linux-kernel - [PATCH 2/3] USB: dwc3: qcom: fix wakeup after probe deferral

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231120161607.7405-3-johan+linaro@kernel.org>
Date:   Mon, 20 Nov 2023 17:16:06 +0100
From:   Johan Hovold <johan+linaro@...nel.org>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Thinh Nguyen <Thinh.Nguyen@...opsys.com>,
        Wesley Cheng <quic_wcheng@...cinc.com>,
        Krishna Kurapati PSSNV <quic_kriskura@...cinc.com>,
        linux-arm-msm@...r.kernel.org, linux-usb@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Johan Hovold <johan+linaro@...nel.org>, stable@...r.kernel.org
Subject: [PATCH 2/3] USB: dwc3: qcom: fix wakeup after probe deferral

The Qualcomm glue driver is overriding the interrupt trigger types
defined by firmware when requesting the wakeup interrupts during probe.

This can lead to a failure to map the DP/DM wakeup interrupts after a
probe deferral as the firmware defined trigger types do not match the
type used for the initial mapping:

	irq: type mismatch, failed to map hwirq-14 for interrupt-controller@...0000!
	irq: type mismatch, failed to map hwirq-15 for interrupt-controller@...0000!

Fix this by not overriding the firmware provided trigger types when
requesting the wakeup interrupts.

Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Cc: stable@...r.kernel.org      # 4.18
Signed-off-by: Johan Hovold <johan+linaro@...nel.org>
---
 drivers/usb/dwc3/dwc3-qcom.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 10fb481d943b..82544374110b 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -549,7 +549,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
 		irq_set_status_flags(irq, IRQ_NOAUTOEN);
 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 					qcom_dwc3_resume_irq,
-					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+					IRQF_ONESHOT,
 					"qcom_dwc3 HS", qcom);
 		if (ret) {
 			dev_err(qcom->dev, "hs_phy_irq failed: %d\n", ret);
@@ -564,7 +564,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
 		irq_set_status_flags(irq, IRQ_NOAUTOEN);
 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 					qcom_dwc3_resume_irq,
-					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+					IRQF_ONESHOT,
 					"qcom_dwc3 DP_HS", qcom);
 		if (ret) {
 			dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret);
@@ -579,7 +579,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
 		irq_set_status_flags(irq, IRQ_NOAUTOEN);
 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 					qcom_dwc3_resume_irq,
-					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+					IRQF_ONESHOT,
 					"qcom_dwc3 DM_HS", qcom);
 		if (ret) {
 			dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret);
@@ -594,7 +594,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
 		irq_set_status_flags(irq, IRQ_NOAUTOEN);
 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 					qcom_dwc3_resume_irq,
-					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+					IRQF_ONESHOT,
 					"qcom_dwc3 SS", qcom);
 		if (ret) {
 			dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret);
-- 
2.41.0