| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAJZ5v0iYRXh369M3XTM0V8Q9mWkAT2y+9pJMD7HMaGjgpvFEMw@mail.gmail.com>
Date: Wed, 22 Nov 2023 21:16:39 +0100
From: "Rafael J. Wysocki" <rafael@...nel.org>
To: Russell King <rmk+kernel@...linux.org.uk>
Cc: linux-pm@...r.kernel.org, loongarch@...ts.linux.dev,
linux-acpi@...r.kernel.org, linux-arch@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-riscv@...ts.infradead.org, kvmarm@...ts.linux.dev,
x86@...nel.org, linux-csky@...r.kernel.org,
linux-doc@...r.kernel.org, linux-ia64@...r.kernel.org,
linux-parisc@...r.kernel.org, Salil Mehta <salil.mehta@...wei.com>,
Jean-Philippe Brucker <jean-philippe@...aro.org>,
jianyong.wu@....com, justin.he@....com,
James Morse <james.morse@....com>,
Huacai Chen <chenhuacai@...nel.org>,
WANG Xuerui <kernel@...0n.name>,
Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...hat.com>, Borislav Petkov <bp@...en8.de>,
Dave Hansen <dave.hansen@...ux.intel.com>,
"H. Peter Anvin" <hpa@...or.com>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Len Brown <lenb@...nel.org>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>
Subject: Re: [PATCH 05/21] ACPI: Move ACPI_HOTPLUG_CPU to be disabled on arm64
and riscv
On Tue, Nov 21, 2023 at 2:44 PM Russell King <rmk+kernel@...linux.org.uk> wrote:
>
> From: James Morse <james.morse@....com>
>
> Neither arm64 nor riscv support physical hotadd of CPUs that were not
> present at boot. For arm64 much of the platform description is in static
> tables which do not have update methods. arm64 does support HOTPLUG_CPU,
> which is backed by a firmware interface to turn CPUs on and off.
>
> acpi_processor_hotadd_init() and acpi_processor_remove() are for adding
> and removing CPUs that were not present at boot. arm64 systems that do this
> are not supported as there is currently insufficient information in the
> platform description. (e.g. did the GICR get removed too?)
>
> arm64 currently relies on the MADT enabled flag check in map_gicc_mpidr()
> to prevent CPUs that were not described as present at boot from being
> added to the system. Similarly, riscv relies on the same check in
> map_rintc_hartid(). Both architectures also rely on the weak 'always fails'
> definitions of acpi_map_cpu() and arch_register_cpu().
>
> Subsequent changes will redefine ACPI_HOTPLUG_CPU as making possible
> CPUs present. Neither arm64 nor riscv support this.
>
> Disable ACPI_HOTPLUG_CPU for arm64 and riscv by removing 'default y' and
> selecting it on the other three ACPI architectures. This allows the weak
> definitions of some symbols to be removed.
>
> Signed-off-by: James Morse <james.morse@....com>
> Reviewed-by: Shaoqin Huang <shahuang@...hat.com>
> Reviewed-by: Gavin Shan <gshan@...hat.com>
> Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
I can apply this if it gets ACKs from the maintainers of the affected
architectures.
> ---
> Changes since RFC:
> * Expanded conditions to avoid ACPI_HOTPLUG_CPU being enabled when
> HOTPLUG_CPU isn't.
> Changes since RFC v3:
> * Dropped ia64 changes
> ---
> arch/loongarch/Kconfig | 1 +
> arch/x86/Kconfig | 1 +
> drivers/acpi/Kconfig | 1 -
> drivers/acpi/acpi_processor.c | 18 ------------------
> 4 files changed, 2 insertions(+), 19 deletions(-)
>
> diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig
> index ee123820a476..331becb2cb4f 100644
> --- a/arch/loongarch/Kconfig
> +++ b/arch/loongarch/Kconfig
> @@ -5,6 +5,7 @@ config LOONGARCH
> select ACPI
> select ACPI_GENERIC_GSI if ACPI
> select ACPI_MCFG if ACPI
> + select ACPI_HOTPLUG_CPU if ACPI_PROCESSOR && HOTPLUG_CPU
> select ACPI_PPTT if ACPI
> select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
> select ARCH_BINFMT_ELF_STATE
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index 3762f41bb092..dbdcfc708369 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -59,6 +59,7 @@ config X86
> #
> select ACPI_LEGACY_TABLES_LOOKUP if ACPI
> select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
> + select ACPI_HOTPLUG_CPU if ACPI_PROCESSOR && HOTPLUG_CPU
> select ARCH_32BIT_OFF_T if X86_32
> select ARCH_CLOCKSOURCE_INIT
> select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index f819e760ff19..a3acfc750fce 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -310,7 +310,6 @@ config ACPI_HOTPLUG_CPU
> bool
> depends on ACPI_PROCESSOR && HOTPLUG_CPU
> select ACPI_CONTAINER
> - default y
>
> config ACPI_PROCESSOR_AGGREGATOR
> tristate "Processor Aggregator"
> diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
> index 0f5218e361df..4fe2ef54088c 100644
> --- a/drivers/acpi/acpi_processor.c
> +++ b/drivers/acpi/acpi_processor.c
> @@ -184,24 +184,6 @@ static void __init acpi_pcc_cpufreq_init(void) {}
>
> /* Initialization */
> #ifdef CONFIG_ACPI_HOTPLUG_CPU
> -int __weak acpi_map_cpu(acpi_handle handle,
> - phys_cpuid_t physid, u32 acpi_id, int *pcpu)
> -{
> - return -ENODEV;
> -}
> -
> -int __weak acpi_unmap_cpu(int cpu)
> -{
> - return -ENODEV;
> -}
> -
> -int __weak arch_register_cpu(int cpu)
> -{
> - return -ENODEV;
> -}
> -
> -void __weak arch_unregister_cpu(int cpu) {}
> -
> static int acpi_processor_hotadd_init(struct acpi_processor *pr)
> {
> unsigned long long sta;
> --
> 2.30.2
>
Powered by blists - more mailing lists