| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231122105243.GB28959@kernel.org>
Date: Wed, 22 Nov 2023 10:52:43 +0000
From: Simon Horman <horms@...nel.org>
To: Christian Marangi <ansuelsmth@...il.com>
Cc: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Florian Fainelli <florian.fainelli@...adcom.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@...adcom.com>,
Daniel Golle <daniel@...rotopia.org>,
Qingfang Deng <dqfext@...il.com>,
SkyLake Huang <SkyLake.Huang@...iatek.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
David Epping <david.epping@...singlinkelectronics.com>,
Vladimir Oltean <olteanv@...il.com>,
"Russell King (Oracle)" <rmk+kernel@...linux.org.uk>,
Harini Katakam <harini.katakam@....com>,
Robert Marko <robert.marko@...tura.hr>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org
Subject: Re: [net-next RFC PATCH 04/14] net: phy: add initial support for PHY
package in DT
On Mon, Nov 20, 2023 at 02:50:31PM +0100, Christian Marangi wrote:
> Add initial support for PHY package in DT.
>
> Make it easier to define PHY package and describe the global PHY
> directly in DT by refereincing them by phandles instead of custom
> functions in each PHY driver.
>
> Each PHY in a package needs to be defined in a dedicated node in the
> mdio node. This dedicated node needs to have the compatible set to
> "ethernet-phy-package" and define "global-phys" and "#global-phy-cells"
> respectively to a list of phandle to the global phy to define for the
> PHY package and 0 for cells as the phandle won't take any args.
>
> With this defined, the generic PHY probe will join each PHY in this
> dedicated node to the package.
>
> PHY driver MUST set the required global PHY count in
> .phy_package_global_phy_num to correctly verify that DT define the
> correct number of phandle to the required global PHY.
>
> mdio_bus.c and of_mdio.c is updated to now support and parse also
> PHY package subnote that have the compatible "phy-package".
>
> Signed-off-by: Christian Marangi <ansuelsmth@...il.com>
Hi Christian,
I was a little hasty in hitting send on my previous message.
Please find some more minor feedback from my side below.
...
> diff --git a/drivers/net/mdio/of_mdio.c b/drivers/net/mdio/of_mdio.c
> index 64ebcb6d235c..bb910651118f 100644
> --- a/drivers/net/mdio/of_mdio.c
> +++ b/drivers/net/mdio/of_mdio.c
> @@ -139,6 +139,44 @@ bool of_mdiobus_child_is_phy(struct device_node *child)
> }
> EXPORT_SYMBOL(of_mdiobus_child_is_phy);
>
> +static int __of_mdiobus_parse_phys(struct mii_bus *mdio, struct device_node *np,
> + bool *scanphys)
> +{
> + struct device_node *child;
> + int addr, rc;
> +
> + /* Loop over the child nodes and register a phy_device for each phy */
> + for_each_available_child_of_node(np, child) {
> + if (of_device_is_compatible(child, "ethernet-phy-package")) {
> + rc = __of_mdiobus_parse_phys(mdio, child, scanphys);
> + if (rc && rc != -ENODEV)
> + return rc;
for_each_available_child_of_node() makes calls to of_node_get() and
of_node_put(), so when jumping out of a loop it is necessary to call
of_node_put(), in this case of_node_put(child).
As flagged by Coccinelle.
Also flagged in of_mdiobus_find_phy() both before and after this patch.
> +
> + continue;
> + }
> +
> + addr = of_mdio_parse_addr(&mdio->dev, child);
> + if (addr < 0) {
> + *scanphys = true;
> + continue;
> + }
> +
> + if (of_mdiobus_child_is_phy(child))
> + rc = of_mdiobus_register_phy(mdio, child, addr);
> + else
> + rc = of_mdiobus_register_device(mdio, child, addr);
> +
> + if (rc == -ENODEV)
> + dev_err(&mdio->dev,
> + "MDIO device at address %d is missing.\n",
> + addr);
> + else if (rc)
> + return rc;
> + }
> +
> + return 0;
> +}
> +
> /**
> * __of_mdiobus_register - Register mii_bus and create PHYs from the device tree
> * @mdio: pointer to mii_bus structure
> @@ -180,25 +218,9 @@ int __of_mdiobus_register(struct mii_bus *mdio, struct device_node *np,
> return rc;
>
> /* Loop over the child nodes and register a phy_device for each phy */
> - for_each_available_child_of_node(np, child) {
> - addr = of_mdio_parse_addr(&mdio->dev, child);
> - if (addr < 0) {
> - scanphys = true;
> - continue;
> - }
> -
> - if (of_mdiobus_child_is_phy(child))
> - rc = of_mdiobus_register_phy(mdio, child, addr);
> - else
> - rc = of_mdiobus_register_device(mdio, child, addr);
> -
> - if (rc == -ENODEV)
> - dev_err(&mdio->dev,
> - "MDIO device at address %d is missing.\n",
> - addr);
> - else if (rc)
> - goto unregister;
> - }
> + rc = __of_mdiobus_parse_phys(mdio, np, &scanphys);
> + if (rc)
> + goto unregister;
Jumping to unregister will call of_node_put(child),
however child appears to be uninitialised here.
Flagged by clang-16 W=1 build, and Smatch.
>
> if (!scanphys)
> return 0;
...
Powered by blists - more mailing lists