[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231121070619.9836-3-saeed@kernel.org>
Date: Mon, 20 Nov 2023 23:06:16 -0800
From: Saeed Mahameed <saeed@...nel.org>
To: Arnd Bergmann <arnd@...db.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: Jason Gunthorpe <jgg@...dia.com>,
Leon Romanovsky <leonro@...dia.com>,
Jiri Pirko <jiri@...dia.com>, Leonid Bloch <lbloch@...dia.com>,
Itay Avraham <itayavr@...dia.com>,
Jakub Kicinski <kuba@...nel.org>, linux-kernel@...r.kernel.org,
Saeed Mahameed <saeedm@...dia.com>
Subject: [PATCH V3 2/5] misc: mlx5ctl: Add mlx5ctl misc driver
From: Saeed Mahameed <saeedm@...dia.com>
The ConnectX HW family supported by the mlx5 drivers uses an architecture
where a FW component executes "mailbox RPCs" issued by the driver to make
changes to the device. This results in a complex debugging environment
where the FW component has information and low level configuration that
needs to be accessed to userspace for debugging purposes.
Historically a userspace program was used that accessed the PCI register
and config space directly through /sys/bus/pci/.../XXX and could operate
these debugging interfaces in parallel with the running driver.
This approach is incompatible with secure boot and kernel lockdown so this
driver provides a secure and restricted interface to that same data.
On open the driver would allocate a special FW UID (user context ID)
restrected to debug RPCs only, later in this series all user RPCs will
be stamped with this UID.
Reviewed-by: Jiri Pirko <jiri@...dia.com>
Reviewed-by: Leon Romanovsky <leonro@...dia.com>
Signed-off-by: Saeed Mahameed <saeedm@...dia.com>
---
MAINTAINERS | 8 +
drivers/misc/Kconfig | 1 +
drivers/misc/Makefile | 1 +
drivers/misc/mlx5ctl/Kconfig | 14 ++
drivers/misc/mlx5ctl/Makefile | 4 +
drivers/misc/mlx5ctl/main.c | 314 ++++++++++++++++++++++++++++++++++
6 files changed, 342 insertions(+)
create mode 100644 drivers/misc/mlx5ctl/Kconfig
create mode 100644 drivers/misc/mlx5ctl/Makefile
create mode 100644 drivers/misc/mlx5ctl/main.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 97f51d5ec1cf..4b532df16b19 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13835,6 +13835,14 @@ L: virtualization@...ts.linux-foundation.org
S: Supported
F: drivers/vdpa/mlx5/
+MELLANOX MLX5 ConnectX Diag DRIVER
+M: Saeed Mahameed <saeedm@...dia.com>
+R: Itay Avraham <itayavr@...dia.com>
+L: linux-kernel@...r.kernel.org
+S: Supported
+F: drivers/misc/mlx5ctl/
+F: include/uapi/misc/mlx5ctl.h
+
MELLANOX MLXCPLD I2C AND MUX DRIVER
M: Vadim Pasternak <vadimp@...dia.com>
M: Michael Shych <michaelsh@...dia.com>
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index f37c4b8380ae..c0e4823648ed 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -579,4 +579,5 @@ source "drivers/misc/cardreader/Kconfig"
source "drivers/misc/uacce/Kconfig"
source "drivers/misc/pvpanic/Kconfig"
source "drivers/misc/mchp_pci1xxxx/Kconfig"
+source "drivers/misc/mlx5ctl/Kconfig"
endmenu
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index f2a4d1ff65d4..49bc4697f498 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -67,3 +67,4 @@ obj-$(CONFIG_TMR_MANAGER) += xilinx_tmr_manager.o
obj-$(CONFIG_TMR_INJECT) += xilinx_tmr_inject.o
obj-$(CONFIG_TPS6594_ESM) += tps6594-esm.o
obj-$(CONFIG_TPS6594_PFSM) += tps6594-pfsm.o
+obj-$(CONFIG_MLX5CTL) += mlx5ctl/
diff --git a/drivers/misc/mlx5ctl/Kconfig b/drivers/misc/mlx5ctl/Kconfig
new file mode 100644
index 000000000000..faaa1dba2cc2
--- /dev/null
+++ b/drivers/misc/mlx5ctl/Kconfig
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+
+config MLX5CTL
+ tristate "mlx5 ConnectX control misc driver"
+ depends on MLX5_CORE
+ help
+ MLX5CTL provides interface for the user process to access the debug and
+ configuration registers of the ConnectX hardware family
+ (NICs, PCI switches and SmartNIC SoCs).
