| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 20 Nov 2023 10:04:10 +0100
From: Neil Armstrong <neil.armstrong@...aro.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org
Cc: Andrew Davis <afd@...com>, Arnd Bergmann <arnd@...db.de>,
Bjorn Andersson <andersson@...nel.org>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Heiko Stuebner <heiko@...ech.de>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Michal Simek <michal.simek@....com>,
Nishanth Menon <nm@...com>, Olof Johansson <olof@...om.net>,
linux-rockchip@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org,
linux-amlogic@...ts.infradead.org, linux-arm-msm@...r.kernel.org
Subject: Re: [PATCH v2] docs: dt-bindings: add DTS Coding Style document
On 20/11/2023 09:40, Krzysztof Kozlowski wrote:
> Document preferred coding style for Devicetree sources (DTS and DTSI),
> to bring consistency among all (sub)architectures and ease in reviews.
>
> Cc: Andrew Davis <afd@...com>
> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
> Cc: Arnd Bergmann <arnd@...db.de>
> Cc: Bjorn Andersson <andersson@...nel.org>
> Cc: Geert Uytterhoeven <geert+renesas@...der.be>
> Cc: Heiko Stuebner <heiko@...ech.de>
> Cc: Konrad Dybcio <konrad.dybcio@...aro.org>
> Cc: Matthias Brugger <matthias.bgg@...il.com>
> Cc: Michal Simek <michal.simek@....com>
> Cc: Neil Armstrong <neil.armstrong@...aro.org>
> Cc: Nishanth Menon <nm@...com>
> Cc: Olof Johansson <olof@...om.net>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
>
> ---
>
> Merging idea: Rob/DT bindings
>
> Changes in v2
> =============
> 1. Hopefully incorporate entire feedback from comments:
> a. Fix \ { => / { (Rob)
> b. Name: dts-coding-style (Rob)
> c. Exceptions for ordering nodes by name for Renesas and pinctrl (Geert,
> Konrad)
> d. Ordering properties by common/vendor (Rob)
> e. Array entries in <> (Rob)
>
> 2. New chapter: Organizing DTSI and DTS
>
> 3. Several grammar fixes (missing articles)
>
> Cc: linux-rockchip@...ts.infradead.org
> Cc: linux-mediatek@...ts.infradead.org
> Cc: linux-samsung-soc@...r.kernel.org
> Cc: linux-amlogic@...ts.infradead.org
> Cc: linux-arm-kernel@...ts.infradead.org
> Cc: linux-arm-msm@...r.kernel.org
> ---
> .../devicetree/bindings/dts-coding-style.rst | 163 ++++++++++++++++++
> Documentation/devicetree/bindings/index.rst | 1 +
> 2 files changed, 164 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/dts-coding-style.rst
>
> diff --git a/Documentation/devicetree/bindings/dts-coding-style.rst b/Documentation/devicetree/bindings/dts-coding-style.rst
> new file mode 100644
> index 000000000000..cc7e3b4d1b92
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dts-coding-style.rst
> @@ -0,0 +1,163 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +.. _dtscodingstyle:
> +
> +=====================================
> +Devicetree Sources (DTS) Coding Style
> +=====================================
> +
> +When writing Devicetree Sources (DTS) please observe below guidelines. They
> +should be considered complementary to any rules expressed already in Devicetree
> +Specification and dtc compiler (including W=1 and W=2 builds).
> +
> +Individual architectures and sub-architectures can add additional rules, making
> +the style stricter.
> +
> +Naming and Valid Characters
> +---------------------------
> +
> +1. Node and property names are allowed to use only:
> +
> + * lowercase characters: [a-z]
> + * digits: [0-9]
> + * dash: -
> +
> +2. Labels are allowed to use only:
> +
> + * lowercase characters: [a-z]
> + * digits: [0-9]
> + * underscore: _
> +
> +3. Unit addresses should use lowercase hex, without leading zeros (padding).
> +
> +4. Hex values in properties, e.g. "reg", should use lowercase hex. The address
> + part can be padded with leading zeros.
