lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231124092121.16866-1-krzysztof.kozlowski@linaro.org>
Date:   Fri, 24 Nov 2023 10:21:21 +0100
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Stephen Boyd <sboyd@...nel.org>, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
        linux-iio@...r.kernel.org, linux-mmc@...r.kernel.org,
        netdev@...r.kernel.org, linux-pci@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-renesas-soc@...r.kernel.org, linux-gpio@...r.kernel.org,
        linux-pm@...r.kernel.org, linux-remoteproc@...r.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH] dt-bindings: correct white-spaces in examples

Use only one and exactly one space around '=' in DTS example.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>

---

Merging idea: Rob's DT.
Should apply cleanly on Rob's for-next.
---
 .../devicetree/bindings/auxdisplay/hit,hd44780.yaml       | 2 +-
 .../devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml     | 2 +-
 Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 6 +++---
 .../devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml       | 2 +-
 .../devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml      | 2 +-
 .../interrupt-controller/st,stih407-irq-syscfg.yaml       | 4 ++--
 Documentation/devicetree/bindings/mmc/arm,pl18x.yaml      | 2 +-
 Documentation/devicetree/bindings/net/sff,sfp.yaml        | 2 +-
 .../devicetree/bindings/pci/toshiba,visconti-pcie.yaml    | 2 +-
 .../bindings/pinctrl/renesas,rzg2l-pinctrl.yaml           | 6 +++---
 .../devicetree/bindings/power/supply/richtek,rt9455.yaml  | 8 ++++----
 .../devicetree/bindings/regulator/mps,mp5416.yaml         | 4 ++--
 .../devicetree/bindings/regulator/mps,mpq7920.yaml        | 4 ++--
 .../devicetree/bindings/remoteproc/fsl,imx-rproc.yaml     | 8 ++++----
 14 files changed, 27 insertions(+), 27 deletions(-)

diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
index fde07e4b119d..406a922a714e 100644
--- a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
@@ -113,7 +113,7 @@ examples:
     hd44780 {
             compatible = "hit,hd44780";
             display-height-chars = <2>;
-            display-width-chars  = <16>;
+            display-width-chars = <16>;
             data-gpios = <&pcf8574 4 0>,
                          <&pcf8574 5 0>,
                          <&pcf8574 6 0>,
diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
index 624984d51c10..7f8d98226437 100644
--- a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
+++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
@@ -125,7 +125,7 @@ examples:
     clk25m: clock-oscillator-25m {
       compatible = "fixed-clock";
       #clock-cells = <0>;
-      clock-frequency  = <25000000>;
+      clock-frequency = <25000000>;
       clock-output-names = "clk25m";
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
index 5fcc8dd012f1..be2616ff9af6 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
@@ -80,9 +80,9 @@ examples:
             compatible = "adi,ad7780";
             reg = <0>;
 
-            avdd-supply      = <&vdd_supply>;
-            powerdown-gpios  = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-            adi,gain-gpios   = <&gpio1  5 GPIO_ACTIVE_LOW>;
+            avdd-supply = <&vdd_supply>;
+            powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+            adi,gain-gpios = <&gpio1  5 GPIO_ACTIVE_LOW>;
             adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
index 73def67fbe01..b6a233cd5f6b 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
@@ -58,7 +58,7 @@ examples:
             reg = <0x3600>;
             interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
             qcom,external-resistor-micro-ohms = <10000>;
-            #io-channel-cells  = <1>;
+            #io-channel-cells = <1>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
index b3a626389870..64abe9a4cd9e 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
@@ -46,6 +46,6 @@ examples:
         pmic_rradc: adc@...0 {
             compatible = "qcom,pmi8998-rradc";
             reg = <0x4500>;
-            #io-channel-cells  = <1>;
+            #io-channel-cells = <1>;
         };
     };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml
index 2b153d7c5421..e44e4e5708a7 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml
@@ -55,8 +55,8 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/irq-st.h>
     irq-syscfg {
-        compatible    = "st,stih407-irq-syscfg";
-        st,syscfg     = <&syscfg_cpu>;
+        compatible = "st,stih407-irq-syscfg";
+        st,syscfg = <&syscfg_cpu>;
         st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
                         <ST_IRQ_SYSCFG_PMU_1>;
         st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
index 2459a55ed540..940b12688167 100644
--- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
+++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
@@ -203,7 +203,7 @@ examples:
       bus-width = <4>;
       cap-sd-highspeed;
       cap-mmc-highspeed;
-      cd-gpios  = <&gpio2 31 0x4>;
+      cd-gpios = <&gpio2 31 0x4>;
       st,sig-dir-dat0;
       st,sig-dir-dat2;
       st,sig-dir-cmd;
diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml
index 973e478a399d..bf6cbc7c2ba3 100644
--- a/Documentation/devicetree/bindings/net/sff,sfp.yaml
+++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml
@@ -120,7 +120,7 @@ examples:
       pinctrl-names = "default";
       pinctrl-0 = <&cps_sfpp0_pins>;
       tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>;
-      tx-fault-gpios  = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>;
+      tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>;
     };
 
