[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4cfad910-1821-3a31-c372-3f6b199e8f71@quicinc.com>
Date: Wed, 22 Nov 2023 18:47:43 +0530
From: Vikash Garodia <quic_vgarodia@...cinc.com>
To: Luca Weiss <luca.weiss@...rphone.com>,
Stanimir Varbanov <stanimir.k.varbanov@...il.com>,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
<cros-qcom-dts-watchers@...omium.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
CC: <~postmarketos/upstreaming@...ts.sr.ht>,
<phone-devel@...r.kernel.org>, <linux-media@...r.kernel.org>,
<linux-arm-msm@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>
Subject: Re: [PATCH v2 2/3] arm64: dts: qcom: sc7280: Move video-firmware to
chrome-common
On 10/2/2023 7:50 PM, Luca Weiss wrote:
> If the video-firmware node is present, the venus driver assumes we're on
> a system that doesn't use TZ for starting venus, like on ChromeOS
> devices.
>
> Move the video-firmware node to chrome-common.dtsi so we can use venus
> on a non-ChromeOS devices.
>
> At the same time also disable the venus node by default in the dtsi,
> like it's done on other SoCs.
>
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
> Signed-off-by: Luca Weiss <luca.weiss@...rphone.com>
> ---
> arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 8 ++++++++
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 6 ++----
> 2 files changed, 10 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
> index 5d462ae14ba1..cd491e46666d 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
> @@ -104,6 +104,14 @@ &scm {
> dma-coherent;
> };
>
> +&venus {
> + status = "okay";
> +
> + video-firmware {
> + iommus = <&apps_smmu 0x21a2 0x0>;
> + };
> +};
> +
> &watchdog {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 66f1eb83cca7..fa53f54d4675 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -3740,6 +3740,8 @@ venus: video-codec@...0000 {
> <&apps_smmu 0x2184 0x20>;
> memory-region = <&video_mem>;
>
> + status = "disabled";
> +
> video-decoder {
> compatible = "venus-decoder";
> };
> @@ -3748,10 +3750,6 @@ video-encoder {
> compatible = "venus-encoder";
> };
>
> - video-firmware {
> - iommus = <&apps_smmu 0x21a2 0x0>;
> - };
> -
> venus_opp_table: opp-table {
> compatible = "operating-points-v2";
>
>
Changes look good. Is this tested on SC7280 ?
Regards,
Vikash
Powered by blists - more mailing lists