> +
> +Example::
> +
> + gpi_dma2: dma-controller@...000 {
> + compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
> + reg = <0x0 0x00800000 0x0 0x60000>;
> + }
> +
> +Order of Nodes
> +--------------
> +
> +1. Nodes within any bus, thus using unit addresses for children, shall be
> + ordered incrementally by unit address.
> + Alternatively for some sub-architectures, nodes of the same type can be
> + grouped together (e.g. all I2C controllers one after another even if this
> + breaks unit address ordering).
> +
> +2. Nodes without unit addresses should be ordered alpha-numerically by the node
> + name. For a few types of nodes, they can be ordered by the main property
> + (e.g. pin configuration states ordered by value of "pins" property).
> +
> +3. When extending nodes in the board DTS via &label, the entries should be
> + ordered alpha-numerically.
> +
> +Example::
> +
> + // SoC DTSI
> +
> + / {
> + cpus {
> + // ...
> + };
> +
> + psci {
> + // ...
> + };
> +
> + soc@ {
> + dma: dma-controller@...00 {
> + // ...
> + };
> +
> + clk: clock-controller@...00 {
> + // ...
> + };
> + };
> + };
> +
> + // Board DTS
> +
> + &clk {
> + // ...
> + };
> +
> + &dma {
> + // ...
> + };
> +
> +
> +Order of Properties in Device Node
> +----------------------------------
> +
> +Following order of properties in device nodes is preferred:
> +
> +1. compatible
> +2. reg
> +3. ranges
> +4. Standard/common properties (defined by common bindings, e.g. without
> + vendor-prefixes)
> +5. Vendor-specific properties
> +6. status (if applicable)
> +7. Child nodes, where each node is preceded with a blank line
> +
> +The "status" property is by default "okay", thus it can be omitted.
> +
> +Example::
> +
> + // SoC DTSI
> +
> + usb_1_hsphy: phy@...3000 {
> + compatible = "qcom,sm8550-snps-eusb2-phy";
> + reg = <0x0 0x088e3000 0x0 0x154>;
> + #phy-cells = <0>;
> + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> + status = "disabled";
> + };
> +
> + // Board DTS
> +
> + &usb_1_hsphy {
> + clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
> + clock-names = "ref";
> + status = "okay";
> + };
> +
> +
> +Indentation
> +-----------
> +
> +1. Use indentation according to :ref:`codingstyle`.
> +2. For arrays spanning across lines, it is preferred to align the continued
> + entries with opening < from the first line.
> +3. Each entry in arrays with multiple cells (e.g. "reg" with two IO addresses)
> + should be enclosed in <>.
> +
> +Example::
> +
> + thermal-sensor@...1000 {
> + compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
> + reg = <0x0 0x0c271000 0x0 0x1000>,
> + <0x0 0x0c222000 0x0 0x1000>;
> + };
> +
> +Organizing DTSI and DTS
> +-----------------------
> +
> +The DTSI and DTS files should be organized in a way representing the common
> +(and re-usable) parts of the hardware. Typically this means organizing DTSI
> +and DTS files into several files:
> +
> +1. DTSI with contents of the entire SoC (without nodes for hardware not present
> + on the SoC).
> +2. If applicable: DTSI with common or re-usable parts of the hardware (e.g.
> + entire System-on-Module).
> +3. DTS representing the board.
> +
> +Hardware components which are present on the board should be placed in the
> +board DTS, not in the SoC or SoM DTSI. A partial exception is a common
> +external reference SoC-input clock, which could be coded as a fixed-clock in
> +the SoC DTSI with its frequency provided by each board DTS.
> diff --git a/Documentation/devicetree/bindings/index.rst b/Documentation/devicetree/bindings/index.rst
> index d9002a3a0abb..cc1fbdc05657 100644
> --- a/Documentation/devicetree/bindings/index.rst
> +++ b/Documentation/devicetree/bindings/index.rst
> @@ -4,6 +4,7 @@
> :maxdepth: 1
>
> ABI
> + dts-coding-style
> writing-bindings
> writing-schema
> submitting-patches
Please add my:
Acked-by: Neil Armstrong <neil.armstrong@...aro.org>
I agree with everything in this document and it's a huge step in the right direction.
Thanks,
Neil
Powered by blists - more mailing lists