[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <f023fbf0-3669-4617-bb60-77fde3255dc0@lunn.ch>
Date: Thu, 23 Nov 2023 20:04:17 +0100
From: Andrew Lunn <andrew@...n.ch>
To: Javier Carrasco <javier.carrasco@...fvision.net>
Cc: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Heiko Stuebner <heiko@...ech.de>,
David Wu <david.wu@...k-chips.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com
Subject: Re: [PATCH RFC WIP 0/2] net: stmmac: dwmac-rk: add support for PHY
wake on LAN
> Setting the USE_PHY_WOL flag configures the PHY as expected (its driver
> writes the MAC address and the interrupt configuration into the PHY
> registers) and an interrupt is generated with every magic packet,
> but only during normal operation i.e. there is no interrupt generation
> in suspend-to-RAM.
Do you have a logic analyser connected? Can you see if the PHY is
toggling its output pin? We then know if its a PHY problem, or a SoC
problem.
> A (probably naive) wakeup-source property in the dt node does not help.
> So now I am trying to find out why the PHY does not react in suspend and
> why its interrupt is ignored in freeze mode, but I might be overlooking
> some other important point to consider.
What is the clock setup? Sometimes the MAC gives a clock to the
PHY. Sometimes the PHY gives a lock to the MAC. If its MAC->PHY, and
this clock is getting turned off, that might cause a problem.
Andrew
Powered by blists - more mailing lists