+ This will allow configuration and debug tools to work out of the box on
+ mainstream kernel.
+
+ If you don't know what to do here, say N.
diff --git a/drivers/misc/mlx5ctl/Makefile b/drivers/misc/mlx5ctl/Makefile
new file mode 100644
index 000000000000..b5c7f99e0ab6
--- /dev/null
+++ b/drivers/misc/mlx5ctl/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_MLX5CTL) += mlx5ctl.o
+mlx5ctl-y := main.o
diff --git a/drivers/misc/mlx5ctl/main.c b/drivers/misc/mlx5ctl/main.c
new file mode 100644
index 000000000000..8eb150461b80
--- /dev/null
+++ b/drivers/misc/mlx5ctl/main.c
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+/* Copyright (c) 2023, NVIDIA CORPORATION & AFFILIATES. All rights reserved. */
+
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/auxiliary_bus.h>
+#include <linux/mlx5/device.h>
+#include <linux/mlx5/driver.h>
+#include <linux/atomic.h>
+#include <linux/refcount.h>
+
+MODULE_DESCRIPTION("mlx5 ConnectX control misc driver");
+MODULE_AUTHOR("Saeed Mahameed <saeedm@...dia.com>");
+MODULE_LICENSE("Dual BSD/GPL");
+
+struct mlx5ctl_dev {
+ struct mlx5_core_dev *mdev;
+ struct miscdevice miscdev;
+ struct auxiliary_device *adev;
+ struct list_head fd_list;
+ spinlock_t fd_list_lock; /* protect list add/del */
+ struct rw_semaphore rw_lock;
+ struct kref refcount;
+};
+
+struct mlx5ctl_fd {
+ u16 uctx_uid;
+ u32 uctx_cap;
+ u32 ucap; /* user cap */
+ struct mlx5ctl_dev *mcdev;
+ struct list_head list;
+};
+
+#define mlx5ctl_err(mcdev, format, ...) \
+ dev_err(mcdev->miscdev.parent, format, ##__VA_ARGS__)
+
+#define mlx5ctl_dbg(mcdev, format, ...) \
+ dev_dbg(mcdev->miscdev.parent, "PID %d: " format, \
+ current->pid, ##__VA_ARGS__)
+
+enum {
+ MLX5_UCTX_OBJECT_CAP_RAW_TX = 0x1,
+ MLX5_UCTX_OBJECT_CAP_INTERNAL_DEVICE_RESOURCES = 0x2,
+ MLX5_UCTX_OBJECT_CAP_TOOLS_RESOURCES = 0x4,
+};
+
+static int mlx5ctl_alloc_uid(struct mlx5ctl_dev *mcdev, u32 cap)
+{
+ u32 out[MLX5_ST_SZ_DW(create_uctx_out)] = {};
+ u32 in[MLX5_ST_SZ_DW(create_uctx_in)] = {};
+ void *uctx;
+ int err;
+ u16 uid;
+
+ uctx = MLX5_ADDR_OF(create_uctx_in, in, uctx);
+
+ mlx5ctl_dbg(mcdev, "MLX5_CMD_OP_CREATE_UCTX: caps 0x%x\n", cap);
+ MLX5_SET(create_uctx_in, in, opcode, MLX5_CMD_OP_CREATE_UCTX);
+ MLX5_SET(uctx, uctx, cap, cap);
+
+ err = mlx5_cmd_exec(mcdev->mdev, in, sizeof(in), out, sizeof(out));
+ if (err)
+ return err;
+
+ uid = MLX5_GET(create_uctx_out, out, uid);
+ mlx5ctl_dbg(mcdev, "allocated uid %d with caps 0x%x\n", uid, cap);
+ return uid;
+}
+
+static void mlx5ctl_release_uid(struct mlx5ctl_dev *mcdev, u16 uid)
+{
+ u32 in[MLX5_ST_SZ_DW(destroy_uctx_in)] = {};
+ struct mlx5_core_dev *mdev = mcdev->mdev;
+ int err;
+
+ MLX5_SET(destroy_uctx_in, in, opcode, MLX5_CMD_OP_DESTROY_UCTX);
+ MLX5_SET(destroy_uctx_in, in, uid, uid);
+
+ err = mlx5_cmd_exec_in(mdev, destroy_uctx, in);
