[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231124192558.135004-5-jankul@alatek.krakow.pl>
Date: Fri, 24 Nov 2023 20:25:57 +0100
From: Jan Kuliga <jankul@...tek.krakow.pl>
To: lizhi.hou@....com, brian.xu@....com, raj.kumar.rampelli@....com,
vkoul@...nel.org, michal.simek@....com, dmaengine@...r.kernel.org,
linux-kernel@...r.kernel.org, runtimeca39d@....com
Cc: Jan Kuliga <jankul@...tek.krakow.pl>
Subject: [PATCH v3 4/5] dmaengine: xilinx: xdma: Rework xdma_channel_isr()
The xdma's channel status register may be read and cleared
simultaneously, by accesing it via seperate XDMA_CHAN_STATUS_RC
register. Therefore, it is possible to simplify the code
by just getting rid of a seperate redundant write.
Also, implement the actual status register checking as well.
Previously, the cyclic callback would be scheduled regardless of the
status register state. Fix it.
Signed-off-by: Jan Kuliga <jankul@...tek.krakow.pl>
---
drivers/dma/xilinx/xdma-regs.h | 2 ++
drivers/dma/xilinx/xdma.c | 16 ++++++++--------
2 files changed, 10 insertions(+), 8 deletions(-)
diff --git a/drivers/dma/xilinx/xdma-regs.h b/drivers/dma/xilinx/xdma-regs.h
index 654c5e41112d..6bf7ae84e452 100644
--- a/drivers/dma/xilinx/xdma-regs.h
+++ b/drivers/dma/xilinx/xdma-regs.h
@@ -116,6 +116,8 @@ struct xdma_hw_desc {
CHAN_CTRL_IE_WRITE_ERROR | \
CHAN_CTRL_IE_DESC_ERROR)
+#define XDMA_CHAN_STATUS_MASK CHAN_CTRL_START
+
/* bits of the channel interrupt enable mask */
#define CHAN_IM_DESC_ERROR BIT(19)
#define CHAN_IM_READ_ERROR BIT(9)
diff --git a/drivers/dma/xilinx/xdma.c b/drivers/dma/xilinx/xdma.c
index b8de15e3dcfc..de4615bd4ee5 100644
--- a/drivers/dma/xilinx/xdma.c
+++ b/drivers/dma/xilinx/xdma.c
@@ -814,15 +814,15 @@ static irqreturn_t xdma_channel_isr(int irq, void *dev_id)
desc->completed_desc_num += complete_desc_num;
- if (desc->cyclic) {
- ret = regmap_read(xdev->rmap, xchan->base + XDMA_CHAN_STATUS,
- &st);
- if (ret)
- goto out;
-
- regmap_write(xdev->rmap, xchan->base + XDMA_CHAN_STATUS, st);
+ /* clear-on-read the status register */
+ ret = regmap_read(xdev->rmap, xchan->base + XDMA_CHAN_STATUS_RC, &st);
+ if (ret)
+ goto out;
- vchan_cyclic_callback(vd);
+ if (desc->cyclic) {
+ st &= XDMA_CHAN_STATUS_MASK;
+ if (st & CHAN_CTRL_IE_DESC_COMPLETED)
+ vchan_cyclic_callback(vd);
goto out;
}
--
2.34.1
Powered by blists - more mailing lists