linux-kernel - Re: [PATCH v3] docs: dt-bindings: add DTS Coding Style document

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sun, 26 Nov 2023 18:48:13 +0100
From:   Andrew Lunn <andrew@...n.ch>
To:     Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Cc:     Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Matthias Brugger <matthias.bgg@...il.com>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-mediatek@...ts.infradead.org, Andrew Davis <afd@...com>,
        Arnd Bergmann <arnd@...db.de>,
        Bjorn Andersson <andersson@...nel.org>,
        Chen-Yu Tsai <wens@...nel.org>,
        Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
        Geert Uytterhoeven <geert+renesas@...der.be>,
        Heiko Stuebner <heiko@...ech.de>,
        Jonathan Corbet <corbet@....net>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Michal Simek <michal.simek@....com>,
        Neil Armstrong <neil.armstrong@...aro.org>,
        Nishanth Menon <nm@...com>, Olof Johansson <olof@...om.net>,
        Rafał Miłecki <zajec5@...il.com>,
        linux-rockchip@...ts.infradead.org,
        linux-samsung-soc@...r.kernel.org,
        linux-amlogic@...ts.infradead.org, linux-arm-msm@...r.kernel.org,
        workflows@...r.kernel.org, linux-doc@...r.kernel.org
Subject: Re: [PATCH v3] docs: dt-bindings: add DTS Coding Style document

On Sun, Nov 26, 2023 at 11:38:38AM +0100, Krzysztof Kozlowski wrote:
> On 25/11/2023 20:47, Andrew Lunn wrote:
> >> +=====================================
> >> +Devicetree Sources (DTS) Coding Style
> >> +=====================================
> >> +
> >> +When writing Devicetree Sources (DTS) please observe below guidelines.  They
> >> +should be considered complementary to any rules expressed already in Devicetree
> >> +Specification and dtc compiler (including W=1 and W=2 builds).
> >> +
> >> +Individual architectures and sub-architectures can add additional rules, making
> >> +the style stricter.
> > 
> > It would be nice to add a pointer where such rules are documented.
> 
> Subsystem profile or any other place. The generic doc should not point
> to specific ones.

That is not so friendly for a developer. A reviewer points out that a
file is not consistent with the coding style. So they go away and fix
it, as described here. They then get a second review which say, no,
you to do X, Y and Z, despite them actually following the coding
style.

Maybe add to the paragraph above:

These further restrictions are voluntary, until added to this
document.

This should encourage those architectures to document their coding
style.

> The root node is a bit special, but other than that mixing nodes with
> and without unit address is discouraged practice.

If the root node is special, maybe it needs a few rules of its own?
All properties without an address come first, then properties with
addresses. Sorting within these classes follow the normal rules
already stated?

> >> +Indentation
> >> +-----------
> >> +
> >> +1. Use indentation according to :ref:`codingstyle`.
> >> +2. For arrays spanning across lines, it is preferred to align the continued
> >> +   entries with opening < from the first line.
> >> +3. Each entry in arrays with multiple cells (e.g. "reg" with two IO addresses)
> >> +   shall be enclosed in <>.
> >> +
> >> +Example::
> >> +
> >> +	thermal-sensor@...1000 {
> >> +		compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
> >> +		reg = <0x0 0x0c271000 0x0 0x1000>,
> >> +		      <0x0 0x0c222000 0x0 0x1000>;
> >> +	};
> > 
> > I'm not sure i understand this. Is this example correct?
> > 
> >                 gpio-fan,speed-map = <0    0
> >                                       3000 1
> >                                       6000 2>;
> > 
> > It exists a lot in todays files.
> 
> Depends on the binidng. Is it matrix? If yes, then it is not correct.

It seems to me, rules 2 and 3 should be swapped. You can only align
the <, if you have <. So logically, the rule about having < should
come first.

     Andrew