[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231120084606.4083194-4-claudiu.beznea.uj@bp.renesas.com>
Date: Mon, 20 Nov 2023 10:45:56 +0200
From: Claudiu <claudiu.beznea@...on.dev>
To: s.shtylyov@....ru, davem@...emloft.net, edumazet@...gle.com,
kuba@...nel.org, pabeni@...hat.com, p.zabel@...gutronix.de,
yoshihiro.shimoda.uh@...esas.com, geert+renesas@...der.be,
wsa+renesas@...g-engineering.com, biju.das.jz@...renesas.com,
prabhakar.mahadev-lad.rj@...renesas.com,
sergei.shtylyov@...entembedded.com,
mitsuhiro.kimura.kc@...esas.com, masaru.nagai.vx@...esas.com
Cc: netdev@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
linux-kernel@...r.kernel.org,
Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Subject: [PATCH 03/13] net: ravb: Make write access to CXR35 first before accessing other EMAC registers
From: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Hardware manual of RZ/G3S (and RZ/G2L) specifies the following on the
description of CXR35 register (chapter "PHY interface select register
(CXR35)"): "After release reset, make write-access to this register before
making write-access to other registers (except MDIOMOD). Even if not need
to change the value of this register, make write-access to this register
at least one time. Because RGMII/MII MODE is recognized by accessing this
register".
The setup procedure for EMAC module (chapter "Setup procedure" of RZ/G3S,
RZ/G2L manuals) specifies the E-MAC.CXR35 register is the first EMAC
register that is to be configured.
Note [A] from chapter "PHY interface select register (CXR35)" specifies
the following:
[A] The case which CXR35 SEL_XMII is used for the selection of RGMII/MII
in APB Clock 100 MHz.
(1) To use RGMII interface, Set ‘H’03E8_0000’ to this register.
(2) To use MII interface, Set ‘H’03E8_0002’ to this register.
Take into account these indication.
Fixes: 1089877ada8d ("ravb: Add RZ/G2L MII interface support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
---
drivers/net/ethernet/renesas/ravb_main.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 0486add302b3..d798a7109a09 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -515,6 +515,15 @@ static void ravb_emac_init_gbeth(struct net_device *ndev)
{
struct ravb_private *priv = netdev_priv(ndev);
+ if (priv->phy_interface == PHY_INTERFACE_MODE_MII) {
+ ravb_write(ndev, (1000 << 16) | CXR35_SEL_XMII_MII, CXR35);
+ ravb_modify(ndev, CXR31, CXR31_SEL_LINK0 | CXR31_SEL_LINK1, 0);
+ } else {
+ ravb_write(ndev, (1000 << 16) | CXR35_SEL_XMII_RGMII, CXR35);
+ ravb_modify(ndev, CXR31, CXR31_SEL_LINK0 | CXR31_SEL_LINK1,
+ CXR31_SEL_LINK0);
+ }
+
/* Receive frame limit set register */
ravb_write(ndev, GBETH_RX_BUFF_MAX + ETH_FCS_LEN, RFLR);
@@ -537,14 +546,6 @@ static void ravb_emac_init_gbeth(struct net_device *ndev)
/* E-MAC interrupt enable register */
ravb_write(ndev, ECSIPR_ICDIP, ECSIPR);
-
- if (priv->phy_interface == PHY_INTERFACE_MODE_MII) {
- ravb_modify(ndev, CXR31, CXR31_SEL_LINK0 | CXR31_SEL_LINK1, 0);
- ravb_write(ndev, (1000 << 16) | CXR35_SEL_XMII_MII, CXR35);
- } else {
- ravb_modify(ndev, CXR31, CXR31_SEL_LINK0 | CXR31_SEL_LINK1,
- CXR31_SEL_LINK0);
- }
}
static void ravb_emac_init_rcar(struct net_device *ndev)
--
2.39.2
Powered by blists - more mailing lists