > {
> > return host->mmc->flags & MMC_UHS2_SUPPORT;
> > @@ -94,6 +101,47 @@ void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask)
> > }
> > EXPORT_SYMBOL_GPL(sdhci_uhs2_reset);
> >
> > +static void sdhci_uhs2_set_power(struct sdhci_host *host, unsigned char mode, unsigned short vdd)
> > +{
> > + struct mmc_host *mmc = host->mmc;
> > + u8 pwr = 0;
> > +
> > + if (mode != MMC_POWER_OFF) {
> > + pwr = sdhci_get_vdd_value(vdd);
> > + if (!pwr)
> > + WARN(1, "%s: Invalid vdd %#x\n",
> > + mmc_hostname(host->mmc), vdd);
> > + pwr |= SDHCI_VDD2_POWER_180;
> > + }
> > +
> > + if (host->pwr == pwr)
> > + return;
> > + host->pwr = pwr;
> > +
> > + if (pwr == 0) {
> > + sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
> > +
> > + mmc_opt_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
> > + mmc_opt_regulator_set_ocr(mmc, mmc->supply.vmmc2, 0);
>
> We added mmc_regulator_set_vqmmc2() in patch4. Please use that instead.
>
Hi, Ulf
I will update this in version 13.
Thanks, Victor Shih
> > + } else {
> > + mmc_opt_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
> > + /* support 1.8v only for now */
> > + mmc_opt_regulator_set_ocr(mmc, mmc->supply.vmmc2, fls(MMC_VDD_165_195) - 1);
> > +
> > + /* Clear the power reg before setting a new value */
> > + sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
> > +
> > + /* vdd first */
> > + pwr |= SDHCI_POWER_ON;
> > + sdhci_writeb(host, pwr & 0xf, SDHCI_POWER_CONTROL);
> > + mdelay(5);
> > +
> > + pwr |= SDHCI_VDD2_POWER_ON;
> > + sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
> > + mdelay(5);
> > + }
> > +}
> > +
> > /*****************************************************************************\
> > * *
> > * Driver init/exit *
> > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> > index 753b251179f2..eca54a16e7fc 100644
> > --- a/drivers/mmc/host/sdhci.c
> > +++ b/drivers/mmc/host/sdhci.c
> > @@ -23,7 +23,7 @@
> > #include <linux/regulator/consumer.h>
> > #include <linux/pm_runtime.h>
> > #include <linux/of.h>
> > -
> > +#include <linux/bug.h>
> > #include <linux/leds.h>
> >
> > #include <linux/mmc/mmc.h>
> > @@ -2061,41 +2061,46 @@ static void sdhci_set_power_reg(struct sdhci_host *host, unsigned char mode,
> > sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
> > }
> >
> > +unsigned short sdhci_get_vdd_value(unsigned short vdd)
> > +{
> > + switch (1 << vdd) {
> > + case MMC_VDD_165_195:
> > + /*
> > + * Without a regulator, SDHCI does not support 2.0v
> > + * so we only get here if the driver deliberately
> > + * added the 2.0v range to ocr_avail. Map it to 1.8v
> > + * for the purpose of turning on the power.
> > + */
> > + case MMC_VDD_20_21:
> > + return SDHCI_POWER_180;
> > + case MMC_VDD_29_30:
> > + case MMC_VDD_30_31:
> > + return SDHCI_POWER_300;
> > + case MMC_VDD_32_33:
> > + case MMC_VDD_33_34:
> > + /*
> > + * 3.4V ~ 3.6V are valid only for those platforms where it's
> > + * known that the voltage range is supported by hardware.
> > + */
> > + case MMC_VDD_34_35:
> > + case MMC_VDD_35_36:
> > + return SDHCI_POWER_330;
> > + default:
> > + return 0;
> > + }
> > +}
> > +EXPORT_SYMBOL_GPL(sdhci_get_vdd_value);
> > +
> > void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
> > unsigned short vdd)
> > {
> > u8 pwr = 0;
> >
> > if (mode != MMC_POWER_OFF) {
> > - switch (1 << vdd) {
> > - case MMC_VDD_165_195:
> > - /*
> > - * Without a regulator, SDHCI does not support 2.0v
> > - * so we only get here if the driver deliberately
> > - * added the 2.0v range to ocr_avail. Map it to 1.8v
> > - * for the purpose of turning on the power.
> > - */
> > - case MMC_VDD_20_21:
> > - pwr = SDHCI_POWER_180;
> > - break;
> > - case MMC_VDD_29_30:
> > - case MMC_VDD_30_31:
> > - pwr = SDHCI_POWER_300;
> > - break;
> > - case MMC_VDD_32_33:
> > - case MMC_VDD_33_34:
> > - /*
> > - * 3.4 ~ 3.6V are valid only for those platforms where it's
> > - * known that the voltage range is supported by hardware.
> > - */
> > - case MMC_VDD_34_35:
> > - case MMC_VDD_35_36:
> > - pwr = SDHCI_POWER_330;
> > - break;
> > - default:
> > + pwr = sdhci_get_vdd_value(vdd);
> > + if (!pwr) {
> > WARN(1, "%s: Invalid vdd %#x\n",
> > mmc_hostname(host->mmc), vdd);
> > - break;
> > }
> > }
> >
> > diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> > index 43ad3f4b7672..f3bd558b337f 100644
> > --- a/drivers/mmc/host/sdhci.h
> > +++ b/drivers/mmc/host/sdhci.h
> > @@ -837,6 +837,7 @@ void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
> > void sdhci_set_power_and_bus_voltage(struct sdhci_host *host,
> > unsigned char mode,
> > unsigned short vdd);
> > +unsigned short sdhci_get_vdd_value(unsigned short vdd);
> > void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
> > unsigned short vdd);
> > int sdhci_get_cd_nogpio(struct mmc_host *mmc);
> > diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> > index 6c8258310641..610644a0ace5 100644
> > --- a/include/linux/mmc/host.h
> > +++ b/include/linux/mmc/host.h
> > @@ -363,6 +363,7 @@ struct mmc_pwrseq;
> >
> > struct mmc_supply {
> > struct regulator *vmmc; /* Card power supply */
> > + struct regulator *vmmc2; /* UHS2 VDD2 power supply */
>
> In patch4 we added vqmmc2. Please use that instead.
>
Hi, Ulf
I will update this in version 13.
Thanks, Victor Shih
> > struct regulator *vqmmc; /* Optional Vccq supply */
> > struct regulator *vqmmc2; /* Optional supply for phy */
> > };
> > --
> > 2.25.1
> >
>
> Kind regards
> Uffe
Powered by blists - more mailing lists