| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20231120135041.15259-9-ansuelsmth@gmail.com>
Date: Mon, 20 Nov 2023 14:50:35 +0100
From: Christian Marangi <ansuelsmth@...il.com>
To: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Florian Fainelli <florian.fainelli@...adcom.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@...adcom.com>,
Daniel Golle <daniel@...rotopia.org>,
Qingfang Deng <dqfext@...il.com>,
SkyLake Huang <SkyLake.Huang@...iatek.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
David Epping <david.epping@...singlinkelectronics.com>,
Vladimir Oltean <olteanv@...il.com>,
Christian Marangi <ansuelsmth@...il.com>,
"Russell King (Oracle)" <rmk+kernel@...linux.org.uk>,
Harini Katakam <harini.katakam@....com>,
Simon Horman <horms@...nel.org>,
Robert Marko <robert.marko@...tura.hr>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org
Subject: [net-next RFC PATCH 08/14] net: phy: add support for PHY package interface mode
Some PHY in PHY package supports running only at a specific mode for
each PHY in the package. Add support for enforcing this special thing a
verify consistency with the requested mode to prevent misconfiguration.
To set the PHY package mode, simply set "phy-mode" in the phy-package
node. Each PHY on init will verify if the requested mode match the one
set for the PHY package and will return -EINVAL if this is not true.
If PHY package doesn't specify any mode, it's assumed that PHY in the
package doesn't have such limitation.
Signed-off-by: Christian Marangi <ansuelsmth@...il.com>
---
drivers/net/phy/phy_device.c | 37 ++++++++++++++++++++++++++++++++++++
include/linux/phy.h | 6 ++++++
2 files changed, 43 insertions(+)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 0b7ba6995929..73af4197a7af 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -25,6 +25,7 @@
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_net.h>
#include <linux/netdevice.h>
#include <linux/phy.h>
#include <linux/phylib_stubs.h>
@@ -1225,8 +1226,17 @@ static int phy_poll_reset(struct phy_device *phydev)
int phy_init_hw(struct phy_device *phydev)
{
+ phy_interface_t package_interface;
int ret = 0;
+ /* Validate we are requesting consistent mode if we
+ * are in a PHY package and the PHY package requires a
+ * specific mode.
+ */
+ ret = phy_package_get_mode(phydev, &package_interface);
+ if (!ret && phydev->interface != package_interface)
+ return -EINVAL;
+
/* Deassert the reset signal */
phy_device_reset(phydev, 0);
@@ -1776,6 +1786,32 @@ void phy_package_leave(struct phy_device *phydev)
}
EXPORT_SYMBOL_GPL(phy_package_leave);
+/**
+ * phy_package_get_mode - get PHY interface mode for PHY package
+ * @phydev: target phy_device struct
+ * @interface: phy_interface_t pointer where to save the PHY package mode
+ *
+ * Gets PHY interface mode for the shared data of the PHY package.
+ * Returns 0 and updates @interface with the PHY package value, or -ENODEV
+ * if PHY is not in PHY package or -EINVAL if a PHY package interface mode
+ * is not set.
+ */
+int phy_package_get_mode(struct phy_device *phydev, phy_interface_t *interface)
+{
+ struct phy_package_shared *shared = phydev->shared;
+
+ if (!shared)
+ return -ENODEV;
+
+ if (shared->package_interface == PHY_INTERFACE_MODE_NA)
+ return -EINVAL;
+
+ *interface = shared->package_interface;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(phy_package_get_mode);
+
static void devm_phy_package_leave(struct device *dev, void *res)
{
phy_package_leave(*(struct phy_device **)res);
@@ -3270,6 +3306,7 @@ static int of_phy_package(struct phy_device *phydev)
goto exit;
phydev->shared->np = package_node;
+ of_get_phy_mode(package_node, &phydev->shared->package_interface);
exit:
kfree(global_phy_addrs);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 1849fc637196..8af0a8a72b88 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -341,6 +341,11 @@ struct mdio_bus_stats {
struct phy_package_shared {
/* With PHY package defined in DT this points to the PHY package node */
struct device_node *np;
+ /* PHY package interface
+ * If defined, each PHY of the package MUST have the interface
+ * set to the PHY package.
+ */
+ phy_interface_t package_interface;
/* addrs list pointer */
/* note that this pointer is shared between different phydevs.
* It is allocated and freed automatically by phy_package_join() and
@@ -2014,6 +2019,7 @@ int phy_ethtool_nway_reset(struct net_device *ndev);
int phy_package_join(struct phy_device *phydev, int *addrs, size_t addrs_num,
size_t priv_size);
void phy_package_leave(struct phy_device *phydev);
+int phy_package_get_mode(struct phy_device *phydev, phy_interface_t *interface);
int devm_phy_package_join(struct device *dev, struct phy_device *phydev,
int *addrs, size_t addrs_num, size_t priv_size);
--
2.40.1
Powered by blists - more mailing lists