+ mlx5ctl_dbg(mcdev, "released uid %d err(%d)\n", uid, err);
+}
+
+static void mcdev_get(struct mlx5ctl_dev *mcdev);
+static void mcdev_put(struct mlx5ctl_dev *mcdev);
+
+static int mlx5ctl_open_mfd(struct mlx5ctl_fd *mfd)
+{
+ struct mlx5_core_dev *mdev = mfd->mcdev->mdev;
+ struct mlx5ctl_dev *mcdev = mfd->mcdev;
+ u32 ucap = 0, cap = 0;
+ int uid;
+
+#define MLX5_UCTX_CAP(mdev, cap) \
+ (MLX5_CAP_GEN(mdev, uctx_cap) & MLX5_UCTX_OBJECT_CAP_##cap)
+
+ if (capable(CAP_NET_RAW) && MLX5_UCTX_CAP(mdev, RAW_TX)) {
+ ucap |= CAP_NET_RAW;
+ cap |= MLX5_UCTX_OBJECT_CAP_RAW_TX;
+ }
+
+ if (capable(CAP_SYS_RAWIO) && MLX5_UCTX_CAP(mdev, INTERNAL_DEVICE_RESOURCES)) {
+ ucap |= CAP_SYS_RAWIO;
+ cap |= MLX5_UCTX_OBJECT_CAP_INTERNAL_DEVICE_RESOURCES;
+ }
+
+ if (capable(CAP_SYS_ADMIN) && MLX5_UCTX_CAP(mdev, TOOLS_RESOURCES)) {
+ ucap |= CAP_SYS_ADMIN;
+ cap |= MLX5_UCTX_OBJECT_CAP_TOOLS_RESOURCES;
+ }
+
+ uid = mlx5ctl_alloc_uid(mcdev, cap);
+ if (uid < 0)
+ return uid;
+
+ mfd->uctx_uid = uid;
+ mfd->uctx_cap = cap;
+ mfd->ucap = ucap;
+ mfd->mcdev = mcdev;
+
+ mlx5ctl_dbg(mcdev, "allocated uid %d with uctx caps 0x%x, user cap 0x%x\n",
+ uid, cap, ucap);
+ return 0;
+}
+
+static void mlx5ctl_release_mfd(struct mlx5ctl_fd *mfd)
+{
+ struct mlx5ctl_dev *mcdev = mfd->mcdev;
+
+ mlx5ctl_release_uid(mcdev, mfd->uctx_uid);
+}
+
+static int mlx5ctl_open(struct inode *inode, struct file *file)
+{
+ struct mlx5_core_dev *mdev;
+ struct mlx5ctl_dev *mcdev;
+ struct mlx5ctl_fd *mfd;
+ int err = 0;
+
+ mcdev = container_of(file->private_data, struct mlx5ctl_dev, miscdev);
+ mcdev_get(mcdev);
+ down_read(&mcdev->rw_lock);
+ mdev = mcdev->mdev;
+ if (!mdev) {
+ err = -ENODEV;
+ goto unlock;
+ }
+
+ mfd = kzalloc(sizeof(*mfd), GFP_KERNEL_ACCOUNT);
+ if (!mfd)
+ return -ENOMEM;
+
+ mfd->mcdev = mcdev;
+ err = mlx5ctl_open_mfd(mfd);
+ if (err)
+ goto unlock;
+
+ spin_lock(&mcdev->fd_list_lock);
+ list_add_tail(&mfd->list, &mcdev->fd_list);
+ spin_unlock(&mcdev->fd_list_lock);
+
+ file->private_data = mfd;
+
+unlock:
+ up_read(&mcdev->rw_lock);
+ if (err) {
+ mcdev_put(mcdev);
+ kfree(mfd);
+ }
+ return err;
+}
+
+static int mlx5ctl_release(struct inode *inode, struct file *file)
+{
+ struct mlx5ctl_fd *mfd = file->private_data;
+ struct mlx5ctl_dev *mcdev = mfd->mcdev;
+
+ down_read(&mcdev->rw_lock);
+ if (!mcdev->mdev) {
+ pr_debug("[%d] UID %d mlx5ctl: mdev is already released\n",
+ current->pid, mfd->uctx_uid);
+ /* All mfds are already released, skip ... */
+ goto unlock;
+ }
+
+ spin_lock(&mcdev->fd_list_lock);
+ list_del(&mfd->list);
+ spin_unlock(&mcdev->fd_list_lock);
+
+ mlx5ctl_release_mfd(mfd);
+
+unlock:
+ kfree(mfd);
+ up_read(&mcdev->rw_lock);
+ mcdev_put(mcdev);
+ file->private_data = NULL;
+ return 0;
+}
+
+static const struct file_operations mlx5ctl_fops = {
