linux-kernel - [PATCH 06/14] pinctrl: renesas: rzg2l: Add pin configuration support for pinmux groups

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20231120070024.4079344-7-claudiu.beznea.uj@bp.renesas.com>
Date:   Mon, 20 Nov 2023 09:00:16 +0200
From:   Claudiu <claudiu.beznea@...on.dev>
To:     s.shtylyov@....ru, davem@...emloft.net, edumazet@...gle.com,
        kuba@...nel.org, pabeni@...hat.com, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
        linux@...linux.org.uk, geert+renesas@...der.be,
        magnus.damm@...il.com, mturquette@...libre.com, sboyd@...nel.org,
        linus.walleij@...aro.org, p.zabel@...gutronix.de, arnd@...db.de,
        m.szyprowski@...sung.com, alexandre.torgue@...s.st.com, afd@...com,
        broonie@...nel.org, alexander.stein@...tq-group.com,
        eugen.hristev@...labora.com, sergei.shtylyov@...il.com,
        prabhakar.mahadev-lad.rj@...renesas.com, biju.das.jz@...renesas.com
Cc:     linux-renesas-soc@...r.kernel.org, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-clk@...r.kernel.org,
        linux-gpio@...r.kernel.org, claudiu.beznea@...on.dev,
        Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Subject: [PATCH 06/14] pinctrl: renesas: rzg2l: Add pin configuration support for pinmux groups

From: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>

On RZ/G3S different Ethernet pins needs to be configured with different
settings (e.g. power-source need to be set, RGMII TXC, TX_CTL pins need
output-enable). Commit adjust driver to allow specifying pin configuration
for pinmux groups. With this DT settings like the following are taken
into account by driver:

eth0_pins: eth0 {
	tx_ctl {
		pinmux = <RZG2L_PORT_PINMUX(1, 1, 1)>;  /* ET0_TX_CTL */
		power-source = <1800>;
		output-enable;
		drive-strength-microamp = <5200>;
	};
};

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
---
 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 21ee628363fa..819698dacef0 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -376,8 +376,11 @@ static int rzg2l_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 		goto done;
 	}
 
-	if (num_pinmux)
+	if (num_pinmux) {
 		nmaps += 1;
+		if (num_configs)
+			nmaps += 1;
+	}
 
 	if (num_pins)
 		nmaps += num_pins;
@@ -462,6 +465,16 @@ static int rzg2l_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 	maps[idx].data.mux.function = name;
 	idx++;
 
+	if (num_configs) {
+		ret = rzg2l_map_add_config(&maps[idx], name,
+					   PIN_MAP_TYPE_CONFIGS_GROUP,
+					   configs, num_configs);
+		if (ret < 0)
+			goto remove_group;
+
+		idx++;
+	};
+
 	dev_dbg(pctrl->dev, "Parsed %pOF with %d pins\n", np, num_pinmux);
 	ret = 0;
 	goto done;
-- 
2.39.2