[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231124084725.12738-8-ilpo.jarvinen@linux.intel.com>
Date: Fri, 24 Nov 2023 10:47:22 +0200
From: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To: "John W. Linville" <linville@...driver.com>,
Kalle Valo <kvalo@...nel.org>,
Larry Finger <Larry.Finger@...inger.net>,
linux-wireless@...r.kernel.org, Ping-Ke Shih <pkshih@...ltek.com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
linux-kernel@...r.kernel.org
Cc: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
Subject: [PATCH v2 07/10] wifi: rtlwifi: rtl8821ae: Add pdev into _rtl8821ae_clear_pci_pme_status()
Add local variable pdev to shorten rtlpci->pdev.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
---
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
index 7877509c34c7..7cc648d49f2d 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
@@ -2270,10 +2270,11 @@ static void _rtl8821ae_clear_pci_pme_status(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct pci_dev *pdev = rtlpci->pdev;
u8 pmcs_reg;
u8 pm_cap;
- pm_cap = pci_find_capability(rtlpci->pdev, PCI_CAP_ID_PM);
+ pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
if (!pm_cap) {
rtl_dbg(rtlpriv, COMP_INIT, DBG_WARNING,
"Cannot find PME Capability\n");
@@ -2283,13 +2284,13 @@ static void _rtl8821ae_clear_pci_pme_status(struct ieee80211_hw *hw)
/* Get the PM CSR (Control/Status Register),
* The PME_Status is located at PM Capatibility offset 5, bit 7
*/
- pci_read_config_byte(rtlpci->pdev, pm_cap + 5, &pmcs_reg);
+ pci_read_config_byte(pdev, pm_cap + 5, &pmcs_reg);
if (pmcs_reg & BIT(7)) {
/* Clear PME_Status with write */
- pci_write_config_byte(rtlpci->pdev, pm_cap + 5, pmcs_reg);
+ pci_write_config_byte(pdev, pm_cap + 5, pmcs_reg);
/* Read it back to check */
- pci_read_config_byte(rtlpci->pdev, pm_cap + 5, &pmcs_reg);
+ pci_read_config_byte(pdev, pm_cap + 5, &pmcs_reg);
rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG,
"Clear PME status 0x%2x to 0x%2x\n",
pm_cap + 5, pmcs_reg);
--
2.30.2
Powered by blists - more mailing lists