| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CY5PR12MB637274F20E0AE776A315A79FBFBAA@CY5PR12MB6372.namprd12.prod.outlook.com>
Date: Wed, 22 Nov 2023 07:37:51 +0000
From: Jianheng Zhang <Jianheng.Zhang@...opsys.com>
To: Serge Semin <fancer.lancer@...il.com>
CC: Russell King <linux@...linux.org.uk>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <Jose.Abreu@...opsys.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Tan Tee Min <tee.min.tan@...el.com>,
Ong Boon Leong <boon.leong.ong@...el.com>,
Voon Weifeng <weifeng.voon@...el.com>,
Mohammad Athari Bin Ismail <mohammad.athari.ismail@...el.com>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-stm32@...md-mailman.stormreply.com"
<linux-stm32@...md-mailman.stormreply.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
James Li <James.Li1@...opsys.com>,
Martin McKenny <Martin.McKenny@...opsys.com>
Subject: RE: [PATCH] net: stmmac: fix FPE events losing
> From: Serge Semin <fancer.lancer@...il.com>
> Sent: Tuesday, November 21, 2023 8:09 PM
> To: Jianheng Zhang <jianheng@...opsys.com>
> Cc: Russell King <linux@...linux.org.uk>; Alexandre Torgue <alexandre.torgue@...s.st.com>; Jose
> Abreu <joabreu@...opsys.com>; David S. Miller <davem@...emloft.net>; Eric Dumazet
> <edumazet@...gle.com>; Jakub Kicinski <kuba@...nel.org>; Paolo Abeni <pabeni@...hat.com>;
> Maxime Coquelin <mcoquelin.stm32@...il.com>; Tan Tee Min <tee.min.tan@...el.com>; Ong Boon
> Leong <boon.leong.ong@...el.com>; Voon Weifeng <weifeng.voon@...el.com>; Mohammad Athari Bin
> Ismail <mohammad.athari.ismail@...el.com>; netdev@...r.kernel.org;
> linux-stm32@...md-mailman.stormreply.com; linux-arm-kernel@...ts.infradead.org;
> linux-kernel@...r.kernel.org; James Li <lijames@...opsys.com>
> Subject: Re: [PATCH] net: stmmac: fix FPE events losing
>
> On Tue, Nov 21, 2023 at 09:31:31AM +0000, Jianheng Zhang wrote:
> > > From: Jianheng Zhang
> > > Sent: Thursday, November 16, 2023 12:01 AM
> > > To: Russell King <linux@...linux.org.uk>; Serge Semin <fancer.lancer@...il.com>
> > > Cc: Alexandre Torgue <alexandre.torgue@...s.st.com>; Jose Abreu <joabreu@...opsys.com>; David
> S.
> > > Miller <davem@...emloft.net>; Eric Dumazet <edumazet@...gle.com>; Jakub Kicinski
> > > <kuba@...nel.org>; Paolo Abeni <pabeni@...hat.com>; Maxime Coquelin
> > > <mcoquelin.stm32@...il.com>; Tan Tee Min <tee.min.tan@...el.com>; Ong Boon Leong
> > > <boon.leong.ong@...el.com>; Voon Weifeng <weifeng.voon@...el.com>; Mohammad Athari Bin
> Ismail
> > > <mohammad.athari.ismail@...el.com>; netdev@...r.kernel.org;
> > > linux-stm32@...md-mailman.stormreply.com; linux-arm-kernel@...ts.infradead.org;
> > > linux-kernel@...r.kernel.org
> > > Subject: RE: [PATCH] net: stmmac: fix FPE events losing
> > >
> > >
> > > > -----Original Message-----
> > > > From: Russell King <linux@...linux.org.uk>
> > > > Sent: Wednesday, November 15, 2023 10:26 PM
> > > > To: Serge Semin <fancer.lancer@...il.com>
> > > > Cc: Jianheng Zhang <jianheng@...opsys.com>; Alexandre Torgue
> <alexandre.torgue@...s.st.com>;
> > > Jose
> > > > Abreu <joabreu@...opsys.com>; David S. Miller <davem@...emloft.net>; Eric Dumazet
> > > > <edumazet@...gle.com>; Jakub Kicinski <kuba@...nel.org>; Paolo Abeni <pabeni@...hat.com>;
> > > > Maxime Coquelin <mcoquelin.stm32@...il.com>; Tan Tee Min <tee.min.tan@...el.com>; Ong
> Boon
> > > > Leong <boon.leong.ong@...el.com>; Voon Weifeng <weifeng.voon@...el.com>; Mohammad
> Athari
