lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231120-j7200-usb-suspend-v2-0-038c7e4a3df4@bootlin.com>
Date:   Mon, 20 Nov 2023 18:06:00 +0100
From:   Théo Lebrun <theo.lebrun@...tlin.com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Roger Quadros <rogerq@...nel.org>,
        Peter Chen <peter.chen@...nel.org>,
        Pawel Laszczak <pawell@...ence.com>,
        Nishanth Menon <nm@...com>,
        Vignesh Raghavendra <vigneshr@...com>,
        Tero Kristo <kristo@...nel.org>
Cc:     linux-usb@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        "Thomas Petazzoni thomas.petazzoni"@bootlin.com,
        Grégory Clement <gregory.clement@...tlin.com>,
        Théo Lebrun <theo.lebrun@...tlin.com>,
        Conor Dooley <conor.dooley@...rochip.com>
Subject: [PATCH v2 0/7] usb: cdns: fix suspend on J7200 by assuming
 reset-on-resume

Hi,

Suspend on the TI J7200 platform is broken currently. There are two
components that need to be patched so that they assume reset on
resume: (1) the TI wrapper cdns3-ti & (2) the HOST role of the
controller.

About (1): the TI wrapper only did its hardware configuration at probe
time. Update so that it is done at resume on J7200 SoC.

About (2): signal from cdns3-ti to cdns3 host to xHCI that the
controller resets on resume. This way we avoid the following warning:

   xhci-hcd xhci-hcd.1.auto: xHC error in resume, USBSTS 0x401, Reinit

Strictly speaking (2) is not required to have working suspend on J7200;
its only goal is to silence this warning.

Those patches have been tested on the TI J7200 EVM GP. No need to
mention that other patches are required for S2R to work, but those will
be sent later down the road. Those USB patches are rather standalone.

Thanks,
Théo

--
Théo Lebrun, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Signed-off-by: Théo Lebrun <theo.lebrun@...tlin.com>
---
Changes in v2:
- Remove runtime PM from cdns3-ti; it brings nothing. That means our
  cdns3-ti suspend/resume patch is simpler; there is no need to handle
  runtime PM at suspend/resume.
- Do not add cdns3 host role suspend/resume callbacks; they are not
  needed as core detects reset on resume & calls cdns_drd_host_on when
  needed.
- cdns3-ti: Move usb2_refclk_rate_code assignment closer to the value
  computation.
- cdns3/host.c: do not pass XHCI_SUSPEND_RESUME_CLKS quirk to xHCI; it
  is unneeded on our platform.
- Link to v1: https://lore.kernel.org/r/20231113-j7200-usb-suspend-v1-0-ad1ee714835c@bootlin.com

---
Théo Lebrun (7):
      dt-bindings: usb: ti,j721e-usb: add ti,j7200-usb compatible
      usb: cdns3-ti: remove runtime PM
      usb: cdns3-ti: move reg writes from probe into an init_hw helper
      usb: cdns3-ti: add suspend/resume procedures for J7200
      usb: cdns3: add quirk to platform data for reset-on-resume
      usb: cdns3-ti: signal reset-on-resume to xHCI for J7200 platform
      arm64: dts: ti: k3-j7200: use J7200-specific USB compatible

 .../devicetree/bindings/usb/ti,j721e-usb.yaml      |   4 +
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi          |   2 +-
 drivers/usb/cdns3/cdns3-ti.c                       | 134 +++++++++++++--------
 drivers/usb/cdns3/core.h                           |   1 +
 drivers/usb/cdns3/host.c                           |   3 +
 5 files changed, 90 insertions(+), 54 deletions(-)
---
base-commit: 1d42d5c8f1ca11106579dcaadef4161fee03419e
change-id: 20231113-j7200-usb-suspend-2a47f2281e04

Best regards,
-- 
Théo Lebrun <theo.lebrun@...tlin.com>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