[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <66690488f08912698301a2c203d7c562798806a2.1700737841.git.quic_jsuraj@quicinc.com>
Date: Thu, 23 Nov 2023 17:08:14 +0530
From: Suraj Jaiswal <quic_jsuraj@...cinc.com>
To: <quic_jsuraj@...cinc.com>, Vinod Koul <vkoul@...nel.org>,
Bhupesh Sharma <bhupesh.sharma@...aro.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
"Jakub Kicinski" <kuba@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
"Jose Abreu" <joabreu@...opsys.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
<netdev@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
Prasad Sodagudi <psodagud@...cinc.com>,
Andrew Halaney <ahalaney@...hat.com>
CC: <kernel@...cinc.com>
Subject: [PATCH net-next v3 2/3] arm64: dts: qcom: sa8775p: enable Fault IRQ
Add changes to support fault IRQ Handling
Support for ethernet.
Signed-off-by: Suraj Jaiswal <quic_jsuraj@...cinc.com>
---
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 13dd44dd9ed1..15155adcd200 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -2394,8 +2394,9 @@ ethernet1: ethernet@...00000 {
<0x0 0x23016000 0x0 0x100>;
reg-names = "stmmaceth", "rgmii";
- interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
+ interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>
+ <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "safety";
clocks = <&gcc GCC_EMAC1_AXI_CLK>,
<&gcc GCC_EMAC1_SLV_AHB_CLK>,
@@ -2427,8 +2428,9 @@ ethernet0: ethernet@...40000 {
<0x0 0x23056000 0x0 0x100>;
reg-names = "stmmaceth", "rgmii";
- interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
+ interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "safety";
clocks = <&gcc GCC_EMAC0_AXI_CLK>,
<&gcc GCC_EMAC0_SLV_AHB_CLK>,
--
2.25.1
Powered by blists - more mailing lists