linux-kernel - [PATCH 1/2] arm64: dts: ti: k3-am65: Enable SDHCI nodes at the board level

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231117163339.89952-1-afd@ti.com>
Date:   Fri, 17 Nov 2023 10:33:38 -0600
From:   Andrew Davis <afd@...com>
To:     Nishanth Menon <nm@...com>, Vignesh Raghavendra <vigneshr@...com>,
        Tero Kristo <kristo@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>
CC:     <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        Andrew Davis <afd@...com>
Subject: [PATCH 1/2] arm64: dts: ti: k3-am65: Enable SDHCI nodes at the board level

SDHCI nodes defined in the top-level AM65 SoC dtsi files are incomplete
and will not be functional unless they are extended.

As the attached SD/eMMC is only known about at the board integration level,
these nodes should only be enabled when provided with this information.

Disable the SDHCI nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd@...com>
---
 arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi           | 1 +
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi                     | 2 ++
 arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi   | 5 -----
 arch/arm64/boot/dts/ti/k3-am654-base-board.dts               | 2 ++
 .../arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi | 1 +
 5 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index ba1c14a54acf4..79dbb286bafc1 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -554,6 +554,7 @@ &ecap0 {
 };
 
 &sdhci1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	ti,driver-strength-ohm = <50>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 5ebb87f467de5..9ff3094743f21 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -449,6 +449,7 @@ sdhci0: mmc@...0000 {
 		ti,otap-del-sel-hs400 = <0x0>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
+		status = "disabled";
 	};
 
 	sdhci1: mmc@...0000 {
@@ -471,6 +472,7 @@ sdhci1: mmc@...0000 {
 		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
+		status = "disabled";
 	};
 
 	scm_conf: scm-conf@...000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
index 5ab434c02ab6b..e4d7cba7c62f0 100644
--- a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
@@ -29,11 +29,6 @@ cpu-map {
 	/delete-node/ l2-cache1;
 };
 
-/* eMMC */
-&sdhci0 {
-	status = "disabled";
-};
-
 &main_pmx0 {
 	main_uart0_pins_default: main-uart0-default-pins {
 		pinctrl-single,pins = <
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 1637ec5ab5eda..822c288d27976 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -449,6 +449,7 @@ flash@0 {
 };
 
 &sdhci0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
 	bus-width = <8>;
@@ -463,6 +464,7 @@ &sdhci0 {
  * disable sdhci1
  */
 &sdhci1 {
+	status = "okay";
 	vmmc-supply = <&vdd_mmc1_sd>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
index be55494b1f3fc..a847209c3df52 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
@@ -43,6 +43,7 @@ AM65X_IOPAD(0x01b0, PIN_INPUT,          0)  /* (C25) MMC0_DS */
 
 /* eMMC */
 &sdhci0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
 	bus-width = <8>;
-- 
2.39.2