| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZWBMyPIPwq9L-5pG@archie.me>
Date: Fri, 24 Nov 2023 14:12:08 +0700
From: Bagas Sanjaya <bagasdotme@...il.com>
To: Tudor Ambarus <tudor.ambarus@...aro.org>, pratyush@...nel.org,
michael@...le.cc
Cc: Linux MTD <linux-mtd@...ts.infradead.org>,
Linux Documentation <linux-doc@...r.kernel.org>,
corbet@....net,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/2] docs: mtd: spi-nor: add sections about flash
additions and testing
On Thu, Nov 23, 2023 at 06:07:20PM +0200, Tudor Ambarus wrote:
> +Minimum testing requirements
> +-----------------------------
> +
> +Do all the tests from below and paste them in the commit's comments
> +section, after the ``---`` marker.
> +
> +1/ Specify the controller that you used to test the flash and specify
> +the frequency at which the flash was operated::
> +
> + E.g. This flash is populated on the X board and was tested at Y
> + frequency using the Z (put compatible) SPI controller.
> +
> +2/ Dump the sysfs entries and print the md5/sha1/sha256 SFDP checksum::
> +
> + root@1:~# cat /sys/bus/spi/devices/spi1.0/spi-nor/partname
> + sst26vf064b
> + root@1:~# cat /sys/bus/spi/devices/spi1.0/spi-nor/jedec_id
> + bf2643
> + root@1:~# cat /sys/bus/spi/devices/spi1.0/spi-nor/manufacturer
> + sst
> + root@1:~# hexdump -C /sys/bus/spi/devices/spi1.0/spi-nor/sfdp
> + 00000000 53 46 44 50 06 01 02 ff 00 06 01 10 30 00 00 ff |SFDP........0...|
> + 00000010 81 00 01 06 00 01 00 ff bf 00 01 18 00 02 00 01 |................|
> + 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
> + 00000030 fd 20 f1 ff ff ff ff 03 44 eb 08 6b 08 3b 80 bb |. ......D..k.;..|
> + 00000040 fe ff ff ff ff ff 00 ff ff ff 44 0b 0c 20 0d d8 |..........D.. ..|
> + 00000050 0f d8 10 d8 20 91 48 24 80 6f 1d 81 ed 0f 77 38 |.... .H$.o....w8|
> + 00000060 30 b0 30 b0 f7 ff ff ff 29 c2 5c ff f0 30 c0 80 |0.0.....).\..0..|
> + 00000070 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
> + *
> + 00000100 ff 00 04 ff f3 7f 00 00 f5 7f 00 00 f9 ff 7d 00 |..............}.|
> + 00000110 f5 7f 00 00 f3 7f 00 00 ff ff ff ff ff ff ff ff |................|
> + 00000120 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
> + *
> + 00000200 bf 26 43 ff b9 5f fd ff 30 f2 60 f3 32 ff 0a 12 |.&C.._..0.`.2...|
> + 00000210 23 46 ff 0f 19 32 0f 19 19 ff ff ff ff ff ff ff |#F...2..........|
> + 00000220 00 66 99 38 ff 05 01 35 06 04 02 32 b0 30 72 42 |.f.8...5...2.0rB|
> + 00000230 8d e8 98 88 a5 85 c0 9f af 5a ff ff 06 ec 06 0c |.........Z......|
> + 00000240 00 03 08 0b ff ff ff ff ff 07 ff ff 02 02 ff 06 |................|
> + 00000250 03 00 fd fd 04 07 00 fc 03 00 fe fe 02 02 07 0e |................|
> + 00000260
> + root@1:~# sha256sum /sys/bus/spi/devices/spi1.0/spi-nor/sfdp
> + 428f34d0461876f189ac97f93e68a05fa6428c6650b3b7baf736a921e5898ed1 /sys/bus/spi/devices/spi1.0/spi-nor/sfdp
> +
> +3/ Dump debugfs data::
> +
> + root@1:~# cat /sys/kernel/debug/spi-nor/spi1.0/capabilities
> + Supported read modes by the flash
> + 1S-1S-1S
> + opcode 0x03
> + mode cycles 0
> + dummy cycles 0
> + 1S-1S-1S (fast read)
> + opcode 0x0b
> + mode cycles 0
> + dummy cycles 8
> + 1S-1S-2S
> + opcode 0x3b
> + mode cycles 0
> + dummy cycles 8
> + 1S-2S-2S
> + opcode 0xbb
> + mode cycles 4
> + dummy cycles 0
> + 1S-1S-4S
> + opcode 0x6b
> + mode cycles 0
> + dummy cycles 8
> + 1S-4S-4S
> + opcode 0xeb
> + mode cycles 2
> + dummy cycles 4