> > > Bin
> > > > Ismail <mohammad.athari.ismail@...el.com>; netdev@...r.kernel.org;
> > > > linux-stm32@...md-mailman.stormreply.com; linux-arm-kernel@...ts.infradead.org;
> > > > linux-kernel@...r.kernel.org
> > > > Subject: Re: [PATCH] net: stmmac: fix FPE events losing
> > > >
> > > > On Tue, Nov 14, 2023 at 02:59:57PM +0300, Serge Semin wrote:
> > > > > On Tue, Nov 14, 2023 at 11:07:34AM +0000, Jianheng Zhang wrote:
> > > > > > The 32-bit access of register MAC_FPE_CTRL_STS may clear the FPE status
> > > > > > bits unexpectedly. Use 8-bit access for MAC_FPE_CTRL_STS control bits to
> > > > > > avoid unexpected access of MAC_FPE_CTRL_STS status bits that can reduce
> > > > > > the FPE handshake retries.
> > > > > >
> > > > > > The bit[19:17] of register MAC_FPE_CTRL_STS are status register bits.
> > > > > > Those bits are clear on read (or write of 1 when RCWE bit in
> > > > > > MAC_CSR_SW_Ctrl register is set). Using 32-bit access for
> > > > > > MAC_FPE_CTRL_STS control bits makes side effects that clear the status
> > > > > > bits. Then the stmmac interrupt handler missing FPE event status and
> > > > > > leads to FPE handshake failure and retries.
> > > > > >
> > > > > > The bit[7:0] of register MAC_FPE_CTRL_STS are control bits or reserved
> > > > > > that have no access side effects, so can use 8-bit access for
> > > > > > MAC_FPE_CTRL_STS control bits.
> > > > > >
> > > > > > Fixes: 5a5586112b92 ("net: stmmac: support FPE link partner hand-shaking procedure")
> > > > > > Signed-off-by: jianheng <jianheng@...opsys.com>
> > > > > > ---
> > > > > > drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 12 ++++++------
> > > > > > 1 file changed, 6 insertions(+), 6 deletions(-)
> > > > > >
> > > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > > b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > > > > index e95d35f..7333995 100644
> > > > > > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > > > > @@ -716,11 +716,11 @@ void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq,
> u32
> > > > num_rxq,
> > > > > > u32 value;
> > > > > >
> > > > > > if (!enable) {
> > > > >
> > > > > > - value = readl(ioaddr + MAC_FPE_CTRL_STS);
> > > > > > + value = readb(ioaddr + MAC_FPE_CTRL_STS);
> > > > >
> > > > > Note this may break the platforms which don't support non-32 MMIOs for
> > > > > some devices. None of the currently supported glue-drivers explicitly
> > > > > state they have such peculiarity, but at the same time the STMMAC-core
> > > > > driver at the present state uses the dword IO ops only. For instance
> > > > > the PCIe subsystem has the special accessors for such cases:
> > > > > pci_generic_config_read32()
> > > > > pci_generic_config_write32()
> > > > > which at the very least are utilized on the Tegra and Loongson
> > > > > platforms to access the host CSR spaces. These platforms are also
> > > > > equipped with the DW MACs. The problem might be irrelevant for all the
> > > > > currently supported DW MAC controllers implementations though, but
> > > > > still it worth to draw an attention to the problem possibility and in
> > > > > order to prevent it before ahead it would be better to just avoid
> > > > > using the byte-/word- IOs if it's possible.
> > > >
> > > > Yes, this exists for configuration accesses, and is damn annoying
> > > > because the read-modify-write of these can end up clearing PCI
> > > > status register bits that are W1C.