+ .owner = THIS_MODULE,
+ .open = mlx5ctl_open,
+ .release = mlx5ctl_release,
+};
+
+static int mlx5ctl_probe(struct auxiliary_device *adev,
+ const struct auxiliary_device_id *id)
+
+{
+ struct mlx5_adev *madev = container_of(adev, struct mlx5_adev, adev);
+ struct mlx5_core_dev *mdev = madev->mdev;
+ struct mlx5ctl_dev *mcdev;
+ char *devname = NULL;
+ int err;
+
+ mcdev = kzalloc(sizeof(*mcdev), GFP_KERNEL_ACCOUNT);
+ if (!mcdev)
+ return -ENOMEM;
+
+ kref_init(&mcdev->refcount);
+ INIT_LIST_HEAD(&mcdev->fd_list);
+ spin_lock_init(&mcdev->fd_list_lock);
+ init_rwsem(&mcdev->rw_lock);
+ mcdev->mdev = mdev;
+ mcdev->adev = adev;
+ devname = kasprintf(GFP_KERNEL_ACCOUNT, "mlx5ctl-%s",
+ dev_name(&adev->dev));
+ if (!devname) {
+ err = -ENOMEM;
+ goto abort;
+ }
+
+ mcdev->miscdev = (struct miscdevice) {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = devname,
+ .fops = &mlx5ctl_fops,
+ .parent = &adev->dev,
+ };
+
+ err = misc_register(&mcdev->miscdev);
+ if (err) {
+ mlx5ctl_err(mcdev, "mlx5ctl: failed to register misc device err %d\n", err);
+ goto abort;
+ }
+
+ mlx5ctl_dbg(mcdev, "probe mdev@%s %s\n", dev_driver_string(mdev->device), dev_name(mdev->device));
+
+ auxiliary_set_drvdata(adev, mcdev);
+
+ return 0;
+
+abort:
+ kfree(devname);
+ kfree(mcdev);
+ return err;
+}
+
+static void mlx5ctl_remove(struct auxiliary_device *adev)
+{
+ struct mlx5ctl_dev *mcdev = auxiliary_get_drvdata(adev);
+ struct mlx5_core_dev *mdev = mcdev->mdev;
+ struct mlx5ctl_fd *mfd, *n;
+
+ misc_deregister(&mcdev->miscdev);
+ down_write(&mcdev->rw_lock);
+
+ list_for_each_entry_safe(mfd, n, &mcdev->fd_list, list) {
+ mlx5ctl_dbg(mcdev, "UID %d still has open FDs\n", mfd->uctx_uid);
+ list_del(&mfd->list);
+ mlx5ctl_release_mfd(mfd);
+ }
+
+ mlx5ctl_dbg(mcdev, "removed mdev %s %s\n",
+ dev_driver_string(mdev->device), dev_name(mdev->device));
+
+ mcdev->mdev = NULL; /* prevent already open fds from accessing the device */
+ up_write(&mcdev->rw_lock);
+ mcdev_put(mcdev);
+}
+
+static void mcdev_free(struct kref *ref)
+{
+ struct mlx5ctl_dev *mcdev = container_of(ref, struct mlx5ctl_dev, refcount);
+
+ kfree(mcdev->miscdev.name);
+ kfree(mcdev);
+}
+
+static void mcdev_get(struct mlx5ctl_dev *mcdev)
+{
+ kref_get(&mcdev->refcount);
+}
+
+static void mcdev_put(struct mlx5ctl_dev *mcdev)
+{
+ kref_put(&mcdev->refcount, mcdev_free);
+}
+
+static const struct auxiliary_device_id mlx5ctl_id_table[] = {
+ { .name = MLX5_ADEV_NAME ".ctl", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(auxiliary, mlx5ctl_id_table);
+
+static struct auxiliary_driver mlx5ctl_driver = {
+ .name = "ctl",
+ .probe = mlx5ctl_probe,
+ .remove = mlx5ctl_remove,
+ .id_table = mlx5ctl_id_table,
+};
+
+module_auxiliary_driver(mlx5ctl_driver);
--
2.42.0
Powered by blists - more mailing lists