[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231117154037.67676-1-mstrozek@opensource.cirrus.com>
Date: Fri, 17 Nov 2023 15:40:37 +0000
From: Maciej Strozek <mstrozek@...nsource.cirrus.com>
To: Lee Jones <lee@...nel.org>
CC: <patches@...nsource.cirrus.com>, <linux-kernel@...r.kernel.org>,
"Maciej Strozek" <mstrozek@...nsource.cirrus.com>
Subject: [PATCH] mfd: wm831x: Remove redundant forever while loop
Current code excutes only once despite the while loop, so remove the
loop. Also msleep(1) will likely result in a larger sleep, so increase
its value for clarity while keeping the same behaviour.
Signed-off-by: Maciej Strozek <mstrozek@...nsource.cirrus.com>
---
drivers/mfd/wm831x-auxadc.c | 46 +++++++++++++++++--------------------
1 file changed, 21 insertions(+), 25 deletions(-)
diff --git a/drivers/mfd/wm831x-auxadc.c b/drivers/mfd/wm831x-auxadc.c
index 65b98f3fbd92..49f0ffd68d47 100644
--- a/drivers/mfd/wm831x-auxadc.c
+++ b/drivers/mfd/wm831x-auxadc.c
@@ -179,32 +179,28 @@ static int wm831x_auxadc_read_polled(struct wm831x *wm831x,
goto disable;
}
- /* If we're not using interrupts then poll the
- * interrupt status register */
- timeout = 5;
- while (timeout) {
- msleep(1);
-
- ret = wm831x_reg_read(wm831x,
- WM831X_INTERRUPT_STATUS_1);
- if (ret < 0) {
- dev_err(wm831x->dev,
- "ISR 1 read failed: %d\n", ret);
- goto disable;
- }
+ /* If we're not using interrupts then read the
+ * interrupt status register
+ */
+ msleep(20);
+ ret = wm831x_reg_read(wm831x,
+ WM831X_INTERRUPT_STATUS_1);
+ if (ret < 0) {
+ dev_err(wm831x->dev,
+ "ISR 1 read failed: %d\n", ret);
+ goto disable;
+ }
- /* Did it complete? */
- if (ret & WM831X_AUXADC_DATA_EINT) {
- wm831x_reg_write(wm831x,
- WM831X_INTERRUPT_STATUS_1,
- WM831X_AUXADC_DATA_EINT);
- break;
- } else {
- dev_err(wm831x->dev,
- "AUXADC conversion timeout\n");
- ret = -EBUSY;
- goto disable;
- }
+ /* Did it complete? */
+ if (ret & WM831X_AUXADC_DATA_EINT) {
+ wm831x_reg_write(wm831x,
+ WM831X_INTERRUPT_STATUS_1,
+ WM831X_AUXADC_DATA_EINT);
+ } else {
+ dev_err(wm831x->dev,
+ "AUXADC conversion timeout\n");
+ ret = -EBUSY;
+ goto disable;
}
ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
--
2.34.1
Powered by blists - more mailing lists