> > > >
> > > > I've never heard of that problem with MMIO though.
> > > >
> > > > --
> > > > RMK's Patch system:
> > > >
> > >
> https://urldefense.com/v3/__https://www.armlinux.org.uk/developer/patches/__;!!A4F2R9G_pg!ZnsQc
> > > >
> > >
> 7LKbdCiIj_nLBkt44MRSL8W8YD4WvMmPNkHFlDMrjrVqEVOVA1-P-9BVE3Oa5bC1ymKXLNV5C9mJ_rfFtLW
> > > > Fg$
> > > > FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
> > > Thanks for all your mention about the potential risks of using readb and suggestions, I'll consider a
> new
> > > solution and update the patch.
> > >
> > > Best Regards,
> > > Jianheng
> >
> > Thanks for Andrew's suggestion. I consider the solution of set
> > MAC_CSR_SW_Ctrl.RCWE carefully and found that the MAC_CSR_SW_Ctrl.RCWE
> > is efficient for many other interrupt status registers, and some are used
> > in current stmmac driver (LPI PMT MMC etc). Those registers work fine in
> > clear on read mode with current code. So, I think there is no need to
> > set MAC_CSR_SW_Ctrl.RCWE that will make a large impact to current
> > interrupt handler.
> >
> > I try adding a new member variable(staged_fpe_state) to stmmac_fpe_cfg
> > that is used to stage the MAC_FPE_CTRL_STS value read in
> > dwmac5_fpe_send_mpacket(). And in dwmac5_fpe_irq_status(), use this staged
> > value and current value of MAC_FPE_CTRL_STS to check FPE status. The
> > draft patch is below.
>
> Are the status flags in the MAC_FPE_CTRL_STS register cleared on
> _writes_? (I am asking because for some reason my DW QoS Eth v5.10a HW
> manual has the status MAC_FPE_CTRL_STS flags marked as R/W, which is
> weird access mode for the status flags.) If they turn to be _not_
> changeable on writes, then what about just converting the
> dwmac5_fpe_configure() and dwmac5_fpe_send_mpacket() methods to always
> writing to the MAC_FPE_CTRL_STS register, and if required preserve the
> shadow control MAC_FPE_CTRL_STS flags in the stmmac_fpe_cfg structure?
> AFAICS the only flag which needs to be preserved is EFPE - "enable
> FPE" flag.
>
> Such implementation (if it's possible) shall be free from the _status_
> flags race condition and won't require additional serializations. On
> the contrary your suggestion AFAICS causes unresolved race condition
> in here
>
> > + value = readl(ioaddr + MAC_FPE_CTRL_STS) | fpe_cfg->staged_fpe_state;
> > + fpe_cfg->staged_fpe_state = 0x0;
>
> and here
>
> > value = readl(ioaddr + MAC_FPE_CTRL_STS);
> > + cfg->staged_fpe_state = value;
>
> Depending on the IRQ handling and the task scheduling timing you may
> end up with loosing the status flags anyway.
>
> * Note I am not concerning here the MAC_FPE_CTRL_STS control flags
> * race condition which AFAICS already exist in the current frame
> * preemption code. See the configs performed in the open/close/suspend
> * methods, in the link state change callbacks, in the worker task and
> * in the FPE status IRQ handler. Control flag accesses don't look
> * coherent there.
