linux-kernel - RE: [PATCH v1 1/1] mmc: sdhci-of-dwcmshc: Enable timeout quirk for BlueField-3 SoC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <BN9PR12MB50688354602B03E9E637C02FD3B4A@BN9PR12MB5068.namprd12.prod.outlook.com>
Date:   Mon, 20 Nov 2023 15:18:10 +0000
From:   Liming Sun <limings@...dia.com>
To:     Adrian Hunter <adrian.hunter@...el.com>,
        Ulf Hansson <ulf.hansson@...aro.org>,
        David Thompson <davthompson@...dia.com>
CC:     "linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH v1 1/1] mmc: sdhci-of-dwcmshc: Enable timeout quirk for
 BlueField-3 SoC



> -----Original Message-----
> From: Adrian Hunter <adrian.hunter@...el.com>
> Sent: Monday, November 20, 2023 1:49 AM
> To: Liming Sun <limings@...dia.com>; Ulf Hansson <ulf.hansson@...aro.org>;
> David Thompson <davthompson@...dia.com>
> Cc: linux-mmc@...r.kernel.org; linux-kernel@...r.kernel.org
> Subject: Re: [PATCH v1 1/1] mmc: sdhci-of-dwcmshc: Enable timeout quirk for
> BlueField-3 SoC
> 
> On 18/11/23 15:46, Liming Sun wrote:
> > This commit enables SDHCI_QUIRK_BROKEN_TIMEOUT_VAL to solve the
> > intermittent eMMC timeout issue reported on some cards under eMMC
> > stress test.
> >
> > Reported error message:
> >   dwcmshc MLNXBF30:00: __mmc_blk_ioctl_cmd: data error -110
> 
> Were you able to determine the root cause?  For example,
> is the host controller timeout correct, is the eMMC
> providing correct timeout values, is the mmc subsystem
> calculating a correct value, is sdhci programming a correct
> value?
> 
> If there are problems outside the host controller then we
> need to address them also.

It is caused by the host controller timeout, but is hard to tell whether the
configuration provided by the card is good enough since it's
intermittent under stress test the SoC needs to work with different eMMC vendors. 
In UEFI eMMC driver similar max timeout (0xe) is used to avoid such
issue. This commit tries to use existing quirk, which I think that it would work 
if there is another way to adjust the TOUT_CNT register. Any concern or suggestions?

> 
> >
> > Signed-off-by: Liming Sun <limings@...dia.com>
> 
> Fixes tag?

Will update it in v2.

> 
> > ---
> >  drivers/mmc/host/sdhci-of-dwcmshc.c | 3 ++-
> >  1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c
> b/drivers/mmc/host/sdhci-of-dwcmshc.c
> > index 3a3bae6948a8..3c8fe8aec558 100644
> > --- a/drivers/mmc/host/sdhci-of-dwcmshc.c
> > +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
> > @@ -365,7 +365,8 @@ static const struct sdhci_pltfm_data
> sdhci_dwcmshc_pdata = {
> >  #ifdef CONFIG_ACPI
> >  static const struct sdhci_pltfm_data sdhci_dwcmshc_bf3_pdata = {
> >  	.ops = &sdhci_dwcmshc_ops,
> > -	.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
> > +	.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
> > +		  SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
> >  	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
> >  		   SDHCI_QUIRK2_ACMD23_BROKEN,
> >  };