     mdio {
diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
index 53da2edd7c9a..120e3bb1e545 100644
--- a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
@@ -83,7 +83,7 @@ examples:
                   <0x0 0x28050000 0x0 0x00010000>,
                   <0x0 0x24200000 0x0 0x00002000>,
                   <0x0 0x24162000 0x0 0x00001000>;
-            reg-names  = "dbi", "config", "ulreg", "smu", "mpu";
+            reg-names = "dbi", "config", "ulreg", "smu", "mpu";
             device_type = "pci";
             bus-range = <0x00 0xff>;
             num-lanes = <2>;
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index b5ca40d0e251..d476de82e5c3 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -185,17 +185,17 @@ examples:
                     sd1_mux {
                             pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>, /* CD */
                                      <RZG2L_PORT_PINMUX(19, 1, 1)>; /* WP */
-                            power-source  = <3300>;
+                            power-source = <3300>;
                     };
 
                     sd1_data {
                             pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
-                            power-source  = <3300>;
+                            power-source = <3300>;
                     };
 
                     sd1_ctrl {
                             pins = "SD1_CLK", "SD1_CMD";
-                            power-source  = <3300>;
+                            power-source = <3300>;
                     };
             };
     };
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
index 07e38be39f1b..89f9603499b4 100644
--- a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
@@ -79,10 +79,10 @@ examples:
         interrupt-parent = <&gpio1>;
         interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 
-        richtek,output-charge-current	    = <500000>;
-        richtek,end-of-charge-percentage    = <10>;
-        richtek,battery-regulation-voltage  = <4200000>;
-        richtek,boost-output-voltage	    = <5050000>;
+        richtek,output-charge-current = <500000>;
+        richtek,end-of-charge-percentage = <10>;
+        richtek,battery-regulation-voltage = <4200000>;
+        richtek,boost-output-voltage = <5050000>;
 
         richtek,min-input-voltage-regulation = <4500000>;
         richtek,avg-input-current-regulation = <500000>;
diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
index 0221397eb51e..f825ee9efd81 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
@@ -62,8 +62,8 @@ examples:
              regulator-name = "buck1";
              regulator-min-microvolt = <600000>;
              regulator-max-microvolt = <2187500>;
-             regulator-min-microamp  = <3800000>;
-             regulator-max-microamp  = <6800000>;
+             regulator-min-microamp = <3800000>;
+             regulator-max-microamp = <6800000>;
              regulator-boot-on;
             };
 
diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
index 6de5b027f990..0d34af98403f 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
@@ -98,8 +98,8 @@ examples:
              regulator-name = "buck1";
              regulator-min-microvolt = <400000>;
              regulator-max-microvolt = <3587500>;
-             regulator-min-microamp  = <460000>;
-             regulator-max-microamp  = <7600000>;
+             regulator-min-microamp = <460000>;
+             regulator-max-microamp = <7600000>;
              regulator-boot-on;
              mps,buck-ovp-disable;
              mps,buck-phase-delay = /bits/ 8 <2>;
diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
index 30632efdad8b..df36e29d974c 100644
--- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
@@ -113,10 +113,10 @@ examples:
     };
 
     imx7d-cm4 {
-      compatible	= "fsl,imx7d-cm4";
-      memory-region	= <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>;
-      syscon		= <&src>;
-      clocks		= <&clks IMX7D_ARM_M4_ROOT_CLK>;
+      compatible = "fsl,imx7d-cm4";
+      memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>;
+      syscon = <&src>;
+      clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>;
     };
 
   - |
-- 
2.34.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