> + 4S-4S-4S
> + opcode 0x0b
> + mode cycles 2
> + dummy cycles 4
> +
> + Supported page program modes by the flash
> + 1S-1S-1S
> + opcode 0x02
> +
> + root@1:~# cat /sys/kernel/debug/spi-nor/spi1.0/params
> + name sst26vf064b
> + id bf 26 43 bf 26 43
> + size 8.00 MiB
> + write size 1
> + page size 256
> + address nbytes 3
> + flags HAS_LOCK | HAS_16BIT_SR | SOFT_RESET | SWP_IS_VOLATILE
> +
> + opcodes
> + read 0xeb
> + dummy cycles 6
> + erase 0x20
> + program 0x02
> + 8D extension none
> +
> + protocols
> + read 1S-4S-4S
> + write 1S-1S-1S
> + register 1S-1S-1S
> +
> + erase commands
> + 20 (4.00 KiB) [0]
> + d8 (8.00 KiB) [1]
> + d8 (32.0 KiB) [2]
> + d8 (64.0 KiB) [3]
> + c7 (8.00 MiB)
> +
> + sector map
> + region (in hex) | erase mask | flags
> + ------------------+------------+----------
> + 00000000-00007fff | [01 ] |
> + 00008000-0000ffff | [0 2 ] |
> + 00010000-007effff | [0 3] |
> + 007f0000-007f7fff | [0 2 ] |
> + 007f8000-007fffff | [01 ] |
> +
> +4/ Use `mtd-utils <https://git.infradead.org/mtd-utils.git>`__
> +and verify that erase, read and page program operations work fine.
> +
> +a/ Generate a 2 MB file::
> +
> + root@1:~# dd if=/dev/urandom of=./spi_test bs=1M count=2
> + 2+0 records in
> + 2+0 records out
> + 2097152 bytes (2.1 MB, 2.0 MiB) copied, 0.848566 s, 2.5 MB/s
> +
> +b/ Verify erase::
> +
> + root@1:~# mtd_debug write /dev/mtd1 0 2097152 spi_test
> + Copied 2097152 bytes from spi_test to address 0x00000000 in flash
> +
> + root@1:~# mtd_debug erase /dev/mtd1 0 2097152
> + Erased 2097152 bytes from address 0x00000000 in flash
> +
> + root@1:~# mtd_debug read /dev/mtd1 0 2097152 spi_read
> + Copied 2097152 bytes from address 0x00000000 in flash to spi_read
> +
> + root@1:~# hexdump -C spi_read
> + 00000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
> + *
> + 00200000
> +
> +c/ Write, read back and compare::
> +
> + root@1:~# mtd_debug write /dev/mtd1 0 2097152 spi_test
> + Copied 2097152 bytes from spi_test to address 0x00000000 in flash
> +
> + root@1:~# mtd_debug read /dev/mtd1 0 2097152 spi_read
> + Copied 2097152 bytes from address 0x00000000 in flash to spi_read
> +
> + root@1:~# sha1sum spi_*
> + 51eeddc316a4121cf96e76e526d94d638283ec22 spi_read
> + 51eeddc316a4121cf96e76e526d94d638283ec22 spi_test
> +
> +d/ Dump mtd_info data::
> +
> + root@1:~# mtd_debug info /dev/mtd1
> + mtd.type = MTD_NORFLASH
> + mtd.flags = MTD_CAP_NORFLASH
> + mtd.size = 8388608 (8M)
> + mtd.erasesize = 4096 (4K)
> + mtd.writesize = 1
> + mtd.oobsize = 0
> + regions = 0
The numbered lists don't properly rendered, so I have to fix it up:
---- >8 ----
diff --git a/Documentation/driver-api/mtd/spi-nor.rst b/Documentation/driver-api/mtd/spi-nor.rst
index 7a8737fe181de5..d482658628b3c0 100644
--- a/Documentation/driver-api/mtd/spi-nor.rst
+++ b/Documentation/driver-api/mtd/spi-nor.rst
@@ -30,13 +30,13 @@ Minimum testing requirements
Do all the tests from below and paste them in the commit's comments
section, after the ``---`` marker.
-1/ Specify the controller that you used to test the flash and specify
-the frequency at which the flash was operated::
+1) Specify the controller that you used to test the flash and specify
+ the frequency at which the flash was operated, e.g.::
- E.g. This flash is populated on the X board and was tested at Y
+ This flash is populated on the X board and was tested at Y
frequency using the Z (put compatible) SPI controller.
