[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1700864395-1479-2-git-send-email-quic_mojha@quicinc.com>
Date: Sat, 25 Nov 2023 03:49:44 +0530
From: Mukesh Ojha <quic_mojha@...cinc.com>
To: <corbet@....net>, <agross@...nel.org>, <andersson@...nel.org>,
<konrad.dybcio@...aro.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
<keescook@...omium.org>, <tony.luck@...el.com>,
<gpiccoli@...lia.com>, <mathieu.poirier@...aro.org>,
<vigneshr@...com>, <nm@...com>, <matthias.bgg@...il.com>,
<kgene@...nel.org>, <alim.akhtar@...sung.com>, <bmasney@...hat.com>
CC: <linux-doc@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-msm@...r.kernel.org>, <linux-hardening@...r.kernel.org>,
<linux-remoteproc@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-samsung-soc@...r.kernel.org>, <kernel@...cinc.com>,
Mukesh Ojha <quic_mojha@...cinc.com>
Subject: [Patch v6 01/12] firmware: qcom_scm: Refactor code to support multiple dload mode
Currently on Qualcomm SoC, download_mode is enabled if
CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is selected.
Refactor the code such that it supports multiple download
modes and drop CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT config
instead, give interface to set the download mode from
module parameter.
Signed-off-by: Mukesh Ojha <quic_mojha@...cinc.com>
---
drivers/firmware/qcom/Kconfig | 11 --------
drivers/firmware/qcom/qcom_scm.c | 58 +++++++++++++++++++++++++++++++++-------
2 files changed, 49 insertions(+), 20 deletions(-)
diff --git a/drivers/firmware/qcom/Kconfig b/drivers/firmware/qcom/Kconfig
index 3f05d9854ddf..3bbbaef145ad 100644
--- a/drivers/firmware/qcom/Kconfig
+++ b/drivers/firmware/qcom/Kconfig
@@ -9,17 +9,6 @@ menu "Qualcomm firmware drivers"
config QCOM_SCM
tristate
-config QCOM_SCM_DOWNLOAD_MODE_DEFAULT
- bool "Qualcomm download mode enabled by default"
- depends on QCOM_SCM
- help
- A device with "download mode" enabled will upon an unexpected
- warm-restart enter a special debug mode that allows the user to
- "download" memory content over USB for offline postmortem analysis.
- The feature can be enabled/disabled on the kernel command line.
-
- Say Y here to enable "download mode" by default.
-
config QCOM_QSEECOM
bool "Qualcomm QSEECOM interface driver"
depends on QCOM_SCM=y
diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
index 87bcd5c02f2b..c5878c38f378 100644
--- a/drivers/firmware/qcom/qcom_scm.c
+++ b/drivers/firmware/qcom/qcom_scm.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/interconnect.h>
#include <linux/interrupt.h>
+#include <linux/kstrtox.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
@@ -27,8 +28,7 @@
#include "qcom_scm.h"
-static bool download_mode = IS_ENABLED(CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT);
-module_param(download_mode, bool, 0);
+static u32 download_mode;
struct qcom_scm {
struct device *dev;
@@ -132,6 +132,11 @@ static const char * const qcom_scm_convention_names[] = {
[SMC_CONVENTION_LEGACY] = "smc legacy",
};
+static const char * const download_mode_name[] = {
+ [QCOM_DLOAD_NODUMP] = "off",
+ [QCOM_DLOAD_FULLDUMP] = "full",
+};
+
static struct qcom_scm *__scm;
static int qcom_scm_clk_enable(void)
@@ -529,19 +534,18 @@ static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
return qcom_scm_call_atomic(__scm->dev, &desc, NULL);
}
-static void qcom_scm_set_download_mode(bool enable)
+static void qcom_scm_set_download_mode(u32 download_mode)
{
- u32 val = enable ? QCOM_DLOAD_FULLDUMP : QCOM_DLOAD_NODUMP;
int ret = 0;
if (__scm->dload_mode_addr) {
ret = qcom_scm_io_rmw(__scm->dload_mode_addr,
QCOM_DLOAD_MASK,
- FIELD_PREP(QCOM_DLOAD_MASK, val));
+ FIELD_PREP(QCOM_DLOAD_MASK, download_mode));
} else if (__qcom_scm_is_call_available(__scm->dev,
QCOM_SCM_SVC_BOOT,
QCOM_SCM_BOOT_SET_DLOAD_MODE)) {
- ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
+ ret = __qcom_scm_set_dload_mode(__scm->dev, !!download_mode);
} else {
dev_err(__scm->dev,
"No available mechanism for setting download mode\n");
@@ -1843,6 +1847,42 @@ static irqreturn_t qcom_scm_irq_handler(int irq, void *data)
return IRQ_HANDLED;
}
+static int get_download_mode(char *buffer, const struct kernel_param *kp)
+{
+ if (download_mode >= ARRAY_SIZE(download_mode_name))
+ return sysfs_emit(buffer, "unknown mode\n");
+
+ return sysfs_emit(buffer, "%s\n", download_mode_name[download_mode]);
+}
+
+static int set_download_mode(const char *val, const struct kernel_param *kp)
+{
+ u32 old = download_mode;
+ int ret;
+
+ ret = sysfs_match_string(download_mode_name, val);
+ if (ret < 0) {
+ download_mode = old;
+ pr_err("qcom_scm: unknown download mode: %s\n", val);
+ return -EINVAL;
+ }
+
+ download_mode = ret;
+ if (__scm)
+ qcom_scm_set_download_mode(download_mode);
+
+ return 0;
+}
+
+static const struct kernel_param_ops download_mode_param_ops = {
+ .get = get_download_mode,
+ .set = set_download_mode,
+};
+
+module_param_cb(download_mode, &download_mode_param_ops, NULL, 0644);
+MODULE_PARM_DESC(download_mode,
+ "download mode: off/full are acceptable values");
+
static int qcom_scm_probe(struct platform_device *pdev)
{
struct qcom_scm *scm;
@@ -1907,12 +1947,12 @@ static int qcom_scm_probe(struct platform_device *pdev)
__get_convention();
/*
- * If requested enable "download mode", from this point on warmboot
+ * If "download mode" is requested, from this point on warmboot
* will cause the boot stages to enter download mode, unless
* disabled below by a clean shutdown/reboot.
*/
if (download_mode)
- qcom_scm_set_download_mode(true);
+ qcom_scm_set_download_mode(download_mode);
/*
@@ -1940,7 +1980,7 @@ static int qcom_scm_probe(struct platform_device *pdev)
static void qcom_scm_shutdown(struct platform_device *pdev)
{
/* Clean shutdown, disable download mode to allow normal restart */
- qcom_scm_set_download_mode(false);
+ qcom_scm_set_download_mode(QCOM_DLOAD_NODUMP);
}
static const struct of_device_id qcom_scm_dt_match[] = {
--
2.7.4
Powered by blists - more mailing lists