linux-kernel - Re: [PATCH net-next 9/9] net: pse-pd: Add PD692x0 PSE controller driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231124163054.GQ50352@kernel.org>
Date:   Fri, 24 Nov 2023 16:30:54 +0000
From:   Simon Horman <horms@...nel.org>
To:     Kory Maincent <kory.maincent@...tlin.com>
Cc:     "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Jonathan Corbet <corbet@....net>,
        Luis Chamberlain <mcgrof@...nel.org>,
        Russ Weight <russ.weight@...ux.dev>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        "Rafael J. Wysocki" <rafael@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-doc@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH net-next 9/9] net: pse-pd: Add PD692x0 PSE controller
 driver

On Thu, Nov 16, 2023 at 03:01:41PM +0100, Kory Maincent wrote:
> Add a new driver for the PD692x0 I2C Power Sourcing Equipment controller.
> This driver only support i2c communication for now.
> 
> Signed-off-by: Kory Maincent <kory.maincent@...tlin.com>

Hi Kory,

some minor feedback from my side.

...

> diff --git a/drivers/net/pse-pd/pd692x0.c b/drivers/net/pse-pd/pd692x0.c

...

> +static int
> +pd692x0_get_of_matrix(struct device *dev,
> +		      struct matrix port_matrix[PD692X0_MAX_LOGICAL_PORTS])
> +{
> +	int ret, i, ports_matrix_size;
> +	u32 val[PD692X0_MAX_LOGICAL_PORTS * 3];

nit: reverse xmas tree please.

...

> +static int pd692x0_fw_write_line(const struct i2c_client *client,
> +				 const char line[PD692X0_FW_LINE_MAX_SZ],
> +				 const bool last_line)
> +{
> +	int ret;
> +
> +	while (*line != 0) {
> +		ret = i2c_master_send(client, line, 1);
> +		if (ret < 0)
> +			return FW_UPLOAD_ERR_RW_ERROR;
> +		line++;
> +	}
> +
> +	if (last_line) {
> +		ret = pd692x0_fw_recv_resp(client, 100, "TP\r\n",
> +					   sizeof("TP\r\n") - 1);
> +		if (ret)
> +			return ret;
> +	} else {
> +		ret = pd692x0_fw_recv_resp(client, 100, "T*\r\n",
> +					   sizeof("T*\r\n") - 1);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return FW_UPLOAD_ERR_NONE;
> +}

...

> +static enum fw_upload_err pd692x0_fw_write(struct fw_upload *fwl,
> +					   const u8 *data, u32 offset,
> +					   u32 size, u32 *written)
> +{
> +	struct pd692x0_priv *priv = fwl->dd_handle;
> +	char line[PD692X0_FW_LINE_MAX_SZ];
> +	const struct i2c_client *client;
> +	int ret, i;
> +	char cmd;
> +
> +	client = priv->client;
> +	priv->fw_state = PD692X0_FW_WRITE;
> +
> +	/* Erase */
> +	cmd = 'E';
> +	ret = i2c_master_send(client, &cmd, 1);
> +	if (ret < 0) {
> +		dev_err(&client->dev,
> +			"Failed to boot programming mode (%pe)\n",
> +			ERR_PTR(ret));
> +		return FW_UPLOAD_ERR_RW_ERROR;
> +	}
> +
> +	ret = pd692x0_fw_recv_resp(client, 100, "TOE\r\n", sizeof("TOE\r\n") - 1);
> +	if (ret)
> +		return ret;
> +
> +	ret = pd692x0_fw_recv_resp(client, 5000, "TE\r\n", sizeof("TE\r\n") - 1);
> +	if (ret)
> +		dev_warn(&client->dev,
> +			 "Failed to erase internal memory, however still try to write Firmware\n");
> +
> +	ret = pd692x0_fw_recv_resp(client, 100, "TPE\r\n", sizeof("TPE\r\n") - 1);
> +	if (ret)
> +		dev_warn(&client->dev,
> +			 "Failed to erase internal memory, however still try to write Firmware\n");
> +
> +	if (priv->cancel_request)
> +		return FW_UPLOAD_ERR_CANCELED;
> +
> +	/* Program */
> +	cmd = 'P';
> +	ret = i2c_master_send(client, &cmd, sizeof(char));
> +	if (ret < 0) {
> +		dev_err(&client->dev,
> +			"Failed to boot programming mode (%pe)\n",
> +			ERR_PTR(ret));
> +		return ret;
> +	}
> +
> +	ret = pd692x0_fw_recv_resp(client, 100, "TOP\r\n", sizeof("TOP\r\n") - 1);
> +	if (ret)
> +		return ret;
> +
> +	i = 0;
> +	while (i < size) {
> +		ret = pd692x0_fw_get_next_line(data, line, size - i);
> +		if (!ret) {
> +			ret = FW_UPLOAD_ERR_FW_INVALID;
> +			goto err;
> +		}
> +
> +		i += ret;
> +		data += ret;
> +		if (line[0] == 'S' && line[1] == '0') {
> +			continue;
> +		} else if (line[0] == 'S' && line[1] == '7') {
> +			ret = pd692x0_fw_write_line(client, line, true);
> +			if (ret)
> +				goto err;
> +		} else {
> +			ret = pd692x0_fw_write_line(client, line, false);
> +			if (ret)
> +				goto err;
> +		}
> +
> +		if (priv->cancel_request) {
> +			ret = FW_UPLOAD_ERR_CANCELED;
> +			goto err;
> +		}
> +	}
> +	*written = i;
> +
> +	msleep(400);
> +
> +	return FW_UPLOAD_ERR_NONE;
> +
> +err:
> +	pd692x0_fw_write_line(client, "S7\r\n", true);

gcc-13 (W=1) seems a bit upset about this.

 drivers/net/pse-pd/pd692x0.c: In function 'pd692x0_fw_write':
 drivers/net/pse-pd/pd692x0.c:861:9: warning: 'pd692x0_fw_write_line' reading 128 bytes from a region of size 5 [-Wstringop-overread]
   861 |         pd692x0_fw_write_line(client, "S7\r\n", true);
       |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 drivers/net/pse-pd/pd692x0.c:861:9: note: referencing argument 2 of type 'const char[128]'
 drivers/net/pse-pd/pd692x0.c:642:12: note: in a call to function 'pd692x0_fw_write_line'
   642 | static int pd692x0_fw_write_line(const struct i2c_client *client,
       |            ^~~~~~~~~~~~~~~~~~~~~

> +	return ret;
> +}

...