[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231121135936.1669167-1-quic_prashk@quicinc.com>
Date: Tue, 21 Nov 2023 19:29:36 +0530
From: Prashanth K <quic_prashk@...cinc.com>
To: Thinh Nguyen <Thinh.Nguyen@...opsys.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
CC: Mathias Nyman <mathias.nyman@...el.com>,
<linux-kernel@...r.kernel.org>, <linux-usb@...r.kernel.org>,
Prashanth K <quic_prashk@...cinc.com>, <stable@...r.kernel.org>
Subject: [PATCH] usb: dwc3: core: Add support for XHCI_SG_TRB_CACHE_SIZE_QUIRK
Upstream commit bac1ec551434 ("usb: xhci: Set quirk for
XHCI_SG_TRB_CACHE_SIZE_QUIRK") introduced a new quirk in XHCI
which fixes XHC timeout, which was seen on synopsys XHCs while
using SG buffers. But the support for this quirk isn't present
in the DWC3 layer.
We will encounter this XHCI timeout/hung issue if we run iperf
loopback tests using RTL8156 ethernet adaptor on DWC3 targets
with scatter-gather enabled. This gets resolved after enabling
the XHCI_SG_TRB_CACHE_SIZE_QUIRK. This patch enables it using
the xhci_priv_data since its needed for DWC3 controller.
In Synopsys DWC3 databook,
Table 9-3: xHCI Debug Capability Limitations
Chained TRBs greater than TRB cache size: The debug capability
driver must not create a multi-TRB TD that describes smaller
than a 1K packet that spreads across 8 or more TRBs on either
the IN TR or the OUT TR
More information about this XHCI quirk is mentioned on the
following thread.
https://lore.kernel.org/all/20201208092912.1773650-3-mathias.nyman@linux.intel.com/
Cc: <stable@...r.kernel.org> # 5.11
Fixes: bac1ec551434 ("usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK")
Signed-off-by: Prashanth K <quic_prashk@...cinc.com>
---
drivers/usb/dwc3/host.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index 61f57fe5bb78..ee3b667a88b2 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -11,6 +11,7 @@
#include <linux/of.h>
#include <linux/platform_device.h>
+#include "../host/xhci-plat.h"
#include "core.h"
static void dwc3_host_fill_xhci_irq_res(struct dwc3 *dwc,
@@ -63,6 +64,7 @@ int dwc3_host_init(struct dwc3 *dwc)
{
struct property_entry props[4];
struct platform_device *xhci;
+ struct xhci_plat_priv dwc3_xhci_plat_priv;
int ret, irq;
int prop_idx = 0;
@@ -87,6 +89,14 @@ int dwc3_host_init(struct dwc3 *dwc)
goto err;
}
+ memset(&dwc3_xhci_plat_priv, 0, sizeof(struct xhci_plat_priv));
+
+ dwc3_xhci_plat_priv.quirks |= XHCI_SG_TRB_CACHE_SIZE_QUIRK;
+ ret = platform_device_add_data(xhci, &dwc3_xhci_plat_priv,
+ sizeof(dwc3_xhci_plat_priv));
+ if (ret)
+ goto err;
+
memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
if (dwc->usb3_lpm_capable)
--
2.25.1
Powered by blists - more mailing lists