-2/ Dump the sysfs entries and print the md5/sha1/sha256 SFDP checksum::
+2) Dump the sysfs entries and print the md5/sha1/sha256 SFDP checksum::
root@1:~# cat /sys/bus/spi/devices/spi1.0/spi-nor/partname
sst26vf064b
@@ -68,7 +68,7 @@ the frequency at which the flash was operated::
root@1:~# sha256sum /sys/bus/spi/devices/spi1.0/spi-nor/sfdp
428f34d0461876f189ac97f93e68a05fa6428c6650b3b7baf736a921e5898ed1 /sys/bus/spi/devices/spi1.0/spi-nor/sfdp
-3/ Dump debugfs data::
+3) Dump debugfs data::
root@1:~# cat /sys/kernel/debug/spi-nor/spi1.0/capabilities
Supported read modes by the flash
@@ -142,51 +142,51 @@ the frequency at which the flash was operated::
007f0000-007f7fff | [0 2 ] |
007f8000-007fffff | [01 ] |
-4/ Use `mtd-utils <https://git.infradead.org/mtd-utils.git>`__
-and verify that erase, read and page program operations work fine.
+4) Use `mtd-utils <https://git.infradead.org/mtd-utils.git>`__
+and verify that erase, read and page program operations work fine:
-a/ Generate a 2 MB file::
+ a) Generate a 2 MB file::
- root@1:~# dd if=/dev/urandom of=./spi_test bs=1M count=2
- 2+0 records in
- 2+0 records out
- 2097152 bytes (2.1 MB, 2.0 MiB) copied, 0.848566 s, 2.5 MB/s
+ root@1:~# dd if=/dev/urandom of=./spi_test bs=1M count=2
+ 2+0 records in
+ 2+0 records out
+ 2097152 bytes (2.1 MB, 2.0 MiB) copied, 0.848566 s, 2.5 MB/s
-b/ Verify erase::
+ b) Verify erase::
- root@1:~# mtd_debug write /dev/mtd1 0 2097152 spi_test
- Copied 2097152 bytes from spi_test to address 0x00000000 in flash
+ root@1:~# mtd_debug write /dev/mtd1 0 2097152 spi_test
+ Copied 2097152 bytes from spi_test to address 0x00000000 in flash
- root@1:~# mtd_debug erase /dev/mtd1 0 2097152
- Erased 2097152 bytes from address 0x00000000 in flash
+ root@1:~# mtd_debug erase /dev/mtd1 0 2097152
+ Erased 2097152 bytes from address 0x00000000 in flash
- root@1:~# mtd_debug read /dev/mtd1 0 2097152 spi_read
- Copied 2097152 bytes from address 0x00000000 in flash to spi_read
+ root@1:~# mtd_debug read /dev/mtd1 0 2097152 spi_read
+ Copied 2097152 bytes from address 0x00000000 in flash to spi_read
- root@1:~# hexdump -C spi_read
- 00000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
- *
- 00200000
+ root@1:~# hexdump -C spi_read
+ 00000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
+ *
+ 00200000
-c/ Write, read back and compare::
+ c) Write, read back and compare::
- root@1:~# mtd_debug write /dev/mtd1 0 2097152 spi_test
- Copied 2097152 bytes from spi_test to address 0x00000000 in flash
+ root@1:~# mtd_debug write /dev/mtd1 0 2097152 spi_test
+ Copied 2097152 bytes from spi_test to address 0x00000000 in flash
- root@1:~# mtd_debug read /dev/mtd1 0 2097152 spi_read
- Copied 2097152 bytes from address 0x00000000 in flash to spi_read
+ root@1:~# mtd_debug read /dev/mtd1 0 2097152 spi_read
+ Copied 2097152 bytes from address 0x00000000 in flash to spi_read
- root@1:~# sha1sum spi_*
- 51eeddc316a4121cf96e76e526d94d638283ec22 spi_read
- 51eeddc316a4121cf96e76e526d94d638283ec22 spi_test
+ root@1:~# sha1sum spi_*
+ 51eeddc316a4121cf96e76e526d94d638283ec22 spi_read
+ 51eeddc316a4121cf96e76e526d94d638283ec22 spi_test
-d/ Dump mtd_info data::
+ d) Dump mtd_info data::
- root@1:~# mtd_debug info /dev/mtd1
- mtd.type = MTD_NORFLASH
- mtd.flags = MTD_CAP_NORFLASH
- mtd.size = 8388608 (8M)
- mtd.erasesize = 4096 (4K)
- mtd.writesize = 1
- mtd.oobsize = 0
- regions = 0
+ root@1:~# mtd_debug info /dev/mtd1
+ mtd.type = MTD_NORFLASH
+ mtd.flags = MTD_CAP_NORFLASH
+ mtd.size = 8388608 (8M)
+ mtd.erasesize = 4096 (4K)
+ mtd.writesize = 1
+ mtd.oobsize = 0
+ regions = 0
Thanks.
--
An old man doll... just what I always wanted! - Clara
Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)
Powered by blists - more mailing lists