>
> -Serge(y)
>
> >
> > Best Regards,
> > Jianheng
> >
> > [PATCH v2] net: stmmac: fix FPE events losing
> >
> > ---
> > drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 9 +++++++--
> > drivers/net/ethernet/stmicro/stmmac/dwmac5.h | 1 +
> > drivers/net/ethernet/stmicro/stmmac/hwif.h | 1 +
> > drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++++-
> > include/linux/stmmac.h | 1 +
> > 5 files changed, 15 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > index e95d35f..8917fd0 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > @@ -736,12 +736,15 @@ void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32
> num_rxq,
> >
> > int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
> > {
> > + struct stmmac_priv *priv = netdev_priv(dev);
> > + struct stmmac_fpe_cfg *fpe_cfg = priv->plat->fpe_cfg;
> > u32 value;
> > int status;
> >
> > status = FPE_EVENT_UNKNOWN;
> >
> > - value = readl(ioaddr + MAC_FPE_CTRL_STS);
> > + value = readl(ioaddr + MAC_FPE_CTRL_STS) | fpe_cfg->staged_fpe_state;
> > + fpe_cfg->staged_fpe_state = 0x0;
> >
> > if (value & TRSP) {
> > status |= FPE_EVENT_TRSP;
> > @@ -766,11 +769,13 @@ int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
> > return status;
> > }
> >
> > -void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, enum stmmac_mpacket_type type)
> > +void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
> > + enum stmmac_mpacket_type type)
> > {
> > u32 value;
> >
> > value = readl(ioaddr + MAC_FPE_CTRL_STS);
> > + cfg->staged_fpe_state = value;
> >
> > if (type == MPACKET_VERIFY) {
> > value &= ~SRSP;
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
> b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
> > index 53c138d..022c1a2 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
> > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
> > @@ -156,6 +156,7 @@ void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device *dev,
> > void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
> > bool enable);
> > void dwmac5_fpe_send_mpacket(void __iomem *ioaddr,
> > + struct stmmac_fpe_cfg *cfg,
> > enum stmmac_mpacket_type type);
> > int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev);
> >
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h
> b/drivers/net/ethernet/stmicro/stmmac/hwif.h
> > index b95d3e1..5496781 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
> > +++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
> > @@ -415,6 +415,7 @@ struct stmmac_ops {
> > void (*fpe_configure)(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
> > bool enable);
> > void (*fpe_send_mpacket)(void __iomem *ioaddr,
> > + struct stmmac_fpe_cfg *cfg,
> > enum stmmac_mpacket_type type);
> > int (*fpe_irq_status)(void __iomem *ioaddr, struct net_device *dev);
> > };
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > index 3e50fd5..6a29f55 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > @@ -964,7 +964,8 @@ static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool
> is_up)
> > bool *hs_enable = &fpe_cfg->hs_enable;
> >
> > if (is_up && *hs_enable) {
> > - stmmac_fpe_send_mpacket(priv, priv->ioaddr, MPACKET_VERIFY);
> > + stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg,
> > + MPACKET_VERIFY);
> > } else {
> > *lo_state = FPE_STATE_OFF;
> > *lp_state = FPE_STATE_OFF;
> > @@ -5838,6 +5839,7 @@ static void stmmac_fpe_event_status(struct stmmac_priv *priv, int status)
> > /* If user has requested FPE enable, quickly response */
> > if (*hs_enable)
> > stmmac_fpe_send_mpacket(priv, priv->ioaddr,
> > + fpe_cfg,
> > MPACKET_RESPONSE);
> > }
> >
> > @@ -7280,6 +7282,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work)
> > netdev_info(priv->dev, SEND_VERIFY_MPAKCET_FMT,
> > *lo_state, *lp_state);
> > stmmac_fpe_send_mpacket(priv, priv->ioaddr,
> > + fpe_cfg,
> > MPACKET_VERIFY);
> > }
> > /* Sleep then retry */
> > @@ -7294,6 +7297,7 @@ void stmmac_fpe_handshake(struct stmmac_priv *priv, bool enable)
> > if (priv->plat->fpe_cfg->hs_enable != enable) {
> > if (enable) {
> > stmmac_fpe_send_mpacket(priv, priv->ioaddr,
> > + priv->plat->fpe_cfg,
> > MPACKET_VERIFY);
> > } else {
> > priv->plat->fpe_cfg->lo_fpe_state = FPE_STATE_OFF;
> > diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
> > index 0b4658a..1322c78 100644
> > --- a/include/linux/stmmac.h
> > +++ b/include/linux/stmmac.h
> > @@ -175,6 +175,7 @@ struct stmmac_fpe_cfg {
> > bool hs_enable; /* FPE handshake enable */
> > enum stmmac_fpe_state lp_fpe_state; /* Link Partner FPE state */
> > enum stmmac_fpe_state lo_fpe_state; /* Local station FPE state */
> > + u32 staged_fpe_state; /* Staged FPE state when read MAC_FPE_CTRL_STS */
> > };
> >
> > struct stmmac_safety_feature_cfg {
> > --
> > 1.8.3.1
> >
Hi Serge,
Thanks for your suggestion.
