[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231118123205.266819-1-arinc.unal@arinc9.com>
Date: Sat, 18 Nov 2023 15:31:50 +0300
From: Arınç ÜNAL <arinc.unal@...nc9.com>
To: Arınç ÜNAL <arinc.unal@...nc9.com>,
Daniel Golle <daniel@...rotopia.org>,
Landen Chao <Landen.Chao@...iatek.com>,
DENG Qingfang <dqfext@...il.com>,
Sean Wang <sean.wang@...iatek.com>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
Russell King <linux@...linux.org.uk>
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
Frank Wunderlich <frank-w@...lic-files.de>,
Bartel Eerdekens <bartel.eerdekens@...stell8.be>,
mithat.guner@...ont.com, erkin.bozoglu@...ont.com
Subject: [PATCH net-next 00/15] MT7530 DSA subdriver improvements
Hello!
This patch series simplifies the MT7530 DSA subdriver and improves the
logic of the support for MT7530, MT7531, and the switch on the MT7988 SoC.
I have done a simple ping test to confirm basic communication on all switch
ports on the MCM and standalone MT7530 and MT7531 switch with this patch
series applied.
MT7621 Unielec, MCM MT7530:
rgmii-only-gmac0-mt7621-unielec-u7621-06-16m.dtb
gmac0-and-gmac1-mt7621-unielec-u7621-06-16m.dtb
tftpboot 0x80008000 mips-uzImage.bin; tftpboot 0x83000000 mips-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootm 0x80008000 0x83000000 0x83f00000
MT7622 Bananapi, MT7531:
gmac0-and-gmac1-mt7622-bananapi-bpi-r64.dtb
tftpboot 0x40000000 arm64-Image; tftpboot 0x45000000 arm64-rootfs.cpio.uboot; tftpboot 0x4a000000 $dtb; booti 0x40000000 0x45000000 0x4a000000
MT7623 Bananapi, standalone MT7530:
rgmii-only-gmac0-mt7623n-bananapi-bpi-r2.dtb
gmac0-and-gmac1-mt7623n-bananapi-bpi-r2.dtb
tftpboot 0x80008000 arm-zImage; tftpboot 0x83000000 arm-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootz 0x80008000 0x83000000 0x83f00000
This patch series is the continuation of the one linked below.
https://lore.kernel.org/netdev/20230522121532.86610-1-arinc.unal@arinc9.com/
Arınç
Arınç ÜNAL (15):
net: dsa: mt7530: always trap frames to active CPU port on MT7530
net: dsa: mt7530: use p5_interface_select as data type for p5_intf_sel
net: dsa: mt7530: store port 5 SGMII capability of MT7531
net: dsa: mt7530: improve comments regarding port 5 and 6
net: dsa: mt7530: improve code path for setting up port 5
net: dsa: mt7530: do not set priv->p5_interface on mt7530_setup_port5()
net: dsa: mt7530: do not run mt7530_setup_port5() if port 5 is disabled
net: dsa: mt7530: empty default case on mt7530_setup_port5()
net: dsa: mt7530: call port 6 setup from mt7530_mac_config()
net: dsa: mt7530: remove pad_setup function pointer
net: dsa: mt7530: move XTAL check to mt7530_setup()
net: dsa: mt7530: move enabling port 6 to mt7530_setup_port6()
net: dsa: mt7530: simplify mt7530_setup_port6() and change to void
net: dsa: mt7530: correct port capabilities of MT7988
net: dsa: mt7530: do not clear config->supported_interfaces
drivers/net/dsa/mt7530-mdio.c | 7 +-
drivers/net/dsa/mt7530.c | 283 ++++++++++++++++---------------------
drivers/net/dsa/mt7530.h | 19 +--
3 files changed, 137 insertions(+), 172 deletions(-)
Powered by blists - more mailing lists