Message-ID: <20231122112803.GG173820@google.com>
Date:   Wed, 22 Nov 2023 11:28:03 +0000
From:   Lee Jones <lee@...nel.org>
To:     Florian Eckert <fe@....tdt.de>
Cc:     m.brock@...mierlo.com, Eckert.Florian@...glemail.com,
        gregkh@...uxfoundation.org, jirislaby@...nel.org, pavel@....cz,
        kabel@...nel.org, u.kleine-koenig@...gutronix.de,
        linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org,
        linux-leds@...r.kernel.org
Subject: Re: [Patch v8 6/6] leds: ledtrig-tty: add additional line state
 evaluation

On Wed, 22 Nov 2023, Florian Eckert wrote:

> 
> 
> On 2023-11-21 16:23, Lee Jones wrote:
> > On Mon, 20 Nov 2023, Florian Eckert wrote:
> > 
> > > 
> > > 
> > > On 2023-11-17 13:12, Lee Jones wrote:
> > > > On Thu, 09 Nov 2023, m.brock@...mierlo.com wrote:
> > > >
> > > > > Florian Eckert schreef op 2023-11-09 09:50:
> > > > > > The serial tty interface also supports additional input signals, that
> > > > > > can also be evaluated within this trigger. This change is adding the
> > > > > > following additional input sources, which could be controlled
> > > > > > via the '/sys/class/<leds>/' sysfs interface.
> > > > > >
> > > > > > Explanation:
> > > > > > DCE = Data Communication Equipment (Modem)
> > > > > > DTE = Data Terminal Equipment (Computer)
> > > > > >
> > > > > > - cts:
> > > > > >   DCE is ready to accept data from the DTE (CTS = Clear To Send). If
> > > > > >   the line state is detected, the LED is switched on.
> > > > > >   If set to 0 (default), the LED will not evaluate CTS.
> > > > > >   If set to 1, the LED will evaluate CTS.
> > > > > >
> > > > > > - dsr:
> > > > > >   DCE is ready to receive and send data (DSR = Data Set Ready). If the
> > > > > >   line state is detected, the LED is switched on.
> > > > > >   If set to 0 (default), the LED will not evaluate DSR.
> > > > > >   If set to 1, the LED will evaluate DSR.
> > > > > >
> > > > > > - dcd:
> > > > > >   DTE is receiving a carrier from the DCE (DCD = Data Carrier Detect).
> > > > > >   If the line state is detected, the LED is switched on.
> > > > > >   If set to 0 (default), the LED will not evaluate DCD.
> > > > > >   If set to 1, the LED will evaluate DCD.
> > > > > >
> > > > > > - rng:
> > > > > >   DCE has detected an incoming ring signal on the telephone line
> > > > > >   (RNG = Ring Indicator). If the line state is detected, the LED is
> > > > > >   switched on.
> > > > > >   If set to 0 (default), the LED will not evaluate RNG.
> > > > > >   If set to 1, the LED will evaluate RNG.
> > > > > >
> > > > > > Also add an invert flag on LED blink, so that the LED blinks in the
> > > > > > correct order.
> > > > > >
> > > > > > * If one off the new enabled input signals are evaluatet as 'enabled',
> > > > > >   and data are transmitted, then the LED should first blink 'off' and
> > > > > >   then 'on' (invert).
> > > > > > * If all the new enabled input signals are evaluatet as 'disabled',
> > > > > >   and data are transmitted, then the LED should first blink 'on' and
> > > > > >   then 'off'.
> > > > > >
> > > > > > Signed-off-by: Florian Eckert <fe@....tdt.de>
> > > > > > ---
> > > > > >  .../ABI/testing/sysfs-class-led-trigger-tty   | 40 ++++++++++
> > > > > >  drivers/leds/trigger/ledtrig-tty.c            | 77 ++++++++++++++++++-
> > > > > >  2 files changed, 116 insertions(+), 1 deletion(-)
> > > >
> > > > [...]
> > > >
> > > > > Reviewed-by: Maarten Brock <m.brock@...mierlo.com>
> > > >
> > > > Please snip your replies.
> > > 
> > > Is there anything I can do? Or do I have to do something? Please
> > > give me
> > > more detailed instructions
> > 
> > That instruction wasn't for you.
> > 
> > This patch is still on my INCOMING list.
> > 
> > Do you have Greg's blessing yet?
> 
> The summary of my v8:
> 
> The changes for the tty layer on v5 in 'drivers/tty/tty_io.c' got an
> 'Acked-by: Greg Kroah-Hartman' [1].
> I have always added his 'Acked-by' to the following patch series.
> And I did not made changes to this. So I think I have his blessing
> for this changes in his maintained tty layer.
> 
> The Memory leak patch I send during v7 [2] got a comment
> from Greg, that I have to send this also to 'linux-kernel@...r-kernel.org'
> So this should go into the stable branch [3]. This got an
> 'Reviewed-by: Uwe Kleine-König' [4]. I add this to v8 [5].
> So far I don't know if this has already been merged into
> the master and then backported into the stable branches?.
> 
> For the changes in the ledtrig-tty driver I am still waiting for an
> complete 'ACK' or 'NOK' whether I should change something.
> I have added all of Greg's requested changes in v5 [6]:
> * split this series
> * Add the requested change
> * Switch the driver to use completion for 'sysfs'
> 
> As I understand it, he handed over the review to the LED subsystem team [7].
> 
> I then added a few more changes that came from Maarten in v7 [8].
> I got his 'Reviewed-by: Maarten Brock' for v8 on patch 6/6.
> 
> The patches 4/6 and 5/6 of the v8 still waiting for review?

Thanks for the update Florian.

Sounds like you're waiting on me and/or Pavel.

You're in the pile.  I'll get around to you shortly.

> [1]
> https://lore.kernel.org/linux-leds/2023102327-rename-kosher-bf03@gregkh/#t
> [2]
> https://lore.kernel.org/linux-leds/2023110629-scenic-rounding-905f@gregkh/
> [3]
> https://lore.kernel.org/linux-leds/20231106141205.3376954-1-fe@dev.tdt.de/
> [4] https://lore.kernel.org/linux-leds/20231106144914.bflq2jxejdxs6zjb@pengutronix.de/
> [5] https://lore.kernel.org/linux-leds/20231109085038.371977-1-fe@dev.tdt.de/T/#m1f0c4680749812f1a933667128f73995efe66bca
> [6]
> https://lore.kernel.org/linux-leds/2023102341-jogger-matching-dded@gregkh/
> [7]
> https://lore.kernel.org/linux-leds/2023102333-skewer-reclining-8d04@gregkh/
> [8] https://lore.kernel.org/linux-leds/bc94f31e965be6f640c286f8c8a2cf38@vanmierlo.com/
> [9] https://lore.kernel.org/linux-leds/39e7c892299c74821b1105a0967063ca@vanmierlo.com/

-- 
Lee Jones [李琼斯]

Powered by blists - more mailing lists