[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <06c3815d-3ec7-7e2e-8ef7-6fd9caa4cf04@omp.ru>
Date: Fri, 24 Nov 2023 22:04:20 +0300
From: Sergey Shtylyov <s.shtylyov@....ru>
To: claudiu beznea <claudiu.beznea@...on.dev>, <davem@...emloft.net>,
<edumazet@...gle.com>, <kuba@...nel.org>, <pabeni@...hat.com>,
<p.zabel@...gutronix.de>, <yoshihiro.shimoda.uh@...esas.com>,
<geert+renesas@...der.be>, <wsa+renesas@...g-engineering.com>,
<biju.das.jz@...renesas.com>,
<prabhakar.mahadev-lad.rj@...renesas.com>,
<sergei.shtylyov@...entembedded.com>,
<mitsuhiro.kimura.kc@...esas.com>, <masaru.nagai.vx@...esas.com>
CC: <netdev@...r.kernel.org>, <linux-renesas-soc@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Subject: Re: [PATCH 01/13] net: ravb: Check return value of
reset_control_deassert()
On 11/21/23 8:59 AM, claudiu beznea wrote:
[...]
>>> From: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
>>>
>>> reset_control_deassert() could return an error. Some devices cannot work
>>> if reset signal de-assert operation fails. To avoid this check the return
>>> code of reset_control_deassert() in ravb_probe() and take proper action.
>>>
>>> Fixes: 0d13a1a464a0 ("ravb: Add reset support")
>>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
>>> ---
>>> drivers/net/ethernet/renesas/ravb_main.c | 7 ++++++-
>>> 1 file changed, 6 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
>>> index c70cff80cc99..342978bdbd7e 100644
>>> --- a/drivers/net/ethernet/renesas/ravb_main.c
>>> +++ b/drivers/net/ethernet/renesas/ravb_main.c
>>> @@ -2645,7 +2645,12 @@ static int ravb_probe(struct platform_device *pdev)
>>> ndev->features = info->net_features;
>>> ndev->hw_features = info->net_hw_features;
>>>
>>> - reset_control_deassert(rstc);
>>> + error = reset_control_deassert(rstc);
>>> + if (error) {
>>> + free_netdev(ndev);
>>> + return error;
>>
>> No, please use *goto* here. And please fix up the order of statements under
>> the out_release label before doing that.
>
> This will lead to a bit more complicated patch, AFAICT. I tried to keep it
It's OK! :-)
> simple for a fix. Same thing for patch 2.
Patch 2 is not as simple as it could have been...
[...]
MBR, Sergey
Powered by blists - more mailing lists