[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231120111820.87398-6-claudiu.beznea.uj@bp.renesas.com>
Date: Mon, 20 Nov 2023 13:18:16 +0200
From: Claudiu <claudiu.beznea@...on.dev>
To: tglx@...utronix.de, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
geert+renesas@...der.be, magnus.damm@...il.com,
mturquette@...libre.com, sboyd@...nel.org,
prabhakar.mahadev-lad.rj@...renesas.com
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-renesas-soc@...r.kernel.org, linux-clk@...r.kernel.org,
Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Subject: [PATCH v3 5/9] irqchip/renesas-rzg2l: Implement restriction when writing ISCR register
From: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
The RZ/G2L manual (chapter "IRQ Status Control Register (ISCR)") describes
the operation to clear interrupts through the ISCR register as follows:
[Write operation]
When "Falling-edge detection", "Rising-edge detection" or
"Falling/Rising-edge detection" is set in IITSR:
- In case ISTAT is 1
0: IRQn interrupt detection status is cleared.
1: Invalid to write.
- In case ISTAT is 0
Invalid to write.
When “Low-level detection” is set in IITSR.:
Invalid to write.
Take the interrupt type into account when clearing interrupts through
the ISCR register to avoid writing the ISCR when interrupt type is
level.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
---
drivers/irqchip/irq-renesas-rzg2l.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/irqchip/irq-renesas-rzg2l.c b/drivers/irqchip/irq-renesas-rzg2l.c
index d666912adc74..a77ac6e1606f 100644
--- a/drivers/irqchip/irq-renesas-rzg2l.c
+++ b/drivers/irqchip/irq-renesas-rzg2l.c
@@ -78,11 +78,17 @@ static void rzg2l_irq_eoi(struct irq_data *d)
unsigned int hw_irq = irqd_to_hwirq(d) - IRQC_IRQ_START;
struct rzg2l_irqc_priv *priv = irq_data_to_priv(d);
u32 bit = BIT(hw_irq);
- u32 reg;
+ u32 iitsr, iscr;
- reg = readl_relaxed(priv->base + ISCR);
- if (reg & bit)
- writel_relaxed(reg & ~bit, priv->base + ISCR);
+ iscr = readl_relaxed(priv->base + ISCR);
+ iitsr = readl_relaxed(priv->base + IITSR);
+
+ /*
+ * ISCR can only be cleared if the type is falling-edge, rising-edge or
+ * falling/rising-edge.
+ */
+ if ((iscr & bit) && (iitsr & IITSR_IITSEL_MASK(hw_irq)))
+ writel_relaxed(iscr & ~bit, priv->base + ISCR);
}
static void rzg2l_tint_eoi(struct irq_data *d)
--
2.39.2
Powered by blists - more mailing lists