| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20231125-topic-rb1_feat-v1-8-11d71b12b058@linaro.org>
Date: Sat, 25 Nov 2023 15:17:36 +0100
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Rob Clark <robdclark@...il.com>,
Abhinav Kumar <quic_abhinavk@...cinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Sean Paul <sean@...rly.run>, David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Loic Poulain <loic.poulain@...aro.org>,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Georgi Djakov <djakov@...nel.org>,
Will Deacon <will@...nel.org>,
Robin Murphy <robin.murphy@....com>,
Joerg Roedel <joro@...tes.org>,
Krishna Manikandan <quic_mkrishn@...cinc.com>,
Robert Marko <robimarko@...il.com>,
Das Srinagesh <quic_gurus@...cinc.com>
Cc: Marijn Suijten <marijn.suijten@...ainline.org>,
Rob Herring <robh@...nel.org>, linux-arm-msm@...r.kernel.org,
dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
iommu@...ts.linux.dev, Konrad Dybcio <konrad.dybcio@...aro.org>
Subject: [PATCH 08/12] arm64: dts: qcom: qcm2290: Add display nodes
Add the required nodes to support display on QCM2290.
Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
arch/arm64/boot/dts/qcom/qcm2290.dtsi | 214 ++++++++++++++++++++++++++++++++++
1 file changed, 214 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index d46e591e72b5..a3edc4667cc5 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -5,6 +5,7 @@
* Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain.
*/
+#include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
#include <dt-bindings/clock/qcom,gcc-qcm2290.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/dma/qcom-gpi.h>
@@ -1105,6 +1106,219 @@ usb_dwc3: usb@...0000 {
};
};
+ mdss: display-subsystem@...0000 {
+ compatible = "qcom,qcm2290-mdss";
+ reg = <0x0 0x05e00000 0x0 0x1000>;
+ reg-names = "mdss";
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface",
+ "bus",
+ "core";
+
+ resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ iommus = <&apps_smmu 0x420 0x2>,
+ <&apps_smmu 0x421 0x0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ mdp: display-controller@...1000 {
+ compatible = "qcom,qcm2290-dpu";
+ reg = <0x0 0x05e01000 0x0 0x8f000>,
+ <0x0 0x05eb0000 0x0 0x2008>;
+ reg-names = "mdp",
+ "vbif";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "iface",
+ "core",
+ "lut",
+ "vsync";
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmpd QCM2290_VDDCX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&mdss_dsi0_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ required-opps = <&rpmpd_opp_min_svs>;
+ };
+
+ opp-192000000 {
+ opp-hz = /bits/ 64 <192000000>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ };
+
+ opp-256000000 {
+ opp-hz = /bits/ 64 <256000000>;
+ required-opps = <&rpmpd_opp_svs>;
+ };
+
+ opp-307200000 {
+ opp-hz = /bits/ 64 <307200000>;
+ required-opps = <&rpmpd_opp_svs_plus>;
+ };
+
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ required-opps = <&rpmpd_opp_nom>;
+ };
+ };
+ };
+
+ mdss_dsi0: dsi@...4000 {
+ compatible = "qcom,qcm2290-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0 0x05e94000 0x0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmpd QCM2290_VDDCX>;
+ phys = <&mdss_dsi0_phy>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ required-opps = <&rpmpd_opp_min_svs>;
+ };
+
+ opp-164000000 {
+ opp-hz = /bits/ 64 <164000000>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ };
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmpd_opp_svs>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi0_phy: phy@...4400 {
+ compatible = "qcom,dsi-phy-14nm-2290";
+ reg = <0x0 0x05e94400 0x0 0x100>,
+ <0x0 0x05e94500 0x0 0x300>,
+ <0x0 0x05e94800 0x0 0x188>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface",
+ "ref";
+
+ power-domains = <&rpmpd QCM2290_VDDMX>;
+ required-opps = <&rpmpd_opp_nom>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ dispcc: clock-controller@...0000 {
+ compatible = "qcom,qcm2290-dispcc";
+ reg = <0x0 0x05f00000 0x0 0x20000>;
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+ <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+ <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+ <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>;
+ clock-names = "bi_tcxo",
+ "bi_tcxo_ao",
+ "gcc_disp_gpll0_clk_src",
+ "gcc_disp_gpll0_div_clk_src",
+ "dsi0_phy_pll_out_byteclk",
+ "dsi0_phy_pll_out_dsiclk";
+ #power-domain-cells = <1>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
remoteproc_mpss: remoteproc@...0000 {
compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas";
reg = <0x0 0x06080000 0x0 0x100>;
--
2.43.0
Powered by blists - more mailing lists