[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231123-mbly-uart-v4-5-7f913a74ff89@bootlin.com>
Date: Thu, 23 Nov 2023 14:42:43 +0100
From: Théo Lebrun <theo.lebrun@...tlin.com>
To: Russell King <linux@...linux.org.uk>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jirislaby@...nel.org>
Cc: linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org,
Linus Walleij <linus.walleij@...aro.org>,
Grégory Clement <gregory.clement@...tlin.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Vladimir Kondratiev <vladimir.kondratiev@...ileye.com>,
Tawfik Bayouk <tawfik.bayouk@...ileye.com>,
Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>,
Théo Lebrun <theo.lebrun@...tlin.com>
Subject: [PATCH v4 5/6] tty: serial: amba-pl011: unindent
pl011_console_get_options function body
The whole function body is encapsulated inside an if-condition. Reverse
the if logic and early return to remove one indentation level.
Also turn two nested ifs into a single one at the end of the function.
Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
Signed-off-by: Théo Lebrun <theo.lebrun@...tlin.com>
---
drivers/tty/serial/amba-pl011.c | 43 ++++++++++++++++++++---------------------
1 file changed, 21 insertions(+), 22 deletions(-)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index cf9aefe2fd28..4185d6fd243b 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2369,35 +2369,34 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
static void pl011_console_get_options(struct uart_amba_port *uap, int *baud,
int *parity, int *bits)
{
- if (pl011_read(uap, REG_CR) & UART01x_CR_UARTEN) {
- unsigned int lcr_h, ibrd, fbrd;
+ unsigned int lcr_h, ibrd, fbrd;
- lcr_h = pl011_read(uap, REG_LCRH_TX);
+ if (!(pl011_read(uap, REG_CR) & UART01x_CR_UARTEN))
+ return;
- *parity = 'n';
- if (lcr_h & UART01x_LCRH_PEN) {
- if (lcr_h & UART01x_LCRH_EPS)
- *parity = 'e';
- else
- *parity = 'o';
- }
+ lcr_h = pl011_read(uap, REG_LCRH_TX);
- if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7)
- *bits = 7;
+ *parity = 'n';
+ if (lcr_h & UART01x_LCRH_PEN) {
+ if (lcr_h & UART01x_LCRH_EPS)
+ *parity = 'e';
else
- *bits = 8;
+ *parity = 'o';
+ }
- ibrd = pl011_read(uap, REG_IBRD);
- fbrd = pl011_read(uap, REG_FBRD);
+ if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7)
+ *bits = 7;
+ else
+ *bits = 8;
- *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
+ ibrd = pl011_read(uap, REG_IBRD);
+ fbrd = pl011_read(uap, REG_FBRD);
- if (uap->vendor->oversampling) {
- if (pl011_read(uap, REG_CR)
- & ST_UART011_CR_OVSFACT)
- *baud *= 2;
- }
- }
+ *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
+
+ if (uap->vendor->oversampling &&
+ (pl011_read(uap, REG_CR) & ST_UART011_CR_OVSFACT))
+ *baud *= 2;
}
static int pl011_console_setup(struct console *co, char *options)
--
2.42.0
Powered by blists - more mailing lists