| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231117125056.32503-4-quic_kbajaj@quicinc.com>
Date: Fri, 17 Nov 2023 18:20:56 +0530
From: Komal Bajaj <quic_kbajaj@...cinc.com>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
CC: <linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
Komal Bajaj <quic_kbajaj@...cinc.com>,
"Naina Mehta" <quic_nainmeht@...cinc.com>
Subject: [PATCH v4 3/3] arm64: dts: qcom: Add base qcs6490-rb3gen2 board dts
Add DTS for Qualcomm qcs6490-rb3gen2 board which uses
QCS6490 SoC. This adds debug uart and usb support along
with regulators found on this board.
Co-developed-by: Naina Mehta <quic_nainmeht@...cinc.com>
Signed-off-by: Naina Mehta <quic_nainmeht@...cinc.com>
Signed-off-by: Komal Bajaj <quic_kbajaj@...cinc.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 409 +++++++++++++++++++
2 files changed, 410 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 77babebe4904..4c0f9e4a2e5b 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -90,6 +90,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb
dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb
dtb-$(CONFIG_ARCH_QCOM) += qrb4210-rb2.dtb
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
new file mode 100644
index 000000000000..dfe5df273dd4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -0,0 +1,409 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+/* PM7250B is configured to use SID8/9 */
+#define PM7250B_SID 8
+#define PM7250B_SID1 9
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7280.dtsi"
+#include "pm7250b.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &remoteproc_mpss;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &video_mem;
+/delete-node/ &wlan_ce_mem;
+/delete-node/ &xbl_mem;
+
+/ {
+ model = "Qualcomm Technologies, Inc. Robotics RB3gen2";
+ compatible = "qcom,qcs6490-rb3gen2", "qcom,qcm6490";
+ chassis-type = "embedded";
+
+ aliases {
+ serial0 = &uart5;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reserved-memory {
+ xbl_mem: xbl@...00000 {
+ reg = <0x0 0x80700000 0x0 0x100000>;
+ no-map;
+ };
+
+ cdsp_secure_heap_mem: cdsp-secure-heap@...00000 {
+ reg = <0x0 0x81800000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ camera_mem: camera@...00000 {
+ reg = <0x0 0x84300000 0x0 0x500000>;
+ no-map;
+ };
+
+ wpss_mem: wpss@...00000 {
+ reg = <0x0 0x84800000 0x0 0x1900000>;
+ no-map;
+ };
+
+ adsp_mem: adsp@...00000 {
+ reg = <0x0 0x86100000 0x0 0x2800000>;
+ no-map;
+ };
+
+ cdsp_mem: cdsp@...00000 {
+ reg = <0x0 0x88900000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ video_mem: video@...00000 {
+ reg = <0x0 0x8a700000 0x0 0x700000>;
+ no-map;
+ };
+
+ cvp_mem: cvp@...00000 {
+ reg = <0x0 0x8ae00000 0x0 0x500000>;
+ no-map;
+ };
+
+ ipa_fw_mem: ipa-fw@...00000 {
+ reg = <0x0 0x8b300000 0x0 0x10000>;
+ no-map;
+ };
+
+ ipa_gsi_mem: ipa-gsi@...10000 {
+ reg = <0x0 0x8b310000 0x0 0xa000>;
+ no-map;
+ };
+
+ gpu_microcode_mem: gpu-microcode@...1a000 {
+ reg = <0x0 0x8b31a000 0x0 0x2000>;
+ no-map;
+ };
+
+ tz_stat_mem: tz-stat@...00000 {
+ reg = <0x0 0xc0000000 0x0 0x100000>;
+ no-map;
+ };
+
+ tags_mem: tags@...00000 {
+ reg = <0x0 0xc0100000 0x0 0x1200000>;
+ no-map;
+ };
+
+ qtee_mem: qtee@...00000 {
+ reg = <0x0 0xc1300000 0x0 0x500000>;
+ no-map;
+ };
+
+ trusted_apps_mem: trusted_apps@...00000 {
+ reg = <0x0 0xc1800000 0x0 0x1c00000>;
+ no-map;
+ };
+
+ debug_vm_mem: debug-vm@...00000 {
+ reg = <0x0 0xd0600000 0x0 0x100000>;
+ no-map;
+ };
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm7325-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vreg_s1b_1p872: smps1 {
+ regulator-min-microvolt = <1840000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_s2b_0p876: smps2 {
+ regulator-min-microvolt = <570070>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ vreg_s7b_0p972: smps7 {
+ regulator-min-microvolt = <535000>;
+ regulator-max-microvolt = <1120000>;
+ };
+
+ vreg_s8b_1p272: smps8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+ };
+
+ vreg_l1b_0p912: ldo1 {
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <925000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p072: ldo2 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3b_0p504: ldo3 {
+ regulator-min-microvolt = <312000>;
+ regulator-max-microvolt = <910000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4b_0p752: ldo4 {
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <820000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ reg_l5b_0p752: ldo5 {
+ regulator-min-microvolt = <552000>;
+ regulator-max-microvolt = <832000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p2: ldo6 {
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1260000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p952: ldo7 {
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_0p904: ldo8 {
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <970000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_1p2: ldo9 {
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11b_1p504: ldo11 {
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_0p751: ldo12 {
+ regulator-min-microvolt = <751000>;
+ regulator-max-microvolt = <824000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_0p53: ldo13 {
+ regulator-min-microvolt = <530000>;
+ regulator-max-microvolt = <824000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_1p08: ldo14 {
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_0p765: ldo15 {
+ regulator-min-microvolt = <765000>;
+ regulator-max-microvolt = <1020000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b_1p1: ldo16 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_1p7: ldo17 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18b_1p8: ldo18 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l19b_1p8: ldo19 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8350c-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vreg_s1c_2p19: smps1 {
+ regulator-min-microvolt = <2190000>;
+ regulator-max-microvolt = <2210000>;
+ };
+
+ vreg_s2c_0p752: smps2 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <800000>;
+ };
+
+ vreg_s5c_0p752: smps5 {
+ regulator-min-microvolt = <465000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ vreg_s7c_0p752: smps7 {
+ regulator-min-microvolt = <465000>;
+ regulator-max-microvolt = <800000>;
+ };
+
+ vreg_s9c_1p084: smps9 {
+ regulator-min-microvolt = <1010000>;
+ regulator-max-microvolt = <1170000>;
+ };
+
+ vreg_l1c_1p8: ldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_1p62: ldo2 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_2p8: ldo3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3540000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c_1p62: ldo4 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5c_1p62: ldo5 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c_2p96: ldo6 {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c_3p0: ldo7 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c_1p62: ldo8 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c_2p96: ldo9 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <35440000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10c_0p88: ldo10 {
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_2p8: ldo11 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12c_1p65: ldo12 {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13c_2p7: ldo13 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob_3p296: bob {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ };
+ };
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <32 2>, <48 4>;
+};
+
+&uart5 {
+ compatible = "qcom,geni-debug-uart";
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vreg_l10c_0p88>;
+ vdda33-supply = <&vreg_l2b_3p072>;
+ vdda18-supply = <&vreg_l1c_1p8>;
+
+ status = "okay";
+};
+
+&usb_1_qmpphy {
+ vdda-phy-supply = <&vreg_l6b_1p2>;
+ vdda-pll-supply = <&vreg_l1b_0p912>;
+
+ status = "okay";
+};
+
+&wifi {
+ memory-region = <&wlan_fw_mem>;
+};
--
2.42.0
Powered by blists - more mailing lists