> Are the status flags in the MAC_FPE_CTRL_STS register cleared on
> _writes_?
A write of 0 has no impact irrespective of the value programmed in RCWE bit.
This is safe option when writing the MAC_FPE_CTRL_STS register, which will
ensure that bits[19:16] are not modified unintentionally.
When RCWE bit is 0 and status bits[19:16] are read, those will be cleared, a write
of 0 or 1 do not have any impact in this mode.
> then what about just converting the
> dwmac5_fpe_configure() and dwmac5_fpe_send_mpacket() methods to always
> writing to the MAC_FPE_CTRL_STS register, and if required preserve the
> shadow control MAC_FPE_CTRL_STS flags in the stmmac_fpe_cfg structure?
> AFAICS the only flag which needs to be preserved is EFPE - "enable
> FPE" flag.
I think this is a good solution, pls check my draft patch below.
-Jianheng
[PATCH v2] net: stmmac: fix FPE events losing
---
drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 26 +++++++++-------------
drivers/net/ethernet/stmicro/stmmac/dwmac5.h | 4 +++-
.../net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 3 ++-
drivers/net/ethernet/stmicro/stmmac/hwif.h | 4 +++-
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 8 ++++++-
drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 1 +
include/linux/stmmac.h | 1 +
7 files changed, 28 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
index e95d35f..9575e84 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
@@ -710,17 +710,15 @@ void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device *dev,
}
}
-void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
+void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+ u32 num_txq, u32 num_rxq,
bool enable)
{
u32 value;
if (!enable) {
- value = readl(ioaddr + MAC_FPE_CTRL_STS);
-
- value &= ~EFPE;
-
- writel(value, ioaddr + MAC_FPE_CTRL_STS);
+ writel(0x0, ioaddr + MAC_FPE_CTRL_STS);
+ cfg->fpe_ctrl_sts_shadow = 0x0;
return;
}
@@ -729,9 +727,9 @@ void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
value |= (num_rxq - 1) << GMAC_RXQCTRL_FPRQ_SHIFT;
writel(value, ioaddr + GMAC_RXQ_CTRL1);
- value = readl(ioaddr + MAC_FPE_CTRL_STS);
- value |= EFPE;
+ value = EFPE;
writel(value, ioaddr + MAC_FPE_CTRL_STS);
+ cfg->fpe_ctrl_sts_shadow = EFPE;
}
int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
@@ -766,19 +764,17 @@ int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
return status;
}
-void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, enum stmmac_mpacket_type type)
+void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+ enum stmmac_mpacket_type type)
{
u32 value;
- value = readl(ioaddr + MAC_FPE_CTRL_STS);
+ value = cfg->fpe_ctrl_sts_shadow;
- if (type == MPACKET_VERIFY) {
- value &= ~SRSP;
+ if (type == MPACKET_VERIFY)
value |= SVER;
- } else {
- value &= ~SVER;
+ else
value |= SRSP;
- }
writel(value, ioaddr + MAC_FPE_CTRL_STS);
}
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
index 53c138d..aca846d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
@@ -153,9 +153,11 @@ int dwmac5_est_configure(void __iomem *ioaddr, struct stmmac_est *cfg,
unsigned int ptp_rate);
void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device *dev,
struct stmmac_extra_stats *x, u32 txqcnt);
-void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
+void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+ u32 num_txq, u32 num_rxq,
bool enable);
void dwmac5_fpe_send_mpacket(void __iomem *ioaddr,
+ struct stmmac_fpe_cfg *cfg,
enum stmmac_mpacket_type type);
int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev);
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
index 453e88b..a74e71d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
