[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <86656263-689d-4979-a3e2-6026bba69d08@linaro.org>
Date: Wed, 22 Nov 2023 21:06:02 +0100
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: David Wronek <davidwronek@...il.com>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Herbert Xu <herbert@...dor.apana.org.au>,
"David S . Miller" <davem@...emloft.net>,
Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Manivannan Sadhasivam <mani@...nel.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
Avri Altman <avri.altman@....com>,
Bart Van Assche <bvanassche@....org>,
Joe Mason <buddyjojo06@...look.com>, hexdump0815@...glemail.com
Cc: cros-qcom-dts-watchers@...omium.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-crypto@...r.kernel.org, linux-phy@...ts.infradead.org,
linux-scsi@...r.kernel.org, ~postmarketos/upstreaming@...ts.sr.ht,
phone-devel@...r.kernel.org
Subject: Re: [PATCH v2 7/8] arm64: dts: qcom: sm7125-xiaomi-common: Add UFS
nodes
On 11/17/23 21:08, David Wronek wrote:
> Enable the UFS found on the SM7125 Xiaomi smartphones.
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
> Signed-off-by: David Wronek <davidwronek@...il.com>
> ---
> .../boot/dts/qcom/sm7125-xiaomi-common.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi
> index e55cd83c19b8..22ad8a25217e 100644
> --- a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi
> @@ -398,6 +398,22 @@ sd-cd-pins {
> };
> };
>
> +&ufs_mem_hc {
> + vcc-supply = <&vreg_l19a_3p0>;
> + vcc-max-microamp = <600000>;
> + vccq2-supply = <&vreg_l12a_1p8>;
> + vccq2-max-microamp = <600000>;
> + status = "okay";
> +};
> +
> +&ufs_mem_phy {
> + vdda-phy-supply = <&vreg_l4a_0p88>;
> + vdda-pll-supply = <&vreg_l3c_1p23>;
> + vdda-phy-max-microamp = <62900>;
> + vdda-pll-max-microamp = <18300>;
These regulators need regulator-allow-set-load and allowed-modes
Konrad
Powered by blists - more mailing lists