@@ -1484,7 +1484,8 @@ static int dwxgmac3_est_configure(void __iomem *ioaddr, struct stmmac_est *cfg,
return 0;
}
-static void dwxgmac3_fpe_configure(void __iomem *ioaddr, u32 num_txq,
+static void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+ u32 num_txq,
u32 num_rxq, bool enable)
{
u32 value;
diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index b95d3e1..68aa2d5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
@@ -412,9 +412,11 @@ struct stmmac_ops {
unsigned int ptp_rate);
void (*est_irq_status)(void __iomem *ioaddr, struct net_device *dev,
struct stmmac_extra_stats *x, u32 txqcnt);
- void (*fpe_configure)(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
+ void (*fpe_configure)(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+ u32 num_txq, u32 num_rxq,
bool enable);
void (*fpe_send_mpacket)(void __iomem *ioaddr,
+ struct stmmac_fpe_cfg *cfg,
enum stmmac_mpacket_type type);
int (*fpe_irq_status)(void __iomem *ioaddr, struct net_device *dev);
};
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 3e50fd5..7791e9b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -964,7 +964,8 @@ static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up)
bool *hs_enable = &fpe_cfg->hs_enable;
if (is_up && *hs_enable) {
- stmmac_fpe_send_mpacket(priv, priv->ioaddr, MPACKET_VERIFY);
+ stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg,
+ MPACKET_VERIFY);
} else {
*lo_state = FPE_STATE_OFF;
*lp_state = FPE_STATE_OFF;
@@ -5838,6 +5839,7 @@ static void stmmac_fpe_event_status(struct stmmac_priv *priv, int status)
/* If user has requested FPE enable, quickly response */
if (*hs_enable)
stmmac_fpe_send_mpacket(priv, priv->ioaddr,
+ fpe_cfg,
MPACKET_RESPONSE);
}
@@ -7262,6 +7264,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work)
if (*lo_state == FPE_STATE_ENTERING_ON &&
*lp_state == FPE_STATE_ENTERING_ON) {
stmmac_fpe_configure(priv, priv->ioaddr,
+ fpe_cfg,
priv->plat->tx_queues_to_use,
priv->plat->rx_queues_to_use,
*enable);
@@ -7280,6 +7283,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work)
netdev_info(priv->dev, SEND_VERIFY_MPAKCET_FMT,
*lo_state, *lp_state);
stmmac_fpe_send_mpacket(priv, priv->ioaddr,
+ fpe_cfg,
MPACKET_VERIFY);
}
/* Sleep then retry */
@@ -7294,6 +7298,7 @@ void stmmac_fpe_handshake(struct stmmac_priv *priv, bool enable)
if (priv->plat->fpe_cfg->hs_enable != enable) {
if (enable) {
stmmac_fpe_send_mpacket(priv, priv->ioaddr,
+ priv->plat->fpe_cfg,
MPACKET_VERIFY);
} else {
priv->plat->fpe_cfg->lo_fpe_state = FPE_STATE_OFF;
@@ -7754,6 +7759,7 @@ int stmmac_suspend(struct device *dev)
if (priv->dma_cap.fpesel) {
/* Disable FPE */
stmmac_fpe_configure(priv, priv->ioaddr,
+ priv->plat->fpe_cfg,
priv->plat->tx_queues_to_use,
priv->plat->rx_queues_to_use, false);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index ac41ef4..6ad3e0a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -1079,6 +1079,7 @@ static int tc_setup_taprio(struct stmmac_priv *priv,
priv->plat->fpe_cfg->enable = false;
stmmac_fpe_configure(priv, priv->ioaddr,
+ priv->plat->fpe_cfg,
priv->plat->tx_queues_to_use,
priv->plat->rx_queues_to_use,
false);
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 0b4658a..48385c7 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -175,6 +175,7 @@ struct stmmac_fpe_cfg {
bool hs_enable; /* FPE handshake enable */
enum stmmac_fpe_state lp_fpe_state; /* Link Partner FPE state */
enum stmmac_fpe_state lo_fpe_state; /* Local station FPE state */
+ u32 fpe_ctrl_sts_shadow; /* shadow of MAC_FPE_CTRL_STS */
};
struct stmmac_safety_feature_cfg {
--
1.8.3.1
Powered by blists - more mailing lists